Description
Core Product Summary
The Eurotherm T2550L80F32ELINSERIAL is an order-code configuration of the Eurotherm T2550 PAC, a programmable automation controller for machine control and process automation. It performs continuous analog control, logic control, sequential control, alarm monitoring, and secure data recording at the point of measurement.
As part of the T2550 PAC platform, this controller supports Modbus TCP, serial Modbus RTU in master or slave operation, Profibus slave communication, and OPC. It provides a 10/100 Mbps Ethernet/FTP interface and can operate standalone or as part of a wider control system with SCADA software, PLCs, and Eurotherm Visual Supervisor. The T2550 PAC uses IEC 61131 programming and supports controller redundancy, redundant communications, redundant system power supplies, and hot-swappable I/O modules.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Eurotherm |
| Exact order code | T2550L80F32ELINSERIAL |
| Product family | T2550 PAC |
| Product type | Programmable automation controller (PAC) |
| Control functions | Continuous analog, logic, and sequential control |
| Data functions | Data logging, batch management, recipes, alarm monitoring |
| Supported input signal types | mA, mV, potentiometer, RTD, thermocouple, volts |
| Ethernet/FTP | 10/100 Mbps |
| Serial Modbus | Master/slave |
| Profibus | Slave |
| Other communications | Modbus TCP, OPC |
| Network addressing | BOOTP, DHCP, fixed IP, link-local |
| Setpoint programmer | 8 channels, 32 segments each |
| Analog I/O capacity | 64 inputs / 32 outputs |
| Digital I/O capacity | 128 inputs / 128 outputs |
| Ingress protection | IP20 |
| Programming standard | IEC 61131 |
Engineering Selection Highlights
- The T2550L80F32ELINSERIAL belongs to the Eurotherm T2550 PAC family, so it should be selected where a programmable automation controller is required for combined control, recording, and communication functions.
- Its support for mA, mV, potentiometer, RTD, thermocouple, and voltage signal types makes it suitable for systems that combine process measurements with control outputs.
- Ethernet/FTP at 10/100 Mbps and serial Modbus RTU master/slave operation provide separate paths for supervisory integration and field-device communication.
- Modbus TCP, serial Modbus RTU, Profibus slave, and OPC support allow integration with SCADA packages, PLCs, and Eurotherm Visual Supervisor.
- The T2550 PAC platform supports controller redundancy, redundant communications, and redundant system power supplies; these functions require the appropriate system configuration and companion hardware.
- The IP20 enclosure rating means the controller is intended for installation within a suitable control enclosure rather than direct exposure to the process environment.
- IEC 61131 programming support should be matched to the engineering tool and application program used for commissioning and maintenance.

T2550L80F32ELINSERIAL

T2550L80F32ELINSERIAL
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Controller family | Eurotherm T2550 PAC | Confirm the complete order code against the required controller configuration. |
| Ethernet network | 10/100 Mbps Ethernet/FTP | Suitable for integration with Ethernet-based supervisory and data systems. |
| Serial field communications | Serial Modbus RTU, master or slave | Use for connection to compatible Modbus RTU devices. |
| Fieldbus | Profibus slave | The controller operates as a Profibus slave; confirm the master configuration before integration. |
| Supervisory integration | Modbus TCP, OPC, Eurotherm Visual Supervisor | Supports connection to compatible SCADA, PLC, and Eurotherm software environments. |
| Programming | IEC 61131 | Application development and configuration use IEC 61131-based programming. |
| I/O architecture | T2550 PAC I/O system | I/O modules are hot-swappable within the supported T2550 PAC system. |
| Redundancy | Controller, communications, and system power supply redundancy | Requires the corresponding redundant system configuration. |
Dimensions, Mounting & Connection Notes
The T2550 PAC has an IP20 ingress-protection rating and is intended for cabinet or enclosure installation. The T2550 PAC platform uses a modular I/O architecture with hot-swappable I/O modules; exact controller dimensions, weight, terminal assignments, wiring rules, clearances, and torque values should be taken from the installation documentation for the specific hardware configuration.
Detailed Product Overview
The Eurotherm T2550L80F32ELINSERIAL is a configured version of the Eurotherm T2550 programmable automation controller. The T2550 PAC combines control execution, secure data recording, alarm monitoring, signal conditioning, and industrial communications in a single automation platform. Its architecture is intended for applications where process control and recorded process data need to remain closely linked at the point of measurement.
The controller supports continuous analog control, logic control, and sequential control. This allows a single T2550 PAC application to handle regulatory control loops, interlocks, machine sequences, batch management, and recipe-based operation. The platform also provides an eight-channel setpoint programmer with 32 segments per channel, which is relevant for applications that require programmed setpoint profiles.
For system integration, the T2550L80F32ELINSERIAL supports 10/100 Mbps Ethernet/FTP, Modbus TCP, serial Modbus RTU master/slave communication, Profibus slave operation, and OPC. This combination allows the controller to exchange data with SCADA systems, PLCs, and Eurotherm Visual Supervisor while also communicating with compatible serial field devices. Network addressing can be configured using BOOTP, DHCP, a fixed IP address, or link-local addressing.
The T2550 PAC platform is designed around a modular I/O system. I/O modules are hot-swappable, which supports maintenance and configuration changes within the supported system architecture. The platform also provides options for controller redundancy, redundant communications, redundant data recording, and redundant system power supplies. These capabilities depend on the complete system design and the corresponding redundant hardware configuration.
The controller is programmed using IEC 61131. For procurement and engineering planning, the order code should be checked against the required I/O capacity, communications configuration, redundancy arrangement, enclosure installation conditions, and software or engineering-tool requirements.
Applications & System Role
In an automation architecture, the Eurotherm T2550L80F32ELINSERIAL functions as the control and recording node of a T2550 PAC system. It reads field signals, executes configured analog, logic, and sequential control programs, manages alarms, records process data, and communicates with supervisory or field-level systems.
Its supported signal types and communication options make it applicable to process-control systems that require temperature, voltage, current, resistance-temperature-detector, or potentiometer inputs alongside Ethernet and serial integration. The controller can serve as a standalone PAC or as part of a larger distributed control and recording environment.
FAQ
What is the Eurotherm T2550L80F32ELINSERIAL?
It is an order-code configuration of the Eurotherm T2550 PAC, a programmable automation controller for process and machine control applications.
Which product family does it belong to?
It belongs to the Eurotherm T2550 PAC family of programmable automation controllers.
What control functions does the T2550 PAC provide?
It provides continuous analog control, logic control, sequential control, alarm monitoring, signal conditioning, data logging, batch management, and recipe functions.
Which communication protocols are supported?
The T2550 PAC supports Modbus TCP, serial Modbus RTU as master or slave, Profibus slave communication, and OPC.
What Ethernet capability does the controller provide?
It provides a 10/100 Mbps Ethernet/FTP interface.
Which field signal types can the T2550 PAC accept?
Supported input types include mA, mV, potentiometer, RTD, thermocouple, and voltage signals.
Does it support redundant operation?
The T2550 PAC platform supports controller redundancy, redundant communications, redundant data recording, and redundant system power supplies when the appropriate system configuration is used.
What ingress-protection rating applies?
The T2550 PAC is rated IP20 and is intended for installation in a suitable enclosure.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626