Description
Core Product Summary
The EPRO PR6423/003-030-CN is a hazardous-area 8 mm eddy-current sensor for rotating-machinery monitoring. It measures radial and axial shaft dynamic displacement, position, eccentricity and speed/key signals in critical turbomachinery applications.
The sensor provides a 3 mm linear measuring range, 8 V/mm incremental scale factor and a 3 m cable. It is designed for use with a compatible EPRO / Emerson signal converter, such as the CON021, which conditions the sensor signal for a machinery monitoring or protection system.
Key Technical Specifications
| Item | Verified Information |
|---|---|
| Manufacturer / product family | EPRO / Emerson, PR6423 eddy-current sensor series |
| Exact model | PR6423/003-030-CN |
| Sensor type | Non-contact 8 mm eddy-current sensor |
| Linear measuring range | 3 mm (118 mils) |
| Initial air gap | 0.5 mm (20 mils) |
| Incremental scale factor | 8 V/mm (203.2 mV/mil), ±5%, 0 to +45 °C |
| Deviation from best-fit straight line | ±0.025 mm (±1 mil), 0 to +45 °C |
| Minimum shaft diameter | 25 mm (0.79 in) |
| Cable length | 3 m |
| Sensor operating temperature, including 1 m cable | -35 to +200 °C |
| Cable and connector temperature range | -35 to +150 °C |
| Protection class | IP66 |
| Case thread | M10 x 1 or 3/8-24 UNF |
| Hazardous-area approvals | ATEX, IECEx and CSA intrinsic safety (ia) |
| Temperature classifications | T6 at ambient temperature up to +64 °C; T4 up to +114 °C; T3 up to +160 °C |
| Compliance | CE, ATEX, IECEx and CSA |
| Typical converter | CON021 signal converter |
Engineering Selection Highlights
- Hazardous-area configuration: The -CN suffix identifies the hazardous-area version of the PR6423/003-030 sensor, with ATEX, IECEx and CSA intrinsic-safety documentation.
- 3 mm measuring range: The /003 designation identifies a 3 mm linear measuring range, so the expected shaft movement and converter calibration must fit this span.
- 3 m cable configuration: The /030 designation identifies a 3 m cable, which should match the installed distance between the probe and its signal converter.
- Shaft-displacement monitoring: The sensor measures radial and axial shaft dynamic displacement without contacting the shaft, supporting vibration, position, eccentricity and speed/key monitoring.
- Calibration dependency: The 8 V/mm incremental scale factor, 0.5 mm initial air gap and 3 mm measuring range must match the configured converter and monitoring-system input.
- Temperature limits: The sensor body is rated to +200 °C including 1 m of cable, while the cable and connector are limited to +150 °C; these limits must be respected in hot machinery installations.
- Converter matching: The PR6423/003-030-CN requires a compatible EPRO / Emerson signal converter, such as the CON021, to produce the conditioned output used by monitoring or protection equipment.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Sensor family | EPRO / Emerson PR6423 | The PR6423/003-030-CN is an 8 mm eddy-current sensor in the PR6423 series. |
| Signal converter | Compatible EPRO / Emerson converter, including CON021 | The converter completes the measuring chain and provides the conditioned output signal. |
| Converter connection | Sensor-to-converter connection | Confirm the installed converter type, connector arrangement and cable length before replacement. |
| Target material | Electrically conducting steel, cylindrical shaft | The target surface must be compatible with the eddy-current measurement principle and calibration. |
| Target geometry | Shaft diameter of 25 mm or greater | The documented minimum shaft diameter is 25 mm. |
| Monitoring-system input | Conditioned converter output | The monitoring system must be configured for the converter’s output range and calibration. |
| Hazardous-area installation | ATEX, IECEx and CSA intrinsic-safety requirements | The installed converter, barriers, cable system and documentation must match the required area classification. |
| Measurement applications | Radial and axial shaft displacement, vibration, position, eccentricity and speed | The appropriate measurement function depends on probe orientation, target geometry and monitoring-system configuration. |

PR6423/003-030-CN
Dimensions, Mounting & Connection Notes
| Item | Verified Information |
|---|---|
| Sensor type | 8 mm eddy-current sensor |
| Cable length | 3 m |
| Initial air gap | 0.5 mm |
| Linear measuring range | 3 mm |
| Protection class | IP66 |
| Case thread | M10 x 1 or 3/8-24 UNF |
| Sensor operating temperature | -35 to +200 °C, including 1 m cable |
| Cable and connector temperature range | -35 to +150 °C |
The sensor must be mounted so that its tip is positioned at the specified initial air gap from the shaft or target surface. The 3 m cable connects the sensor to its compatible signal converter. In hazardous-area installations, the complete measuring chain, including converter, barriers and cabling, must comply with the applicable intrinsic-safety requirements and approval documentation.
Detailed Product Overview
The EPRO PR6423/003-030-CN is a hazardous-area 8 mm eddy-current sensor designed for shaft displacement and vibration measurement in rotating machinery. It belongs to the PR6423 sensor family and uses the eddy-current principle to measure the distance between the sensor tip and an electrically conducting steel target.
The sensor provides a 3 mm linear measuring range and an incremental scale factor of 8 V/mm, with a tolerance of ±5% over 0 to +45 °C. Its deviation from the best-fit straight line is ±0.025 mm over the same temperature range. The initial air gap is 0.5 mm, defining the starting position for the calibrated measuring range.
The PR6423/003-030-CN is intended for cylindrical steel shafts with a minimum diameter of 25 mm. It supports radial and axial shaft dynamic displacement, position, eccentricity and speed/key measurement. The /030 designation identifies a 3 m cable, which connects the probe to a compatible EPRO / Emerson signal converter such as the CON021.
The sensor body is rated for operation from -35 to +200 °C when including 1 m of cable, while the cable and connector are rated from -35 to +150 °C. The housing provides IP66 protection and is available with M10 x 1 or 3/8-24 UNF case threads.
The -CN version carries ATEX, IECEx and CSA intrinsic-safety documentation. Temperature classifications are T6 at ambient temperatures up to +64 °C, T4 up to +114 °C and T3 up to +160 °C. For hazardous-area use, the complete measuring chain—including the converter, barriers, cable system and installation documentation—must be checked against the required area classification.
For replacement or service planning, the complete model designation, cable length, installed converter, air-gap setting, target material and monitoring-system calibration should be verified before substitution.
Applications & System Role
The PR6423/003-030-CN forms the sensing element of an eddy-current machinery-monitoring chain. It observes the gap between its tip and a rotating shaft, producing a signal that changes with shaft displacement and vibration.
In a turbomachinery monitoring or protection system, the sensor can be applied to radial shaft vibration, axial displacement, shaft position, eccentricity and speed/key measurement. Its output is sent to a compatible signal converter, which conditions the signal for a machinery-health monitor, protection relay or other monitoring equipment.
The sensor is intended for critical rotating equipment, including steam, gas and hydro turbines, compressors, gearboxes, pumps and fans. Its suitability depends on correct probe orientation, target material, air-gap setting, cable length, converter calibration and hazardous-area installation compliance.
FAQ
What is the EPRO PR6423/003-030-CN?
It is a hazardous-area 8 mm eddy-current sensor for measuring shaft displacement, vibration, position, eccentricity and speed in rotating machinery.
What does the -CN suffix indicate?
It identifies the hazardous-area version of the sensor, with ATEX, IECEx and CSA intrinsic-safety documentation.
What is the measuring range of the PR6423/003-030-CN?
It has a 3 mm linear measuring range.
What is the sensitivity of the PR6423/003-030-CN?
Its incremental scale factor is 8 V/mm (203.2 mV/mil), ±5%, over 0 to +45 °C.
What does the /030 designation mean?
It identifies the 3 m cable version of the PR6423/003 sensor.
What air gap is required?
The initial air gap is 0.5 mm.
Which converter is used with the PR6423/003-030-CN?
It is used with a compatible EPRO / Emerson signal converter, including the CON021.
What are the temperature limits?
The sensor, including 1 m of cable, is rated from -35 to +200 °C; the cable and connector are rated from -35 to +150 °C.
Where is this sensor used?
It is used in critical turbomachinery such as steam, gas and hydro turbines, compressors, gearboxes, pumps and fans for shaft displacement, vibration, position, eccentricity and speed monitoring.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626