WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Key Technical Specifications
| Parameter | Specification / Value |
| Part Number | P0917TE |
| Input Channels | 32 discrete input channels |
| Channel Grouping | 4 isolated groups of 8 channels each |
| Input Type | Voltage-free contact sensing or 24 V DC discrete signals |
| Filter Time | Configurable contact bounce filtering (1 ms to 255 ms) |
| Group Isolation | Galvanic isolation (1,000 V AC for 1 minute between groups and logic) |
| Power Dissipation | 3.0 W maximum at nominal 24 V DC operating conditions |
| Communication Interface | Redundant 2 Mbps Module Fieldbus (Path A and Path B) |
| Environmental Rating | Class G3 harsh environment compliant (ISA Standard S71.04) |
| Operating Temperature | −20 to +70 °C (−4 to +158 °F) |
| Relative Humidity | 5 to 95% non-condensing |
Product Introduction & Supply Chain Strategy
This product is a Brand New Surplus unit. It is not used, not pulled from a decommissioned plant, and not refurbished. All modules undergo rigorous quality verification to ensure OEM-level reliability. The Foxboro FBM217 (P0917TE) provides 32 high-density discrete input channels organized into four isolated groups, interfacing field devices such as limit switches, relay contacts, and pushbuttons directly with the Field Control Processor (FCP).
Holding FBM217 modules in New Surplus inventory serves as an essential strategic buffer against unplanned downtime in large-scale batch and continuous operations. Sourcing genuine, unused parts prevents the severe operational risks linked to second-hand components—such as contact bounce misreads, logic glitches, and degraded group optical isolation transformers—ensuring optimal Total Cost of Ownership (TCO).
- FBM217
- FBM217
Installation & Configuration Guide
Stage 1: Pre-Installation (Prep & Safety)
- Execute complete Lock-out/Tag-out (LOTO) procedures on all 24 V DC field contact sense power supplies.
- Put on a grounded ESD wrist strap before removing the replacement card from its anti-static bag.
- Photograph the existing termination assembly (TA) wiring and baseplate slot position for physical reference.
Stage 2: Removal
- Loosen the upper and lower captive module retention screws on the FBM217 faceplate.
- Disengage the release latches to unseat the module from the baseplate connectors.
- Slide the card out of its slot horizontally to prevent bending the backplane pins.
Stage 3: Installation (Clone & Seat)
- Verify the replacement part number reads P0917TE and inspect backplane connectors for debris.
- Align the module card with the baseplate guide rails.
- Push the module inward until connectors touch, then press firmly until fully seated. Tighten retention screws to 0.5 Nm.
Stage 4: Power-On & Testing
- Restore 24 V DC field sense power and verify line voltage stays between 21.6 V DC and 26.4 V DC.
- Observe status LEDs: confirm POWER lights solid green and FAIL remains unlit.
- Toggle field test contacts and confirm input status updates accurately across all 32 channels inside Foxboro Control Software.
Firmware/Software Versions & Upgrade Notes
- Recommended Version: Supported on Foxboro I/A Series System Software V8.x and Control Core Services / EcoStruxure Foxboro DCS V9.0 or later.
- Baseplate Compatibility: Compatible with standard 200 Series 2-position, 4-position, or 8-position Foxboro baseplates (P0926HF, P0926KE series).
- Upgrade Warnings:
- Ensure baseplate address switches are configured correctly prior to applying live power; incorrect addresses prevent Field Control Processor communication.
- Do not assign mixed voltage levels across channels within the same 8-channel group to prevent internal isolation damage.
Frequently Asked Questions (FAQ)
Why is this New Surplus FBM217 module priced lower than OEM factory list price?
We source unused surplus inventory directly from canceled capital projects, system integrator reserves, and corporate spare stocks globally. This allows us to supply genuine OEM hardware at a fraction of list price without manufacturing delay.
Is this module completely unused or refurbished?
This is strictly New Surplus / Original New stock. It has never seen process service, features zero backplane pin wear, and comes in original protective anti-static packaging. We maintain a strict zero-tolerance policy against refurbished or repaired parts.
Can I hot-swap the while the DCS baseplate is powered?
Yes, the supports live hot-swapping on powered baseplates. Once inserted, the active Field Control Processor automatically recognizes the card address and downloads channel configuration parameters directly.
What is the advantage of 32 channels organized in 4 isolated groups?
Group isolation allows four distinct 8-channel field wiring zones to share a single module slot while maintaining electrical isolation between groups, minimizing required baseplate real estate without sacrificing signal safety.
What warranty coverage is provided with this New Surplus module?
Every (P0917TE) module includes a full 1-year replacement warranty, supported by visual contact checks, voltage isolation tests, and power-on diagnostic verification prior to shipment.
