Sale!

EPRO PR6423/010-040+CON021 8 mm Eddy Current Sensor System

The EPRO PR6423/010-040 + CON021 is a non-contact eddy-current measuring chain for rotating-machinery monitoring. It consists of an 8 mm PR6423 sensor with a 2 mm linear measuring range and 10 m armored cable, together with a CON021 signal converter.

Categories: , , , , Brand:

Description

Core Product Summary

The EPRO PR6423/010-040 + CON021 is a non-contact eddy-current measuring chain for rotating-machinery monitoring. It consists of an 8 mm PR6423 sensor with a 2 mm linear measuring range and 10 m armored cable, together with a CON021 signal converter.

The system measures radial and axial shaft dynamic displacement, position, eccentricity and speed/key signals. It is intended for critical turbomachinery such as steam, gas and hydro turbines, compressors, pumps and fans, where the conditioned converter output is supplied to machinery monitoring or protection equipment.

 

Key Technical Specifications

Item Verified Information
Manufacturer / product family EPRO / Emerson, PR6423 eddy-current sensor series
Exact configuration PR6423/010-040 + CON021
Sensor type Non-contact 8 mm eddy-current sensor
Linear measuring range ±1.0 mm (2 mm total)
Recommended dynamic range 50–500 µm peak-to-peak
Sensitivity for 42CrMo4 target 8 V/mm
Approximate center-point distance 1.5 mm
Basic air gap Approximately 0.4–0.7 mm
Target material Electrically conducting material; reference material 42CrMo4 / SAE 4140
Minimum shaft diameter Greater than 40 mm
Minimum target collar height Greater than 25 mm
Maximum shaft surface speed 0–2,500 m/s
Cable length 10 m armored cable, identified by the /040 designation
Sensor thread M10 x 1
Converter CON021 signal converter
Converter connection Self-locking, waterproof connector for CON021
Sensor operating temperature -35 to +180 °C; short time up to +200 °C
Sensor pressure resistance 10,000 hPa at sensor head
Vibration resistance 5 g at 60 Hz

 

Engineering Selection Highlights

  • Complete measuring chain: The PR6423/010-040 probe and CON021 converter form a matched eddy-current measuring system; the converter conditions the probe signal for the monitoring or protection system.
  • 2 mm measuring range: The /010 designation identifies the 2 mm-range sensor configuration, so the expected shaft movement and monitoring-system calibration must fit this span.
  • 10 m armored cable: The /040 designation identifies the 10 m armored-cable version, which should match the installed distance and mechanical-protection requirements.
  • Shaft-displacement monitoring: The sensor measures relative radial and axial shaft displacement and dynamic vibration without contacting the shaft.
  • Calibration dependency: The 8 V/mm sensitivity, approximately 1.5 mm center-point distance and 2 mm measuring range must match the configured converter and monitoring-system input.
  • Target requirements: The measured shaft or target must be electrically conducting, with a shaft diameter greater than 40 mm and a target collar height greater than 25 mm for the standard PR6423 configuration.
  • Converter supply match: The CON021 requires a negative DC supply within its documented range; the selected output range determines the required supply window.
PR6423/010-040+CON021

PR6423/010-040+CON021

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Sensor / converter pairing PR6423/010-040 probe with CON021 converter The CON021 completes the calibrated measuring chain and supplies the conditioned output signal.
Sensor family EPRO / Emerson PR6423 The PR6423/010-040 is an 8 mm eddy-current sensor in the PR6423 series.
Converter compatibility CON011, CON021, CON031 or CON041; MMS 3000 integrated converters; AMS 9360 transmitter The CON021 is one of the documented converters for PR642x eddy-current measuring chains.
Target material Electrically conducting material; 42CrMo4 / SAE 4140 reference Other materials require a converter adjustment or material sample for calibration.
Target geometry Shaft diameter greater than 40 mm; target collar height greater than 25 mm These are the documented minimum dimensions for the standard PR6423 measuring target.
Monitoring-system input Conditioned converter output The output range and calibration must match the monitoring system input configuration.
Measurement applications Shaft vibration, shaft displacement and speed Speed measurement is not supported when using the CSI 9360 transmitter.
Installation requirement Stiff, vibration-free holder; 45° free space around sensor head The sensor must be installed with correct clearance and alignment to preserve measuring range and linearity.

 

Dimensions, Mounting & Connection Notes

Item Verified Information
Sensor type 8 mm eddy-current sensor
Sensor thread M10 x 1
Cable length 10 m armored cable
Basic air gap Approximately 0.4–0.7 mm
Center-point distance Approximately 1.5 mm
Sensor operating temperature -35 to +180 °C; short time up to +200 °C
Sensor pressure resistance 10,000 hPa at sensor head
Sensor fastening torque Maximum 15 Nm (1.5 kpm)
Cable bending radius Minimum 25 mm; minimum 35 mm for metal-protected cable
Converter mounting Panel-mount converter for installation in a mounting box

The sensor must be installed in a stiff, vibration-free holder using its M10 x 1 thread. The final air gap is adjusted using the complete measuring chain and the converter output voltage. At least 45° of free space must be maintained around the sensor head, and the maximum axial tilting angle must be less than 2°. The 10 m armored cable connects the sensor to the CON021 converter and must not be shortened.

 

Detailed Product Overview

The EPRO PR6423/010-040 + CON021 is a complete eddy-current measuring chain consisting of an 8 mm PR6423 sensor and a CON021 signal converter. The PR6423/010-040 is a 2 mm-range probe fitted with a 10 m armored cable, while the CON021 provides signal conditioning and the voltage output required by machinery monitoring or protection equipment.

The PR6423 sensor operates without contacting the shaft. It measures relative displacement between the sensor tip and an electrically conducting target, with a sensitivity of 8 V/mm for the standard 42CrMo4 target material. The nominal static measuring range is ±1.0 mm, giving a total range of 2 mm. The recommended dynamic peak-to-peak range is 50 to 500 µm.

The sensor is designed for cylindrical shafts with a diameter greater than 40 mm and a target collar height greater than 25 mm. The basic air gap is approximately 0.4 to 0.7 mm, while the approximate distance at the center point of the converter output signal is 1.5 mm. These values define the mechanical installation window and the measurement span that the monitoring system must be configured to interpret.

The /040 designation identifies a 10 m armored cable. The cable connects the probe to the CON021 converter through a self-locking, waterproof connector. The converter supplies excitation, processes the eddy-current signal and provides the conditioned output used by machinery monitoring or protection equipment.

The PR6423 sensor operates from -35 to +180 °C, with short-time operation up to +200 °C. Its sensor head is pressure-resistant to 10,000 hPa, and it withstands vibration of 5 g at 60 Hz. The sensor cable is PTFE-insulated and resistant to oil and chemicals.

For integration, the probe and converter should be treated as a calibrated pair. The target material, probe range, air gap, converter output range, monitoring-system input scaling and cable routing must all be consistent with the installed machinery-monitoring configuration. The sensor must be mounted in a stiff, vibration-free holder with the required free space and alignment to preserve measuring range and linearity.

 

Applications & System Role

The PR6423/010-040 + CON021 forms the front-end measuring chain of a machinery monitoring or protection system. The non-contact sensor observes shaft movement relative to its mounted position, while the CON021 converts the eddy-current sensor signal into a conditioned voltage output.

Typical measurement roles include radial shaft vibration, axial shaft displacement, shaft position, eccentricity and speed/key monitoring. In a turbomachinery protection architecture, the conditioned output can be supplied to a monitoring module or protection system for alarm evaluation, trip logic and machinery-condition analysis.

The system is intended for critical rotating equipment, including steam, gas and hydro turbines, compressors, gearboxes, pumps and fans. Its suitability depends on correct sensor mounting, target material, air-gap setting, cable integrity and matching converter output configuration.

 

FAQ

What is the EPRO PR6423/010-040 + CON021?
It is a non-contact eddy-current measuring chain consisting of an 8 mm PR6423 sensor with a 2 mm measuring range and 10 m armored cable, plus a CON021 signal converter.

What does the PR6423/010-040 measure?
It measures radial and axial shaft dynamic displacement, vibration, position, eccentricity and speed/key signals.

What does the CON021 do?
The CON021 conditions the PR6423 sensor signal and provides a voltage output for machinery monitoring or protection equipment.

What is the measuring range of this configuration?
The sensor has a nominal static measuring range of ±1.0 mm, or 2 mm total.

What is the sensitivity of the PR6423/010-040?
Its sensitivity is 8 V/mm for a 42CrMo4 / SAE 4140 target material.

What cable length does the /040 designation indicate?
The /040 designation identifies the 10 m armored-cable version of the PR6423/010 sensor.

What target dimensions are required?
The standard PR6423 application requires a shaft diameter greater than 40 mm and a target collar height greater than 25 mm.

What supply voltage does the CON021 require?
It requires -23 to -32 V DC for a -4 to -20 V output setting, or -21 to -32 V DC for a -2 to -18 V output setting.

Where is this measuring chain used?
It is used in critical turbomachinery such as steam, gas and hydro turbines, compressors, gearboxes, pumps and fans for shaft displacement, vibration, position, eccentricity and speed monitoring.