WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Key Technical Specifications
| Parameter | Value |
|---|---|
| Memory Capacity | 128 Mbyte SDRAM |
| Serial Bit Rate | 2.12 Gbaud |
| Transfer Rate | 43 to 170 Mbyte/s |
| Packet Size | 4 to 64 bytes dynamic |
| Nodes Supported | Up to 256 |
| Fiber Distance | Multimode 300 m max; single-mode 10 km |
| Latency | 450-500 ns between nodes |
| Interface | PCIe low profile (x4 lanes 2.5 GT/s) |
| Power | 1.6 A max +3.3 VDC; 0.6 A max +12 VDC |
| Operating Temp | 0 °C to +65 °C |
| MTBF | 607,680 hours |
Product Introduction
The GE PCIE-5565PIORC-100000 is a low-profile PCIe Reflective Memory node card from the 5565 series. It handles deterministic real-time data sharing over fiber-optic networks in control systems, simulations, and test setups. Drops into standard PCIe slots on industrial PCs or servers.
This PIO-mode card pushes 170 Mbyte/s sustained with 128 MB SDRAM for buffering. Writes echo across the ring without host CPU load, scaling to 256 nodes. Teams use it where standard networks lag, like synchronized motion control or radar sims. Match PCIe lane speed to host specs.
- PCIE-5565PIORC-100000
Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| No PWR LED | PCIe slot power fail | ❌ Low | Measure +3.3 V / +12 V at edge fingers with Fluke 87 | Reseat in another slot; test host PSU |
| LINK LED off | Fiber or TX/RX fault | ✅ High | Clean LC connectors; check 850 nm multimode continuity <2 dB loss | Swap fiber; verify wavelength match |
| ACT LED absent | Node ID dupes or ring break | ✅ High | Check onboard switches for unique ID 1-256; monitor driver stats | Reset ID; isolate single-node test |
| Data errors | Packet overrun or noise | ✅ Medium | Query software counters for lost/bad packets | Drop packet size; enable redundancy |
| No interrupts | PCIe IRQ conflict | ❌ Low | Scan dmesg/VxWorks logs for assignment; test API interrupt call | Reboot host; update PCIe drivers |
| Latency spikes | FIFO full or excess nodes | ✅ High | Log transfer rates; cap at 170 Mbyte/s max observed | Trim node count; use smaller packets |
Snap photos of LEDs and logs if stuck. These cards rarely flake—blame the net first. Ping support with details.
Frequently Asked Questions (FAQ)
Hot-swappable in PCIe?
No way. PCIe power cycle required. Live insert corrupts data or zaps the card. Shut down clean.
-100000 vs -200000 difference?
-100000 packs 128 MB SDRAM; -200000 doubles to 256 MB. Same PIO speed, fiber setup. Pick based on buffer needs.
Why surplus pricing?
Pulled from OEM overstock, factory sealed. Full QC skips middleman costs. Identical to new, full warranty.
Config holds on reboot?
Switches lock node ID permanently. SDRAM wipes—volatile, reload app data each boot.
Host OS and slot fit?
Linux, VxWorks, Windows XP+. Low-profile x4 PCIe gen1 slot. No risers needed.
Firmware updates?
Field upgradable via Abaco/GE tools. We log version on test sheet—ask for it
Stock and warranty details?
Ships 1-2 days from stock. 1-year RTB warranty post-test. Serial-specific videos available.
Quality Control SOP
Trace GE PCIE-5565PIORC-100000 via serial to OEM docs and declarations. Scan holograms, verify no tampered seals or chip fade. Full visual—no dents on PCIe fingers or fiber ports.
Slot into test PCIe server running VxWorks. Boot ring: PWR/LINK/ACT sequence check, 24-hour load at 170 Mbyte/s with temp probes on SDRAM. API pings 4-node sim, I/O loops via C sample code. 500 V Megger (>10 MΩ isolation), ground <1 Ω. Fluke 289 captures ripple
Dump firmware version, photo switches. Inspector stamps, ESD bag, foam-packed box with silica. QC label includes date. Report and photos ship standard; video on request.
Technical Pitfalls & Survival Guide
❗ Node ID Conflicts
Dupes drop the whole ring silent. Snapped more than one install that way. Photo old switches, match exactly. 1-256 unique, no exceptions.
❗ PCIe Lane Mismatch
Gen2/3 hosts throttle to 2.5 GT/s—fine, but IRQ storms if x8 slot. Test in x4 first. Seen PCIe storms lock hosts
❗ Fiber Type Mixup
850 nm multimode only for 300 m—single-mode blinds it. LC ports: clean religiously, loss <2 dB. Wrong cable = no LINK forever.
❗ Power Spike on Insert
1.6 A inrush at +3.3 V taxes weak PSUs. Calculate slot budget, 20% spare. Bitten by undersized servers mid-test.
❗ ESD on Bench
PCIe gold fingers fry easy. Dry air static popped an FPGA once—poof. Wrist strap to chassis ground, always.
Nail these, and swaps take 10 minutes flat. Save the downtime.
