Sale!

GE IS420UCSBH4A Mark VIe UCSB Controller Module

Parameter Verified information
Manufacturer General Electric (GE)
Exact model IS420UCSBH4A
Functional designation UCSB
Product type Standalone controller module
System family GE Mark VIe / Mark VIeS
Supported applications Mark VIe, EX2100e, and LS2100e
Processor 1066 MHz Intel EP80579
Memory 256 MB DDR2 SDRAM with ECC
Storage 2 GB NAND flash
Operating system QNX Neutrino real-time operating system
Categories: , , , , Brand:

Description

Core Product Summary

The GE IS420UCSBH4A is a UCSB controller module for GE Mark VIe and Mark VIeS control systems. It is a standalone controller that runs application code and communicates with distributed I/O packs over the dedicated IONet Ethernet network.

The controller uses a 1066 MHz Intel EP80579 processor, 256 MB of ECC DDR2 SDRAM, and 2 GB of NAND flash storage. It operates from a nominal 28 VDC supply and provides Ethernet interfaces for IONet and UDH/CDH communications. The IS420UCSBH4A is designed for Mark VIe, EX2100e, and LS2100e applications and is configured with GE ControlST software.

 

Key Technical Specifications

Parameter Verified information
Manufacturer General Electric (GE)
Exact model IS420UCSBH4A
Functional designation UCSB
Product type Standalone controller module
System family GE Mark VIe / Mark VIeS
Supported applications Mark VIe, EX2100e, and LS2100e
Processor 1066 MHz Intel EP80579
Memory 256 MB DDR2 SDRAM with ECC
Storage 2 GB NAND flash
Operating system QNX Neutrino real-time operating system
Ethernet interfaces Five Ethernet ports: two for control-network/UDH/CDH use and three for IONet
Network interface IONet Ethernet to distributed I/O packs
Power input 27.4 to 28.6 VDC; 28 VDC nominal
Maximum input current 1.1 A
Power consumption 17.3 W nominal; 28.7 W peak
Mounting Panel-mounted controller module
Cooling Fanless, convection-cooled design
Battery No battery required
Configuration No jumper settings required
Programming environment GE ControlST / ToolboxST
Reference documentation GEH-6721, Mark VIe and Mark VIeS Control Systems Guide

 

Engineering Selection Highlights

  • Mark VIe controller role: The IS420UCSBH4A is a UCSB standalone controller, so it is selected where the Mark VIe architecture requires a controller that executes application code and communicates with distributed I/O packs.
  • IONet-based I/O architecture: The controller uses three IONet Ethernet interfaces to communicate with distributed I/O packs, making IONet connectivity a central integration requirement.
  • UDH/CDH Ethernet connectivity: Two additional Ethernet interfaces support control-network/UDH/CDH communications, separating I/O-network traffic from control-network communications.
  • Processing and memory capacity: Its 1066 MHz Intel EP80579 processor, 256 MB ECC DDR2 SDRAM, and 2 GB NAND flash define the controller’s processing and storage capacity.
  • 28 VDC power requirement: The controller operates from a 27.4 to 28.6 VDC supply, with 17.3 W nominal and 28.7 W peak power consumption.
  • Panel-mounted form factor: The controller is a panel-mounted module that mounts directly to panel sheet metal, with no battery or jumper settings required.
  • ControlST software dependency: The controller is programmed and configured using GE ControlST software, with ToolboxST as the associated engineering tool.
 IS420UCSBH4A

IS420UCSBH4A

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Control platform GE Mark VIe / Mark VIeS The IS420UCSBH4A is a UCSB controller for the Mark VIe platform.
Supported applications Mark VIe, EX2100e, and LS2100e The controller is used across these GE control-system applications.
I/O interface IONet Ethernet The controller communicates with distributed I/O packs over IONet.
Ethernet interfaces Five RJ45 Ethernet ports Three IONet ports and two control-network/UDH/CDH ports.
Power supply 27.4 to 28.6 VDC; 28 VDC nominal The controller requires a 28 VDC-class supply.
Mounting Panel-mounted controller module The module mounts directly to panel sheet metal.
Programming software GE ControlST / ToolboxST Required for controller configuration and application development.
Reference documentation GEH-6721, Mark VIe and Mark VIeS Control Systems Guide Provides the applicable controller reference information.

 

Dimensions, Mounting & Connection Notes

The IS420UCSBH4A is a panel-mounted controller module that mounts directly to panel sheet metal. It is a fanless, convection-cooled module with no battery and no jumper settings required.

The controller provides five RJ45 Ethernet ports: three for IONet and two for control-network/UDH/CDH communications. Power is supplied through a 28 VDC micro-mini Mate-N-Lok input connector. The controller weighs approximately 2.4 lb (1 kg).

 

Detailed Product Overview

The GE IS420UCSBH4A is a UCSB controller module for GE’s Mark VIe and Mark VIeS control systems. It is a standalone controller that runs application code and communicates with distributed I/O packs over the dedicated IONet Ethernet network.

The controller uses a 1066 MHz Intel EP80579 processor, 256 MB of ECC DDR2 SDRAM, and 2 GB of NAND flash storage. It runs the QNX Neutrino real-time operating system, which provides the real-time execution environment for the controller’s application logic.

The IS420UCSBH4A provides five Ethernet interfaces. Three are dedicated to IONet, the network used for communication with distributed I/O packs. The remaining two support control-network/UDH/CDH communications. This separation of IONet and control-network traffic defines the controller’s communication architecture.

The controller operates from a 27.4 to 28.6 VDC supply, with 28 VDC as the nominal input voltage. Its power consumption is 17.3 W nominal and 28.7 W peak. The module is fanless and convection-cooled, with no battery and no jumper settings required.

The IS420UCSBH4A is a panel-mounted controller module that mounts directly to panel sheet metal. It weighs approximately 2.4 lb (1 kg). Its physical form factor and mounting method are defined by the Mark VIe control-system architecture.

The controller is used in Mark VIe, EX2100e, and LS2100e applications. Its function is to execute application code and manage communication with distributed I/O packs over the IONet network. The controller does not host direct application I/O; instead, I/O is handled by the distributed I/O packs connected through IONet.

Programming and configuration are performed using GE ControlST software, with ToolboxST as the associated engineering tool. The controller’s reference documentation is GEH-6721, the Mark VIe and Mark VIeS Control Systems Guide.

 

Applications & System Role

Within a GE Mark VIe control architecture, the IS420UCSBH4A functions as the standalone controller that runs application code and communicates with distributed I/O packs over the IONet network. Its role is to execute the control logic and manage the data exchange between the controller and the connected I/O packs.

The controller is used in Mark VIe, EX2100e, and LS2100e applications. Its IONet-based architecture means that field I/O is handled by distributed I/O packs rather than by the controller itself, with the controller providing the processing and communication layer for the control system.

 

FAQ

What is the GE IS420UCSBH4A?
It is a GE Mark VIe UCSB standalone controller module that runs application code and communicates with distributed I/O packs over the IONet Ethernet network.

Which GE system family does the IS420UCSBH4A belong to?
It belongs to the GE Mark VIe / Mark VIeS control-system family.

What applications is the IS420UCSBH4A used for?
It is used in Mark VIe, EX2100e, and LS2100e applications.

What processor does the IS420UCSBH4A use?
It uses a 1066 MHz Intel EP80579 processor.

How much memory and storage does it provide?
It provides 256 MB of ECC DDR2 SDRAM and 2 GB of NAND flash storage.

How many Ethernet ports does the controller have?
It provides five RJ45 Ethernet ports: three for IONet and two for control-network/UDH/CDH communications.

What power supply does the IS420UCSBH4A require?
It operates from a 27.4 to 28.6 VDC supply, with 28 VDC nominal.

What software is used to program the IS420UCSBH4A?
It is programmed and configured using GE ControlST software, with ToolboxST as the associated engineering tool.