Sale!

Foxboro K0143AAAN I/A Series Processor Control Board

  • Model: K0143AAAN
  • Brand: Foxboro / Invensys
  • Series: I/A Series
  • Core Function: Executes system-specific control or processing functions
  • Product Type: Processor PCB assembly
  • Board Reference: ASM 03-187742U01 Rev. B, supplier-reported
  • System Compatibility: Foxboro I/A Series; exact host assembly requires verification
  • Key Specs: Configuration-sensitive PCB; stored ROM; exact I/O and communications function unverified
  • ⚠️ Obsolete Model: Limited stock available
  • Condition: Confirm New Original, New Surplus, Used Tested, or Refurbished status
Categories: , , , , SKU: K0143AAAN Brand:

Description

Key Technical Specifications

  • Manufacturer: Foxboro / Invensys, now within Schneider Electric
  • Part Number: K0143AAAN
  • Product Family: Foxboro I/A Series
  • Product Type: Processor or control PCB assembly
  • Board Assembly Reference: ASM 03-187742U01
  • Known Board Revision: Rev. B, supplier-reported
  • Memory: ROM fitted; capacity and device type not independently verified
  • Primary Function: System-specific processing or control function
  • Input Channels: Not independently verified
  • Output Channels: Not independently verified
  • Communication Interfaces: Not independently verified
  • Supply Voltage: Not independently verified
  • Backplane Interface: Verify from the host Foxboro assembly
  • Terminal Interface: Not independently verified
  • Configuration Data: May be board- or system-specific; verify before replacement
  • Operating Temperature: Not independently verified
  • Dimensions: Not independently verified
  • Weight: Not independently verified
  • Lifecycle: Discontinued / obsolete according to secondary inventory records
  • Replacement Rule: Match part number, board assembly number, revision, ROM, and host-system compatibility

Public listings conflict on the function of K0143AAAN, describing it variously as a power module, digital I/O module, fieldbus communications module, and processor PCB. The strongest board-level identification links it to ASM 03-187742U01 Rev. B with ROM. Treat the exact function and electrical ratings as unverified until confirmed from the physical board and Foxboro documentation.

 

Product Introduction

The Foxboro K0143AAAN is a legacy I/A Series printed-circuit assembly associated with board reference ASM 03-187742U01 Rev. B. Available supplier records identify it most consistently as a configuration-sensitive processor or control PCB, although other listings assign incompatible functions. Confirm the actual board marking, host rack, and Foxboro system documentation before purchase.

This part should be sourced as an exact board-level replacement, not as a generic Foxboro input, power, or communications module. Revision, ROM contents, backplane connector, system role, and stored configuration can determine whether the replacement will operate in the existing I/A Series installation.

K0143AAAN

K0143AAAN

K0143AAAN

K0143AAAN

Troubleshooting Quick Reference

Symptom Possible Cause Relevance to This Part Quick Check Method Recommendation
Host system does not recognize the board Incorrect slot, wrong board type, backplane fault, or incompatible revision ✅ High Record the system diagnostic and compare the slot assignment with the Foxboro configuration Verify the complete K0143AAAN and ASM 03-187742U01 identification
Entire controller section is offline Rack power, controller, backplane, or processor fault ⚠️ Medium Measure rack supply rails and confirm whether adjacent cards remain online Check system power and backplane before replacing this PCB
Processor or system fault appears at startup ROM, processor, memory, configuration, or board failure ✅ High Record the exact diagnostic code and compare ROM and revision markings Use a replacement with matching board revision and memory configuration
Input or output points are inactive Field I/O, terminal board, I/O module, controller, or configuration fault ❌ Low to medium Test the field circuit and inspect the associated I/O card diagnostics Do not replace K0143AAAN solely because field points are inactive
Communications are unavailable Host interface, backplane, cabling, configuration, or wrong board function ⚠️ Medium Identify the actual board function from the system drawing and inspect communication diagnostics Confirm whether the installed board is a communications assembly before replacement
Board LEDs are dark Missing supply, poor seating, failed regulator, or defective PCB ✅ High Measure the board supply at the rack interface and inspect connector seating with power isolated Verify rack power and connector condition first
System runs intermittently Oxidized edge connector, vibration, thermal stress, cracked solder joint, or marginal power ⚠️ Medium Inspect contacts and trend rack supply voltage and cabinet temperature Correct environmental and power issues before replacement
New board creates an immediate mismatch Different ROM, revision, board identity, or host configuration ✅ High Compare labels, jumpers, ROM markings, revision, and slot configuration Stop commissioning and obtain a configuration-matched replacement
Calibration or control behavior changes Incorrect ROM or application data, wrong board variant, or system parameter mismatch ✅ High Compare stored configuration, board reference, and original replacement data Restore only verified configuration; do not assume plug-and-play operation
Fuse or supply protection trips Shorted board, incorrect power, damaged connector, or downstream fault ✅ High Isolate the board and test resistance only under an approved service procedure Do not repeatedly re-energize; identify the short before installation
Board shows corrosion or rework Poor storage, contamination, previous repair, or moisture damage ✅ High Inspect PCB coating, connectors, solder joints, ROM sockets, and labels Reject undocumented or visibly altered stock
Fault remains after replacement External system issue, wrong function, incorrect slot, or unverified seller identification ⚠️ Medium Compare the complete system bill of materials and diagnostic logs Confirm the part identity with photographs and board-level documentation

Critical warning: Do not install K0143AAAN based on a reseller description that calls it an input, power, or communications module. Public records conflict on its function. Verify the board label, ASM 03-187742U01 reference, revision, ROM configuration, connector layout, and host Foxboro slot before applying power.

For technical support, provide front and rear board photos, all labels and revision markings, ROM markings, rack slot, host controller model, diagnostic logs, supply measurements, and the original board’s configuration.

 

Frequently Asked Questions (FAQ)

 

What is the Foxboro ?

It is a legacy Foxboro I/A Series PCB assembly associated with ASM 03-187742U01 Rev. B. Supplier records most consistently describe it as a processor or control board, but public listings conflict enough that the exact installed function must be verified from the physical assembly and system drawings.

 

Is a digital input or fieldbus module?

That is not established reliably. Some reseller pages call it a digital input or fieldbus module, while board-level inventory identifies it as a processor PCB. Do not use those descriptions as interchangeable specifications. Verify the assembly number, connectors, and host-system slot.

 

Can I substitute with another Foxboro I/A Series board?

No. I/A Series boards can differ in processing function, memory, firmware or ROM, backplane interface, signal conditioning, and slot assignment. Match and the associated ASM number and revision before approving a substitute.

 

Is this part obsolete?

Yes. It is listed as discontinued or limited-stock equipment in secondary inventory channels. Available units may be new surplus, used, or refurbished. Request photos of the actual board and verify the revision, ROM contents, test scope, warranty, and return policy.

 

Does the board retain the control configuration?

The board’s ROM and system-specific memory configuration may be essential to its function. Do not assume a blank or differently configured replacement will retain the plant application. Back up the Foxboro system and document the original board before removal.

 

What condition should I specify when ordering?

Specify New Original, New Surplus, Used Tested, or Refurbished. For this part, also request the ASM 03-187742U01 board reference, revision, ROM markings, serial number, connector photos, and test report.

 

What should a supplier test before shipment?

Testing should include board identification, visual and connector inspection, ROM verification, power-up in a compatible Foxboro I/A Series rack, slot recognition, diagnostic review, processor or system function, and extended operation. The report should identify the tested serial number, host rack, board revision, ROM configuration, and applied test procedure.