Description
Core Product Summary
The EPRO PR6424/010-010 is a 16 mm eddy current sensor designed for non-contact measurement of shaft displacement and position in rotating machinery. It belongs to the PR6424 sensor series and can be used in suitable measurement chains for monitoring shaft movement, eccentricity, and vibration-related displacement.
The sensor is intended to operate with a compatible signal converter. Selection should account for the full order code, mounting configuration, cable termination, target material, measurement range, and receiving monitor requirements. The sensor model alone does not establish the complete measurement-chain configuration.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | EPRO / Emerson |
| Model | PR6424/010-010 |
| Product type | Eddy current displacement sensor |
| Sensor series | PR6424 |
| Sensor diameter | 16 mm |
| Measurement principle | Non-contact eddy current |
| Sensitivity | 4 V/mm |
| Linearity | ≤ ±1.5% |
| Static measurement range | ±2.0 mm |
| Nominal center gap | Approximately 2.7 mm |
| Reference target material | 42CrMo4 / SAE 4140 steel |
| Sensor connection | Configuration-dependent cable and connector arrangement |
| Signal converter | Compatible converter required for a complete measurement chain |
Engineering Selection Highlights
- Sensor dimensions: The PR6424 uses a 16 mm sensing head, so mounting clearance and the available shaft measurement area must be checked.
- Measurement scaling: The documented sensitivity is 4 V/mm; use the correct calibration data when converting voltage into displacement.
- Target material: Measurement-chain calibration depends on the target material. The standard reference is 42CrMo4 / SAE 4140 steel.
- Converter matching: The probe must be paired with a compatible converter and configured measurement chain.
- Mounting stability: A rigid, vibration-free sensor holder helps prevent mounting movement from affecting the measurement.
- Cable routing: Protect the cable from mechanical damage, twisting, and contact with rotating machine parts.
System Compatibility & Integration Requirements
| Item / Dependency | Requirement | Practical Note |
|---|---|---|
| Measurement converter | Compatible EPRO converter, such as an applicable CON-series unit | Select the converter according to the sensor configuration and required output. |
| Target material | Calibration-compatible conductive target | A material change may affect measurement characteristics. |
| Monitoring equipment | Compatible displacement or vibration input | Confirm signal range, scaling, and channel configuration. |
| Sensor mounting | Rigid, vibration-free holder | Ensure adequate clearance around the sensor head. |
| Cabling | Matching sensor cable and connector | Confirm the complete ordering code and termination. |

PR6424/010-010

PR6424/010-010
Dimensions, Mounting & Connection Notes
The PR6424/010-010 should be installed in accordance with the PR6424 sensor-series mounting instructions.
- Use a rigid mounting holder with the appropriate sensor thread.
- Maintain the specified clearance around the sensor head.
- Avoid bending, twisting, or crushing the sensor cable.
- Route cables away from rotating components and sources of mechanical damage.
- Adjust the sensor-to-target gap using the complete sensor and converter measurement chain.
- Confirm the actual mechanical drawing and cable arrangement before preparing the mounting hardware.
Detailed Product Overview
Non-contact shaft measurement
The PR6424/010-010 belongs to the EPRO PR6424 eddy current sensor family. Eddy current sensing detects changes in the electromagnetic interaction between the sensor and a metallic target. Changes in the sensor-to-shaft gap can then be used to measure relative displacement without mechanical contact between the sensing tip and the shaft.
For engineering selection, the sensor’s measuring range, sensitivity, target material, and physical installation geometry should be evaluated together. These factors affect the usable measurement range and the relationship between the electrical signal and actual shaft movement.
Integration with signal-conditioning equipment
The PR6424 sensor operates as part of a measurement chain that includes compatible signal-conversion equipment. The converter processes the sensor response and supplies a signal suitable for the connected monitoring system.
The exact converter and output configuration should be selected according to the required measurement function and receiving instrument. A sensor-only order code does not establish that a converter, extension cable, or other accessories are included in the supplied package.
Installation and measurement accuracy
Mechanical installation is an important part of the measurement system. The sensor holder must remain stable, the sensing face must have suitable clearance from surrounding components, and the cable must be routed without interference from moving machinery.
Calibration also depends on the target material. The standard PR642x measurement-chain reference material is 42CrMo4 / SAE 4140 steel. If the actual target differs, its effect on the measurement chain should be considered during configuration.
Procurement considerations
When specifying PR6424/010-010 for a replacement or new installation, compare the complete model code against the installed sensor documentation. Confirm the cable termination, mounting dimensions, converter pairing, measurement range, and required monitoring input before ordering. These checks help prevent a physically similar sensor from being selected for an incompatible measurement chain.
Applications & System Role
The EPRO PR6424/010-010 functions as a non-contact displacement sensor within a rotating machinery measurement chain. It detects changes in the distance between the probe tip and a suitable metallic target and provides the sensor response to compatible signal-conditioning equipment.
Its measurement role can include:
- Shaft displacement measurement.
- Radial or axial shaft movement monitoring.
- Shaft eccentricity measurement.
- Vibration-related displacement monitoring.
- Speed measurement when used in an appropriate measurement configuration.
The sensor is one component of the measurement chain. Signal conditioning, calibrated output, monitoring thresholds, and any machinery protection actions depend on the selected converter and downstream monitoring equipment.
FAQ
What is the EPRO PR6424/010-010?
It is a non-contact eddy current displacement sensor in the EPRO PR6424 series, intended for measurement of relative movement between the sensor and a metallic target.
What is the sensor used for?
Its measurement functions include shaft displacement and position monitoring, with vibration-related displacement and other measurements depending on the complete measurement-chain configuration.
What is the sensor diameter?
The PR6424 series uses a 16 mm sensing head.
Does the PR6424/010-010 require a signal converter?
A compatible converter is required for a complete EPRO eddy current measurement chain. The appropriate converter depends on the sensor configuration and the intended monitoring application.
Which target material is used for calibration?
The standard reference material is 42CrMo4 / SAE 4140 steel. Different target materials may require additional consideration during measurement-chain calibration.
What should be confirmed before replacing an existing sensor?
Confirm the complete part number, mounting arrangement, cable and connector configuration, converter compatibility, measurement range, and calibration requirements.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626