WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
3. Key Technical Specifications
| Parameter | Specification Value |
| Manufacturer | GAI-Tronics / Hubbell |
| Part Number | 10959-201 |
| System Compatibility | GAI-Tronics Page/Party 700/1000 Series Indoor/Outdoor Stations |
| Operating Voltage | 24 VDC / 120 VAC (station chassis power supply dependent) |
| Audio Output Level | 12 W RMS speaker drive capability |
| Frequency Response | 250 Hz to 4,000 Hz (optimized for voice intelligibility) |
| Distortion | Less than 1% THD at rated output power |
| Line Impedance | 33 ohms line loading standard |
| Operating Temperature | −30°C to +70°C (−22°F to +158°F) |
| Enclosure Integration | Plug-in chassis card / station interior assembly |
| Diagnostics | Onboard status LEDs for power and line-busy verification |
4. Product Introduction & Supply Chain Strategy
The GAI-Tronics 10959-201 is an internal amplifier and audio line-control printed circuit board designed for GAI-Tronics Page/Party industrial communication stations. Operating inside heavy-duty plant enclosures across power plants, chemical facilities, and steel mills, it conditions microphone audio, drives high-decibel paging speakers, and manages multi-party private conversation lines across harsh industrial environments.
This product is a Brand New Surplus unit. It is not used, not pulled from a decommissioned plant, and not refurbished. All modules undergo rigorous quality verification to ensure OEM-level reliability. Stocking a New Surplus 10959-201 board on-site ensures immediate restoration of emergency public address and life-safety communication lines without waiting weeks for factory production runs. Refurbished communication boards frequently suffer from dried-out audio output capacitors, trace oxidation caused by chemical fumes, and worn mechanical relays that lead to distorted paging audio or failed call-line switching. Buying factory-fresh surplus guarantees clean audio reproduction, zero terminal pin wear, and full operational readiness.
10959-201
10959-201
5. Installation & Configuration Guide
1.Pre-Installation Preparation & Safety:De-energize station power feed and follow safety LOTO.
Disconnect and Lockout/Tagout (LOTO) the incoming 120 VAC or 24 VDC power lines supplying the GAI-Tronics station enclosure. Put on an ESD-grounded wrist strap before opening the weatherproof station housing to protect sensitive audio ICs from static discharge.
2.Legacy Component Removal:Unplug field harnesses and extract legacy board.
Document and photograph all wire terminations and harness connections. Disconnect the microphone input, speaker output, page line, and party line terminal plugs from the existing 10959-201 board. Remove the chassis mounting hardware and carefully lift the old board out of the enclosure.
3.Mechanical Installation & Jumper Matching:Mount new module and mirror jumper configurations.
Verify that all onboard option jumpers and audio gain trim pots on the new 10959-201 match the configuration of the original board. Align the board with the station mounting standoffs, secure with original fasteners, and re-attach all pre-wired terminal harness connectors.
4.Power-On & Audio Tuning:Energize station power and perform voice test.
Restore supply power to the station. Perform a test page call to verify clear speaker output volume without feedback or clipping. Test the party-line switch positions to confirm private conversation channel isolation.
6. Firmware/Software Versions & Upgrade Notes
- Hardware Architecture: The 10959-201 is an analog communication control card; it requires no software downloads, IP configurations, or firmware flashes.
- Station Compatibility: Confirm that the 10959-201 model suffix matches your specific GAI-Tronics station enclosure series (indoor wall-mount vs. hazardous-area weatherproof cast-aluminum enclosures).
- Gain Adjustment: Set the microphone sensitivity and speaker output volume trim potentiometers using a plastic alignment tool during initial power-up to match ambient plant background noise levels.
7. Frequently Asked Questions (FAQ)
Q: Is this GAI-Tronics 10959-201 card Brand New Surplus or refurbished? A: This board is 100% Brand New Surplus stock. It has never seen field installation in an industrial facility, exhibits zero pin or edge connector wear, and is preserved in anti-static protective packaging.
Q: Why choose New Surplus over a refurbished GAI-Tronics amplifier card? A: Industrial communications are crucial for plant safety and emergency evacuations. Refurbished audio boards often contain degraded electrolytic capacitors and thermal-stressed power amplifier ICs that produce low volume, garbled voice paging, or complete channel failure under high ambient temperatures. Buying New Surplus ensures original audio fidelity and full system reliability.
Q: Does replacing the 10959-201 require taking the entire plant paging loop offline? A: No. GAI-Tronics Page/Party systems feature parallel line distribution. You can isolate and service an individual station’s internal 10959-201 board without interrupting communication across the rest of the facility’s paging network.
Q: What causes low audio volume or distortion after installing a new card? A: Audio distortion or low volume is typically caused by incorrect speaker tap matching or misadjusted potentiometer gain settings. Adjust the onboard speaker output trim pot clockwise to increase gain, ensuring output levels match ambient plant noise without causing acoustic feedback.
Q: What warranty coverage applies to this New Surplus GAI-Tronics card? A: This GAI-Tronics 10959-201 board includes a full 1-year replacement warranty covering hardware defects and functional performance.
