Description
Core Product Summary
The Extreme Networks X440-G2-24x-10GE4 is a managed Layer 2/3 edge switch in the ExtremeSwitching X440-G2 series. It provides 24 unpopulated 1000BASE-X SFP ports, four 10/100/1000BASE-T combo ports, and four rear-panel SFP+ ports that operate at 1 GbE or can be licensed for 10 GbE operation.
The switch runs ExtremeXOS and includes a fixed internal AC power supply, a rear redundant power supply connector, an out-of-band management port, an RJ45 serial console port, and a USB 2.0 port. Two of the rear SFP+ ports can be converted to SummitStack-V stacking ports, enabling stacking with compatible Extreme Networks switches.
Key Technical Specifications
| Category | Specification |
|---|---|
| Product type | Managed Layer 2/3 edge switch |
| Series | ExtremeSwitching X440-G2 |
| Part number | 16538 |
| Software | ExtremeXOS Edge license |
| Front-panel ports | 24 × unpopulated 1000BASE-X SFP |
| Combo ports | 4 × 10/100/1000BASE-T RJ45 / 1000BASE-X SFP combo |
| Rear-panel uplinks | 4 × unpopulated 1GBASE-X SFP / 10GBASE-X SFP+ |
| 10 GbE operation | Requires an appropriate 10GbE upgrade license |
| Stacking | Two rear SFP+ ports can be converted to SummitStack-V stacking ports |
| Switching capacity | 128 Gbps |
| Forwarding rate | 95 Mpps |
| Packet buffer | 1.5 MB |
| Processor | 64-bit single-core MIPS processor, 1 GHz |
| Memory | 1 GB ECC DDR3 DRAM |
| Storage | 4 GB eMMC flash |
| MAC address table | 16,000 entries |
| Management | RJ45 serial console, 10/100/1000BASE-T out-of-band management port, USB 2.0 |
| Power supply | 1 fixed internal AC power supply |
| Power input | 100–240 VAC, 0.8 A maximum, 50/60 Hz |
| Redundant power | 1 rear 2×7 RPS connector |
| Dimensions | 4.4 cm H × 44.1 cm W × 25.4 cm D |
| Weight | 3.73 kg unpackaged |
| Operating temperature | 0 to 50°C |
| Storage temperature | −40 to 70°C |
| Operating humidity | 10% to 95%, non-condensing |
| Acoustic noise | 26.8 dB(A); 4.0 bels |
Engineering Selection Highlights
- The X440-G2-24x-10GE4 is fiber-oriented at the access layer: its 24 primary ports are unpopulated 1GbE SFP bays rather than fixed copper ports.
- Four 10/100/1000BASE-T combo ports provide local copper connectivity while retaining SFP flexibility on the same port positions.
- The four rear SFP+ ports support 1 GbE operation and can be upgraded to 10 GbE through an appropriate Extreme Networks license.
- Two rear SFP+ ports can be configured as SummitStack-V stacking ports, leaving a documented option of two uplink ports plus two stacking ports.
- The switch includes one fixed AC power supply and one rear RPS connector, so redundant power requires an appropriate external redundant power supply.
- ExtremeXOS Edge software is included with the switch configuration.
- The 1U, 19-inch form factor and 3.73 kg unpackaged weight support standard rack installation.

X440-G2-24x-10GE4

X440-G2-24x-10GE4
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Switch family | ExtremeSwitching X440-G2 | The model is a member of the X440-G2 edge-switch series. |
| Network operating system | ExtremeXOS | The switch ships with the ExtremeXOS Edge license configuration. |
| SFP ports | 24 front-panel 1000BASE-X SFP bays | SFP transceivers are not populated and must be selected for the intended fiber or copper media. |
| Combo ports | 4 × RJ45 / SFP combo ports | Each combo position provides either a copper RJ45 connection or an SFP connection. |
| Rear uplinks | 4 × SFP/SFP+ bays | Operate as 1 GbE by default; 10 GbE requires the applicable license. |
| 10 GbE licensing | Dual, Quad, or Dual-to-Quad 10GbE upgrade licenses apply to non-stacking ports | Port assignments 25–26 and 25–28 are documented for this model. |
| Stacking | SummitStack-V using two rear SFP+ ports | Enables two 1 GbE ports plus two stack ports, or two 10 GbE ports plus two stack ports. |
| Power redundancy | Rear 2×7 RPS connector | Requires a compatible Extreme Networks redundant power supply for redundant-power operation. |
| USB | 1 × USB 2.0 port | Operational on switches running ExtremeXOS version 22.2 or later. |
Dimensions, Mounting & Connection Notes
| Item | Verified data |
|---|---|
| Form factor | 1U rack-mountable |
| Height | 4.4 cm (1.73 in.) |
| Width | 44.1 cm (17.38 in.) |
| Depth | 25.4 cm (10.01 in.) |
| Unpackaged weight | 3.73 kg (8.22 lb.) |
| Packaged weight | 5.31 kg (11.57 lb.) |
| Power input | 100–240 VAC, 0.8 A maximum, 50/60 Hz |
| Power supply | 1 fixed internal AC power supply |
| Redundant power interface | 1 × rear 2×7 RPS connector |
| Console connection | RJ45 serial console port with RTS/CTS modem control |
| Management connection | 10/100/1000BASE-T out-of-band management port |
| USB connection | 1 × USB 2.0 front-panel port |
| Operating temperature | 0 to 50°C |
| Storage temperature | −40 to 70°C |
| Operating humidity | 10% to 95%, non-condensing |
Detailed Product Overview
The Extreme Networks -24x-10GE4 is a 1U managed edge switch designed for fiber-dense Gigabit Ethernet access. Its main port group consists of 24 unpopulated 1000BASE-X SFP bays, allowing the installed optics to determine whether each port serves multimode fiber, single-mode fiber, or another supported SFP media type.
Four front-panel 10/100/1000BASE-T combo ports add copper connectivity flexibility. Each combo position supports either an RJ45 copper connection or an SFP connection, allowing the same physical port group to accommodate different access requirements without adding a separate module.
At the rear, the switch provides four unpopulated SFP/SFP+ ports. These operate as 1 GbE ports in the base configuration and can be upgraded to 10 GbE operation with an appropriate Extreme Networks 10GbE upgrade license. The documented licensing options include dual-port, quad-port, and dual-to-quad upgrade paths. Two of the rear ports can alternatively be enabled as SummitStack-V stacking ports, producing either two 1 GbE ports plus two stack ports or two 10 GbE ports plus two stack ports.
The hardware platform uses a 1 GHz single-core 64-bit MIPS processor, 1 GB ECC DDR3 DRAM, 4 GB eMMC flash storage, and a 1.5 MB packet buffer. The switch provides 128 Gbps switching capacity and a 95 Mpps forwarding rate, with a 16,000-entry MAC address table.
Management access includes an RJ45 serial console port, a 10/100/1000BASE-T out-of-band management port, and one USB 2.0 port. The USB port is operational when the switch runs ExtremeXOS version 22.2 or later. The switch runs ExtremeXOS and is supplied with the ExtremeXOS Edge license configuration.
Power is provided by one fixed internal AC power supply accepting 100–240 VAC at up to 0.8 A. A rear 2×7 RPS connector supports connection to a compatible redundant power supply. The switch operates from 0 to 50°C, accepts 10% to 95% non-condensing relative humidity, and has a fixed fan design.
Applications & System Role
The X440-G2-24x-10GE4 functions as a campus or enterprise edge switch for fiber-based Gigabit Ethernet access. Its 24 SFP bays are suited to connecting downstream switches, wireless access points, IP cameras, or other network endpoints through fiber or copper SFP transceivers.
The four combo ports provide flexible copper or fiber connectivity for local devices, while the rear SFP+ ports provide uplink capacity to distribution or core layers. With the appropriate license, those rear ports can operate at 10 GbE, and two can instead be configured for SummitStack-V stacking.
The switch is positioned for networks that require managed Layer 2/3 edge functionality, fiber access density, uplink flexibility, and optional stacking without committing all rear ports to uplinks.
FAQ
What is the Extreme X440-G2-24x-10GE4?
The Extreme X440-G2-24x-10GE4 is a managed Layer 2/3 edge switch in the ExtremeSwitching X440-G2 series, with 24 1GbE SFP ports, four combo ports, and four rear SFP/SFP+ uplink ports.
How many ports does the X440-G2-24x-10GE4 have?
It has 24 unpopulated 1000BASE-X SFP ports, four 10/100/1000BASE-T / 1000BASE-X combo ports, and four rear-panel SFP/SFP+ ports.
Can the rear ports operate at 10 GbE?
Yes. The four rear SFP/SFP+ ports can be upgraded to 10 GbE operation using an appropriate Extreme Networks 10GbE upgrade license.
Does the switch support stacking?
Yes. Two rear SFP+ ports can be converted to SummitStack-V stacking ports using the enable stacking-support command.
What software does the X440-G2-24x-10GE4 use?
The switch uses ExtremeXOS and is supplied with the ExtremeXOS Edge license configuration.
What power configuration does the switch include?
It includes one fixed internal AC power supply and one rear 2×7 redundant power supply connector.
What are the switch dimensions and weight?
The unpackaged switch measures 4.4 cm high, 44.1 cm wide, and 25.4 cm deep, and weighs 3.73 kg.
What environmental conditions are supported?
The switch operates from 0 to 50°C and 10% to 95% non-condensing relative humidity. Its storage temperature range is −40 to 70°C.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626