Description
Core Product Summary
The EPRO PR6423/003-030 is a non-contact 8 mm eddy-current displacement sensor for rotating-machinery monitoring. It measures radial and axial shaft dynamic displacement, position, eccentricity and speed/key signals in critical turbomachinery applications.
The sensor provides a 2 mm linear measuring range, 8 V/mm sensitivity and a 3 m cable. It is designed for use with a compatible EPRO / Emerson signal converter, which conditions the sensor signal and provides the output required by machinery monitoring or protection equipment.
Key Technical Specifications
| Item | Verified Information |
|---|---|
| Manufacturer / product family | EPRO / Emerson, PR6423 eddy-current sensor series |
| Exact model | PR6423/003-030 |
| Sensor type | Non-contact 8 mm eddy-current sensor |
| Linear measuring range | 2 mm (80 mils) |
| Sensitivity | 8 V/mm (203.2 mV/mil) |
| Linearity error | ≤ ±1% after calibration |
| Initial air gap | 0.5 mm (20 mils) |
| Nominal gap at center of range | 1.5 mm (0.06 in) |
| Target material | Electrically conducting steel; cylindrical shaft |
| Minimum shaft diameter | Greater than 25 mm (0.98 in) |
| Maximum shaft surface speed | 0 to 2,500 m/s |
| Cable length | 3 m, identified by the /030 designation |
| Operating temperature | -40 to +70 °C (-40 to 158 °F) |
| Sensor connection | Compatible with an EPRO / Emerson signal converter |
| Typical converter | CON021 signal converter |
Engineering Selection Highlights
- 8 mm probe family: The PR6423/003-030 belongs to the 8 mm PR6423 eddy-current sensor family, making it suitable where a 2 mm linear measuring range and compact probe installation are required.
- 3 m cable configuration: The /030 designation identifies a 3 m cable, so the installed distance from the probe to its signal converter should be checked before replacement.
- Shaft-displacement measurement: The sensor measures radial and axial shaft dynamic displacement without contacting the shaft, supporting vibration, position, eccentricity and speed/key monitoring.
- Calibration dependency: The 8 V/mm sensitivity, 0.5 mm initial air gap and 1.5 mm nominal center gap must match the configured converter and monitoring-system calibration.
- Target requirements: The measured shaft or target must be electrically conducting steel, with a diameter greater than 25 mm for negligible target-size error.
- Converter matching: The PR6423/003-030 requires a compatible EPRO / Emerson signal converter, such as the CON021, to produce the conditioned voltage output used by monitoring or protection equipment.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Sensor family | EPRO / Emerson PR6423 | The PR6423/003-030 is an 8 mm eddy-current sensor in the PR6423 series. |
| Signal converter | Compatible EPRO / Emerson converter, including CON021 | The converter completes the measuring chain and supplies the conditioned output signal. |
| Converter connection | Sensor-to-converter connection | Confirm the installed converter type, connector arrangement and cable length before replacement. |
| Target material | Electrically conducting steel, cylindrical shaft | The target surface must be compatible with the eddy-current measurement principle and calibration. |
| Target geometry | Shaft diameter greater than 25 mm | Target surfaces smaller than 25 mm may introduce an error of 1% or greater. |
| Monitoring-system input | Conditioned converter output | The monitoring system must be configured for the converter’s output range and calibration. |
| Measurement applications | Radial and axial shaft displacement, vibration, position, eccentricity and speed | The appropriate measurement function depends on probe orientation, target geometry and monitoring-system configuration. |

PR6423/003-030

PR6423/003-030

PR6423/003-030
Dimensions, Mounting & Connection Notes
| Item | Verified Information |
|---|---|
| Sensor type | 8 mm eddy-current sensor |
| Cable length | 3 m |
| Initial air gap | 0.5 mm (20 mils) |
| Nominal gap at center of range | 1.5 mm (0.06 in) |
| Operating temperature | -40 to +70 °C |
| Maximum shaft surface speed | 2,500 m/s |
The sensor must be mounted so that its tip is positioned at the required air gap from the shaft or target surface. The initial air gap is 0.5 mm, while the nominal gap at the center of the measuring range is 1.5 mm. The 3 m cable connects the sensor to its compatible signal converter; cable routing, shielding and mechanical protection should follow the applicable monitoring-system installation requirements.
Detailed Product Overview
The EPRO PR6423/003-030 is a non-contact 8 mm eddy-current sensor designed for shaft displacement and vibration measurement in rotating machinery. It belongs to the PR6423 sensor family and uses the eddy-current principle to measure the distance between the sensor tip and an electrically conducting steel target.
The sensor provides a 2 mm linear measuring range and a sensitivity of 8 V/mm. Its linearity error is no more than ±1% after calibration. The initial air gap is 0.5 mm, while the nominal gap at the center of the measuring range is 1.5 mm. These values define the mechanical installation position and the measurement span that the associated converter and monitoring system must be configured to interpret.
The PR6423/003-030 is intended for use with cylindrical steel shafts. The shaft diameter should be greater than 25 mm to keep target-size error negligible; smaller target surfaces may introduce an error of 1% or greater. The sensor supports shaft surface speeds from 0 to 2,500 m/s and operates from -40 to +70 °C.
The /030 designation identifies a 3 m cable. The cable connects the probe to a compatible EPRO / Emerson signal converter, such as the CON021. The converter supplies excitation, processes the eddy-current signal and provides the conditioned output used by machinery monitoring or protection equipment.
In a monitoring system, the PR6423/003-030 can measure radial and axial shaft dynamic displacement, position, eccentricity and speed/key signals. Correct probe orientation, air-gap setting, target material, cable integrity and converter calibration are essential for accurate measurement and reliable machinery protection.
Applications & System Role
The PR6423/003-030 forms the sensing element of an eddy-current machinery-monitoring chain. It observes the gap between its tip and a rotating shaft, producing a signal that changes with shaft displacement and vibration.
In a turbomachinery monitoring or protection system, the sensor can be applied to radial shaft vibration, axial displacement, shaft position, eccentricity and speed/key measurement. Its output is sent to a compatible signal converter, which conditions the signal for a machinery-health monitor, protection relay or other monitoring equipment.
The sensor is intended for critical rotating equipment, including steam, gas and hydro turbines, compressors, gearboxes, pumps and fans. Its suitability depends on correct probe orientation, target material, air-gap setting, cable length and converter calibration.
FAQ
What is the EPRO PR6423/003-030?
It is a non-contact 8 mm eddy-current sensor for measuring shaft displacement, vibration, position, eccentricity and speed in rotating machinery.
What is the measuring range of the PR6423/003-030?
It has a 2 mm linear measuring range.
What is the sensitivity of the PR6423/003-030?
Its sensitivity is 8 V/mm (203.2 mV/mil).
What does the /030 designation mean?
It identifies the 3 m cable version of the PR6423/003 sensor.
What air gap is required?
The initial air gap is 0.5 mm, and the nominal gap at the center of the measuring range is 1.5 mm.
What target material is required?
The sensor requires an electrically conducting steel target, typically a cylindrical shaft.
Which converter is used with the PR6423/003-030?
It is used with a compatible EPRO / Emerson signal converter, including the CON021.
Where is this sensor used?
It is used in critical turbomachinery such as steam, gas and hydro turbines, compressors, gearboxes, pumps and fans for shaft displacement, vibration, position, eccentricity and speed monitoring.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626