Sale!

Epro PR6423/003-010 Eddy Current Displacement Sensor Probe

Parameter Specification
Manufacturer & Brand Emerson / Epro
Product Series PR6423 Series Eddy Current Proximity Transducers
Model / Ordering Code PR6423/003-010
Sensor Tip Diameter 8 mm
Integral Cable Length 1.0 meter (-010 configuration)
Measurement Range Nominal 2.0 mm (80 mils) linear range
Scale Factor / Sensitivity Nominal 8.0 V/mm (203.2 mV/mil) with matched converter system
Categories: , , , , SKU: PR6423/003-010 Brand:

Description

Core Product Summary (Brand / Model / Key Attributes)

The Emerson Epro PR6423/003-010 is a heavy-duty, non-contact eddy current displacement sensor designed for non-contact measurement of radial shaft vibration, axial position, and speed in critical rotating machinery. Featuring an 8mm probe head diameter and a 1.0-meter integrated high-frequency coaxial cable, this sensor operates continuously in extreme industrial environments, including steam and gas turbines, high-pressure compressors, large pumps, and gearboxes.

Built on the eddy current physical principle, the PR6423/003-010 measures precise relative distance changes between the sensor tip and a conductive metallic target surface without mechanical contact. The probe features a threaded stainless steel housing, hermetic sealing, and high thermal resistance, making it suitable for direct internal or external mounting on turbomachinery housings and bearing pedestals when paired with a compatible signal converter (such as the CON021 series).

 

Key Technical Specifications

Parameter Specification
Manufacturer & Brand Emerson / Epro
Product Series PR6423 Series Eddy Current Proximity Transducers
Model / Ordering Code PR6423/003-010
Sensor Tip Diameter 8 mm
Integral Cable Length 1.0 meter (-010 configuration)
Measurement Range Nominal 2.0 mm (80 mils) linear range
Scale Factor / Sensitivity Nominal 8.0 V/mm (203.2 mV/mil) with matched converter system
Frequency Response 0 to 20,000 Hz (-3 dB)
Target Material Ferromagnetic steel (standard calibration on 42CrMo4 / AISI 4140)
Operating Temperature (Probe Tip) -35 °C to +200 °C (-31 °F to +392 °F)
Enclosure Protection IP66 / IP68 (probe tip and threaded body)
Connector Type Self-locking miniature coaxial connector (Lemo compatible)

 

Detailed Product Overview

The Epro PR6423/003-010 plays a vital role in machinery protection and condition monitoring networks. Positioned through machine casings or inside bearing housings, the sensor provides real-time, high-speed displacement measurements that allow monitoring systems to detect early signs of mechanical degradation, such as rotor unbalance, shaft misalignment, journal bearing wear, thermal growth, and oil whip.

Constructed with a rugged ceramic/PEEK tip and a corrosion-resistant threaded body, the probe resists mechanical stress, hot oil, steam, and aggressive chemical vapors. The integral 1.0-meter high-frequency coaxial cable transmits the high-frequency excitation signal from the signal converter to the coil inside the probe head. Because eddy current systems form a tuned inductance-capacitance loop, the 1.0m integral cable is engineered to match precise electrical parameters when connected directly or via extension cables to the signal conditioning electronics.

PR6423/003-010

PR6423/003-010

Engineering Selection Highlights

  • Non-Contact Measurement Principle: Provides wear-free, continuous tracking of static shaft position and dynamic vibration up to 20,000 Hz.
  • High Temperature Endurance: Withstands continuous operating temperatures up to 200 °C at the probe tip for installation near turbine bearings.
  • Hermetic & Oil-Tight Seal: Rated IP66/IP68 to prevent oil ingress through the probe body and cable junction under elevated housing pressures.
  • Matched System Inductance: Factory-calibrated electrical characteristics ensure high signal linearity and accurate sensitivity when paired with matched Epro converters.
  • Robust Threaded Construction: Threaded steel sleeve allows precise mechanical zero-gap adjustment during installation.

 

Dimensions, Mounting & Connection Notes

  • Tip Diameter: 8 mm outer diameter tip.
  • Cable Length: 1.0 meter (approx. 3.3 ft) integral coaxial cable.
  • Mounting Method: Screw-in installation using standard metric or imperial threads (depending on specific body option) into rigid bearing housings or bracket assemblies.
  • Mechanical Gap Setting: Mechanical air gap is adjusted using a feeler gauge or by monitoring the DC bias voltage at the converter output during installation (typically set to mid-scale, approx. -10 V DC or 1.0 mm gap).
  • Cable Protection: In high-vibration or dirty environments, route the coaxial cable inside flexible protective conduit to avoid abrasion and mechanical damage.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Signal Converter / Driver Epro CON021, CON011, or MMS6000 Series Conditioners Requires matching signal conditioning electronics to provide excitation and output voltage.
Total System Cable Length Must match converter tuning (e.g., 5m or 10m total system length) Extension cables must be selected to match the required total loop length.
Target Material Calibration Ferromagnetic steel targets Non-ferrous targets (aluminum, stainless steel) alter scale factor and require recalibration.
Mounting Hardware Threaded mounting adapters, locknuts, and junction boxes Ensure proper mechanical securing to prevent probe drift due to machine vibration.

 

FAQ

What is the Epro PR6423/003-010?

The Epro PR6423/003-010 is an 8mm non-contact eddy current proximity sensor probe with a 1.0-meter integral cable, used for measuring shaft vibration and axial displacement on rotating machinery.

What do the numbers in “PR6423/003-010” stand for?

“PR6423” identifies the 8mm eddy current probe family, “/003” designates specific mechanical thread and sleeve options, and “-010” specifies a 1.0-meter integral cable length.

Can the PR6423/003-010 operate as a standalone sensor?

No. The probe must be connected to an Epro signal converter (such as the CON021) to supply high-frequency excitation and convert displacement into a usable DC voltage signal.

What is the temperature rating of the probe head?

The probe tip and body are rated for extreme thermal environments ranging from -35 °C to +200 °C (-31 °F to +392 °F).

What target material is required for accurate readings?

The probe is standard-calibrated for ferromagnetic steel (such as 42CrMo4 or AISI 4140). Other target metals require specific calibration due to differences in electrical conductivity and magnetic permeability.

 

Verification & Troubleshooting Notes

  • DC Gap Voltage Verification: During installation, verify that the static DC output voltage from the signal converter reads within the linear working range (typically -10 V DC at a 1.0 mm nominal gap).
  • Coaxial Connector Integrity: Ensure the miniature coaxial Lemo connector between the probe cable and extension cable is clean, dry, and fully locked. Moisture or contamination inside the connector will degrade signal quality.
  • Target Surface Runout: Inspect the shaft target area for mechanical scratches, keyways, or residual magnetism, which can induce false electrical runout signals in the vibration reading.
  • Cable Strain Relief: Secure the integral 1.0-meter cable with appropriate clamps to prevent mechanical strain on the probe cable entry point.