Sale!
IS200WETBH1BBA
IS200WETBH1BBA
IS200WETBH1BBA

GE IS200WETBH1BBA Mark VIe Wind WETB Board

  • Model: IS200WETBH1BBA
  • Brand: GE (General Electric)
  • Series: Mark VIe Wind Turbine Control
  • Core Function: Top Box B terminal board assembly
  • Product Type: Turbine Control PCB / Terminal Assembly
  • Key Specs: WETB architecture, conformal-coated PCB, Mark VIe Wind compatibility
  • Application: Wind turbine control cabinet signal interface
  • Condition: New Original / New Surplus
  • Status: ⚠️ Obsolete Model – Limited Stock Available
Get a Quote
Categories: , , , , SKU: IS200WETBH1BBA Brand:

Description

3. Key Technical Specifications

  • Manufacturer: GE Energy
  • Model Number: IS200WETBH1BBA
  • Functional Acronym: WETB
  • Functional Description: WETB Top Box B Board Assembly
  • Series Compatibility: GE Mark VIe Wind Turbine Control System
  • Board Type: PCB terminal assembly
  • Hardware Revision: H1BBA
  • PCB Protection: Conformal coating
  • Application: Wind turbine control panel integration
  • Mounting: GE Mark VIe modular control cabinet assembly
  • Dimensions: Approx. 260 mm × 200 mm × 60 mm (reported)
  • Weight: Approx. 2 kg (reported)
  • Operating Environment: Industrial turbine control enclosure
  • Manufacturer Origin: GE Energy production line

 

4. Product Introduction

The GE IS200WETBH1BBA is a WETB Top Box B Board Assembly designed for GE Mark VIe Wind turbine control systems. It functions as a turbine cabinet interface PCB, supporting signal routing and terminal assembly functions within the wind control architecture. The board uses conformal coating for PCB protection in turbine operating environments.

This module is typically maintained as a spare for legacy GE Mark VIe Wind installations. Before replacement, verify the exact Top Box configuration, hardware revision, connector layout, and system documentation to avoid field wiring or compatibility issues.

IS200WETBH1BBA
IS200WETBH1BBA
IS200WETBH1BBA
IS200WETBH1BBA

 

5. Installation & Configuration Guide

Stage 1: Pre-Installation Preparation (Estimated Time: 10 minutes)

⚠️ Safety First

  1. Notify operations before removing the WETB assembly.
  2. Place the wind turbine controller into a safe maintenance condition.
  3. Apply lockout/tagout procedures.
  4. Remove cabinet power.
  5. Wait at least 5 minutes for stored energy discharge.

Tools Required

  • ESD wrist strap
  • PH1 screwdriver
  • Digital multimeter
  • Wire labels
  • Smartphone/camera for documentation

Data Backup

  1. Record the existing board location.
  2. Photograph:
    • Board label
    • Cable routing
    • Terminal connections
    • Connector positions
  3. Save controller configuration if accessible.
  4. Document existing alarm status.

Stage 2: Removing the Old Module (Estimated Time: 5 minutes)

  1. Remove cabinet access panels.
  2. Label all connected cables.
  3. Disconnect terminal wiring carefully.
  4. Remove mounting hardware.
  5. Pull the board assembly straight out.
  6. Inspect connectors for:
    • Bent pins
    • Dust
    • Moisture contamination
    • Mechanical damage

⚠️ Keep the removed board until the replacement is verified operational. It is the best reference for wiring and revision comparison.

Stage 3: Installing the New Module (Estimated Time: 10 minutes)

  1. Wear ESD protection.
  2. Confirm replacement marking:
    • IS200WETBH1BBA
    • WETB Top Box B Assembly
  3. Compare the new board with the removed unit.
  4. Install into the correct Mark VIe Wind cabinet position.
  5. Secure mounting hardware.
  6. Reconnect all field connectors.

Installation Checklist

  • Correct board revision
  • Terminal wiring matches original
  • Connectors fully seated
  • Mechanical mounting secured

⚠️ Configuration Warning: Similar GE IS200 boards can look physically close but have different functions. Always verify the exact part number before installation.

Stage 4: Power-On & Testing (Estimated Time: 15 minutes)

  1. Verify cabinet power supply voltage.
  2. Energize the control cabinet.
  3. Check controller diagnostics.
  4. Confirm WETB board communication/status.
  5. Verify connected field signals.
  6. Perform operational test sequence.

⚠️ Troubleshooting Notes

  • No board response: check seating and connector engagement.
  • Signal errors: verify terminal wiring against drawings.
  • Repeated faults: confirm the installed board revision matches the original system configuration.

 

6. Frequently Asked Questions (FAQ)

Q1: Can the GE IS200WETBH1BBA be hot-swapped?
A: No. Treat this as a powered-down turbine control replacement unless GE documentation for the exact cabinet confirms live replacement capability. Removing control PCBs under power can damage connectors and electronics.

Q2: Is IS200WETBH1BBA obsolete?
A: It is part of the legacy GE Mark VIe Wind platform, so availability is generally through industrial spare-part channels, surplus inventory, or tested refurbished stock.

Q3: What system uses this WETB board?
A: The IS200WETBH1BBA is associated with GE Mark VIe Wind Turbine Control systems and WETB Top Box B assemblies.

Q4: Is this a controller CPU board?
A: No. The WETB is a board assembly used within the turbine control cabinet architecture. It is not a replacement for a main controller processor module.

Q5: Will replacing this board erase turbine software?
A: The turbine application software is normally maintained in the controller system, not this terminal assembly. However, always document the existing configuration before removal.

Q6: Why is this part cheaper than current OEM pricing?
A: Legacy automation hardware is often supplied from surplus or maintenance inventory. The important checks are traceability, inspection records, and physical condition.

Q7: What should be checked before buying?
A: Confirm:

  • Exact part number: IS200WETBH1BBA
  • Revision code
  • Mark VIe Wind compatibility
  • Board condition
  • Test documentation if refurbished

A correct part number match prevents most replacement problems in legacy GE turbine systems.

Related products