Description
Core Product Summary
The EPRO PR9268/601-000 is an electrodynamic velocity sensor designed to measure absolute vibration on machinery housings and bearing supports. It belongs to the PR9268/60x-000 product group, which features a vertical high-temperature configuration for industrial machinery monitoring.
The sensor is self-powered and uses an electrodynamic measuring principle. The model’s ordering code identifies a 5-meter armored cable with a Harting plug. Its high-temperature series specification supports operation from -20°C to +200°C, making it suitable for applications where conventional lower-temperature sensor variants may not meet the installation requirements. Correct selection requires matching the sensor’s orientation, electrical characteristics, connector arrangement, and monitoring-system input requirements.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer / Brand | Emerson / EPRO |
| Model | PR9268/601-000 |
| Product Type | Electrodynamic velocity sensor |
| Measurement Principle | Electrodynamic, self-powered |
| Measurement Purpose | Absolute machinery vibration measurement |
| Sensor Orientation | Vertical high-temperature version |
| Sensitivity | 22.0 mV/mm/s ±5% at Pin 3 with 100 Ω load |
| Alternative Sensitivity | 16.7 mV/mm/s ±5% at Pin 1 with 50 Ω load; 16.7 mV/mm/s ±5% at Pin 4 with 20 Ω load |
| Frequency Range | 10–1000 Hz |
| Natural Frequency | 8 Hz ±1.5 Hz at 20°C |
| Transverse Sensitivity | 0.10 at 80 Hz |
| Vibration Amplitude / Mechanical Limit | 3000 µm (4000 µm) peak-to-peak, as listed in the manufacturer’s series specification |
| Amplitude Linearity | Less than 2% |
| Maximum Acceleration | 10 g peak-to-peak continuous; 20 g peak-to-peak intermittent |
| Maximum Transverse Acceleration | 2 g |
| Damping Factor | Approximately 0.7 at 20°C; approximately 0.5 at 200°C |
| Resistance | 3270 Ω ±10% at Pin 3; 3770 Ω ±10% at Pin 1 |
| Inductance | ≤160 mH |
| Active Capacitance | Insignificant, per manufacturer specification |
| Power Supply | Self-powered |
| Operating Temperature | -20°C to +200°C |
| Protection Rating | IP65 |
| Relative Humidity | 0–100%, non-condensing |
| Housing Material | Stainless steel |
| Cable | 5 m armored cable |
| Cable End | Harting plug |
| Approximate Weight | 1050 g for the PR9268/60x-000 and /70x-000 series group |
Specifications above are based on the PR9268/60x-000 series documentation. Electrical sensitivity and resistance depend on the specified connector pin and load. Confirm the applicable pinout and installation documentation before connecting the sensor.
Engineering Selection Highlights
- High-temperature capability: The PR9268/60x-000 series is specified for operation up to 200°C, subject to the applicable installation and connector temperature limits.
- Vertical measurement configuration: Designed for vertical vibration measurement. Preserve the intended mounting orientation when selecting or replacing the sensor.
- Self-powered operation: The electrodynamic measuring element generates its measurement signal without an external sensor excitation supply.
- Defined electrical loading: Sensitivity varies with the connector pin and load resistance. The receiving monitor input must be compatible with the selected connection.
- Armored cable arrangement: The 5-meter armored cable provides a protected cable run between the sensor and its termination.
- Industrial environmental protection: The series is specified with an IP65 protection rating.
- Exact model identification: The full model suffix matters. Do not substitute another PR9268 variant based only on the shared series name.

PR9268/601-000

PR9268/601-000
System Compatibility & Integration Requirements
The PR9268/601-000 is intended for use in machinery vibration measurement and protection arrangements that accept electrodynamic velocity sensor signals. Compatibility depends on the installed monitoring hardware and its input configuration.
Before integration, verify the following:
- Input characteristics: Confirm that the monitor accepts the sensor’s signal type and the applicable sensitivity and load specifications.
- Connector pinout: Verify the Harting connector pin assignment and use the correct signal connections.
- Channel configuration: Configure the monitoring channel for the correct sensor sensitivity and vibration measurement units.
- Measurement orientation: Confirm that the installed sensor position matches the required vertical measurement direction.
- Cable routing: Protect the armored cable from mechanical damage, excessive bending, and interference with moving equipment.
- Alarm and trip settings: Confirm channel scaling and alarm thresholds against the approved machinery protection design.
The PR9268 family is associated with machinery monitoring applications, but compatibility with a specific rack, monitor module, or protection system should be established from that system’s documentation rather than assumed from the sensor model alone.
Dimensions, Mounting & Connection Notes
- Install the sensor using the mounting interface and mechanical drawing specified for the PR9268/60x-000 configuration.
- Maintain the intended vertical measurement orientation and ensure that the mounting surface provides a secure mechanical connection.
- The model code specifies a 5-meter armored cable and a Harting plug. Confirm the mating connector and wiring arrangement before installation.
- Route the cable to avoid abrasion, crushing, excessive tensile loading, and contact with hot or moving components beyond the cable’s rated conditions.
- Verify that the complete sensor and connector installation remains within the applicable temperature limits.
- Check the manufacturer’s dimensional drawing and the equipment mounting drawing before fabricating brackets or replacing an installed sensor.
Detailed dimensional values and the complete connector pinout should be taken from the applicable manufacturer drawings; they are not reproduced here because the available specification text does not establish all installation dimensions.
Detailed Product Overview
The EPRO PR9268/601-000 belongs to the high-temperature vertical branch of the PR9268 electrodynamic velocity sensor family. It is designed for applications that require measurement of absolute vibration on a machine structure, such as a housing or bearing support.
Its electrodynamic operating principle provides a velocity-related output without requiring external excitation of the sensing element. The PR9268/60x-000 series documentation specifies a 10–1000 Hz frequency range and provides different sensitivity values according to the connector pin and associated load. These electrical details should be considered when configuring a monitoring channel or replacing an existing sensor.
The /601-000 model code identifies the vertical high-temperature configuration with a 5-meter armored cable and Harting plug. The series operating temperature specification is -20°C to +200°C, and its listed protection rating is IP65. These characteristics support use in demanding industrial installations when the complete sensor, connector, cable routing, and mounting conditions remain within their respective limits.
For maintenance and procurement, confirm the exact nameplate code and compare the existing installation’s mechanical interface, orientation, connector wiring, and monitor configuration before ordering a replacement. Sharing the PR9268 family designation does not guarantee that two variants are interchangeable.
Applications & System Role
The PR9268/601-000 is intended for absolute vibration measurement on industrial machinery. Typical application categories for the PR9268 family include:
- Steam, gas, and hydro turbines
- Industrial compressors
- Pumps and fans
- Bearing housings and machinery casings
- Machinery monitoring and protection installations
The sensor measures housing vibration velocity rather than the relative displacement between a rotating shaft and a stationary probe. Selection should therefore follow the measurement objective and the monitoring system’s sensor requirements.
FAQ
Q1: What type of sensor is the EPRO PR9268/601-000?
It is an electrodynamic velocity sensor used to measure absolute vibration on machinery housings and bearing supports.
Q2: Is the PR9268/601-000 designed for high-temperature applications?
Yes. The manufacturer specifies an operating temperature range of -20°C to +200°C for the PR9268/60x-000 series. Confirm the applicable limits for the complete installed assembly.
Q3: What cable and connector does this model use?
The ordering code identifies a 5-meter armored cable with a Harting plug.
Q4: What is the sensor’s frequency range?
The manufacturer specifies a frequency range of 10–1000 Hz for the PR9268/60x-000 and /70x-000 variants.
Q5: Does the sensor require an external power supply?
The PR9268 series specification identifies the sensor as self-powered. Confirm the receiving monitor’s input and loading requirements before connection.
Q6: Can the PR9268/601-000 replace another PR9268 model?
Not automatically. Verify sensor orientation, temperature rating, sensitivity, connector, cable configuration, mounting interface, and monitoring-system requirements before substitution.
Q7: What should be checked before commissioning?
Check mechanical mounting security, cable condition, connector pinout, monitor channel scaling, and the resulting vibration signal. Compare the signal with the approved commissioning baseline before returning the monitored machine to service.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626