Sale!

GE PEDL1000-57941101 | 690 V 1000 A Liquid-Cooled IGBT Inverter Module

Item Value
Manufacturer GE Power Conversion
Part number PEDL1000-57941101
Product type Liquid-cooled IGBT transistor-bridge / Delta inverter module
System family MV3000 / MV DELTA liquid-cooled drive system
Nominal rating 690 VAC, 1000 A
Semiconductor type IGBT
Nominal supply voltage 690 VAC rms
Long-term supply-voltage tolerance ±10%
Categories: , , , , Brand:

Description

Core Product Summary

The GE PEDL1000-57941101 is a liquid-cooled, IGBT-based Delta transistor-bridge module rated 690 VAC and 1000 A nominal. It is a GE Power Conversion building block for high-power inverter systems and is designed for use with the PECe controller in MV3000 drive applications.

This exact variant includes an integral cooling fan for the DC capacitors and a conformally coated DIBe board. It also uses Staubli RMI16 quick-release water connectors for its liquid-cooling circuit. The module requires system-level integration with a PECe Mains Voltage Monitor Unit for voltage feedback and a PIBe firing-pulse interface; operating limits such as heatsink warning and trip temperatures are configured in the PECe control code.

 

Key Technical Specifications

Item Value
Manufacturer GE Power Conversion
Part number PEDL1000-57941101
Product type Liquid-cooled IGBT transistor-bridge / Delta inverter module
System family MV3000 / MV DELTA liquid-cooled drive system
Nominal rating 690 VAC, 1000 A
Semiconductor type IGBT
Nominal supply voltage 690 VAC rms
Long-term supply-voltage tolerance ±10%
Short-term supply-voltage tolerance ±15% for 0.5 to 30 cycles, with loss of performance but no trip
Supply frequency range 45 to 63 Hz
Output frequency range 0 to 200 Hz
Maximum continuous DC operating voltage 1170 VDC
Maximum DC surge voltage 1275 VDC
Maximum DC-link capacitor-bank voltage 1315 VDC
Maximum silicon voltage, VCES 1700 VDC
Current rating at 1.1 × overload 1000 A
Current rating at 1.5 × overload 733 A
Instantaneous overcurrent trip level 2500 A
DC-link capacitance 16,800 µF
Default output switching frequencies 1.25, 2.5, and 5 kHz
Output overload current 50% or 10% for one minute, once every 10 minutes, as selected
Losses at 1.1 × current rating 7,687 W
Losses at 1.5 × current rating 5,114 W
Coolant flow rate 25 L/min (6.6 US gal/min)
Maximum coolant inlet temperature 60 °C
Maximum working pressure 3 bar (0.3 MPa)
Ambient operating temperature 0 to 50 °C
Relative humidity 5 to 95%, non-condensing
Normal operating altitude Up to 1000 m
Ingress protection IP00 (NEMA 1)
Dimensions 247 × 559 × 1263 mm (W × D × H)
Weight 98 kg
Cooling connectors Staubli RMI16 quick-release water connectors
Variant-specific features Integral DC-capacitor cooling fan; conformally coated DIBe board

 

Engineering Selection Highlights

  • The PEDL1000-57941101 is rated 690 VAC and 1000 A nominal, so it is intended for high-power inverter applications rather than low-voltage general-purpose drive service.
  • It is an IGBT-based liquid-cooled Delta module, making coolant flow, coolant compatibility, inlet temperature, pressure, and drainage arrangements essential selection and installation considerations.
  • The module is designed for PECe control; the system designer must configure certain Delta operating limits in the PECe control code rather than relying on settings stored solely in a CDC controller.
  • The exact variant includes a conformally coated DIBe board and an integral fan for the DC capacitors, distinguishing it from the PEDL1000-47941001 variant, which has no integral fan.
  • Staubli RMI16 quick-release water connectors support the module’s liquid-cooling connection and should be matched to the installed cooling-system arrangement.
  • The module requires a PECe Mains Voltage Monitor Unit for system voltage feedback and a PIBe for the firing-pulse interface; these dependencies must be included in the drive-system design.
  • Its IP00 enclosure rating means the module must be installed in an appropriate enclosure with restricted access; it is not suitable for unprotected installation.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Controller PECe controller The PEDL1000 is designed for PECe-controlled inverter systems.
Voltage feedback PECe Mains Voltage Monitor Unit The Delta is normally used with this unit for system voltage feedback.
Firing-pulse interface PIBe A PIBe provides the firing-pulse interface for the module.
Drive system GE MV3000 / MV DELTA liquid-cooled drive system The module is a building block for high-power inverters within this architecture.
Control connection 40-way ribbon connector PL1 to/from the MV3000e controller This connection carries the low-voltage control interface.
SMPS connection 40-way ribbon connector PL3 from the SMPS The SMPS supplies the module’s low-voltage control connection.
DC high-voltage control connection 2-way connector TB1 for SMPS and voltage monitoring Use the specified connector arrangement for these functions.
Cooling Liquid cooling with Staubli RMI16 quick-release connectors The cooling circuit must meet the specified flow, temperature, pressure, and coolant-compatibility requirements.
Mounting Liquid-cooled DELTA mounting frame The module slides between a lower guide plate and an upper cross member.
Network type TN or TT; IT network only when isolated from the public mains supply by an isolating transformer Network configuration affects insulation-category requirements.
Voltage unbalance Negative-sequence voltage must not exceed 3% Confirm supply quality before integration.
External protection For full UL 508C compliance, transient suppressors complying with UL 1449 must be fitted external to the drive This requirement applies when UL 508C compliance is required.

 

Dimensions, Mounting & Connection Notes

The GE PEDL1000-57941101 measures 247 mm wide, 559 mm deep including the SMPS, and 1263 mm high. Its weight is 98 kg.

The module is designed to slide into a liquid-cooled DELTA mounting frame between a lower guide plate and an upper cross member. Because it is IP00 rated, it must always be installed in an appropriate enclosure with restricted access.

AC power connections use three M10 studs per phase, with a design cable arrangement of 3 × 95 mm² per phase and a maximum of 3 × 120 mm² per phase. DC power connections use three M10 studs per phase, with a design arrangement of 3 × 120 mm² per phase and a maximum of 3 × 150 mm² per phase. The earth connection uses one M10 bolt. AC and DC power connections are based on high-temperature cable, such as Von Roll Isola silicon-rubber type SIWO-KUL or an equivalent cable.

The cooling circuit requires 25 L/min of coolant flow, a maximum coolant inlet temperature of 60 °C, and a maximum working pressure of 3 bar. The recommended coolant is an ethylene glycol/water mix, provided it is compatible with the module materials and includes suitable corrosion and freeze-protection inhibitors where applicable.

 

Detailed Product Overview

The GE PEDL1000-57941101 is a variant of the PEDL1000 liquid-cooled transistor-bridge module. It is based on the MVDL1000 Delta module concept but is fitted with a DIBe2 interface unit and is intended for use with GE Power Conversion’s PECe control platform.

As a 690 VAC, 1000 A IGBT-based Delta module, it provides the switching stage for high-power inverter systems. Its nominal supply voltage is 690 VAC rms, with a long-term tolerance of ±10%. It can tolerate ±15% supply-voltage variation for 0.5 to 30 cycles, although performance is reduced during that condition and the module does not trip. The supply-frequency range is 45 to 63 Hz, while the output-frequency range is 0 to 200 Hz.

The module’s DC-side limits are important for system design. The maximum continuous operating voltage is 1170 VDC, the maximum DC surge voltage is 1275 VDC, and the maximum DC-link capacitor-bank voltage is 1315 VDC. The maximum silicon voltage is 1700 VDC. Where an SMPS over-voltage trip is fitted, its limit must be respected. The DC-link capacitance is 16,800 µF, arranged as 12 parallel paths of three series-connected 4200 µF capacitors.

The PEDL1000-57941101 differs from related PEDL1000 variants through its conformally coated DIBe board and integral cooling fan for the DC capacitors. It also uses Staubli RMI16 quick-release water connectors. These features affect both environmental suitability and the physical interface required by the cooling system.

Liquid cooling is integral to the module’s operation. The specified coolant flow is 25 L/min, with a maximum inlet temperature of 60 °C and a maximum working pressure of 3 bar. The recommended coolant is an ethylene glycol/water mix, subject to compatibility with the materials used in the product and the inclusion of appropriate corrosion and freeze-protection inhibitors.

The module is designed for installation in a liquid-cooled DELTA mounting frame. It slides between a lower guide plate and an upper cross member. Its IP00 rating means that the surrounding enclosure must provide appropriate protection and restricted access. The module’s operating environment is 0 to 50 °C ambient air temperature, 5 to 95% non-condensing relative humidity, and normal operation up to 1000 m altitude. Between 1000 m and 2000 m, derating is 7.3% per 1000 m.

Control integration requires a PECe Mains Voltage Monitor Unit for system voltage feedback and a PIBe for the firing-pulse interface. The module connects to the MV3000e controller through a 40-way ribbon connector and receives its low-voltage control connection from the SMPS through another 40-way ribbon connector. The DIBe2 interface unit also provides the connection path for these control and monitoring functions.

PEDL1000-57941101

PEDL1000-57941101

PEDL1000-57941101

PEDL1000-57941101

Applications & System Role

The PEDL1000-57941101 functions as a power-conversion building block in a GE high-power inverter system. Within an MV3000 or MV DELTA liquid-cooled drive architecture, it performs the power-electronic switching function of a Delta module while the PECe controller provides system control.

The module’s IGBT bridge, DC-link capacitors, cooling arrangement, and DIBe2 interface unit work together as part of the inverter power stage. Its operating limits are partly implemented through the PECe control code, so correct integration depends on both the hardware configuration and the drive-system software setup.

This module is suited to GE Power Conversion inverter systems that require a 690 VAC, 1000 A liquid-cooled Delta power stage. Its use should be planned around the required MV3000 drive configuration, PECe control architecture, cooling-system capacity, and the appropriate line reactor, DC-link inductor, inter-bridge transformer, or output-sharing reactor arrangement for the application.

 

FAQ

at is GE ?
GE PEDL1000-57941101 is a liquid-cooled, IGBT-based Delta transistor-bridge module rated 690 VAC and 1000 A nominal for GE Power Conversion high-power inverter systems.

Which driveuses the ?
It is used as a building block in GE MV3000 and MV DELTA liquid-cooled drive systems.

What controller is required for the PEDL1000-57941101?
The module is designed for use with a PECe controller.

What are the module’s nominal electrical ratings?
The nominal ratings are 690 VAC and 1000 A. The module supports a 1.1 × overload current rating of 1000 A or a 1.5 × overload current rating of 733 A.

What cooling arrangement does the PEDL1000-57941101 require?
It requires liquid cooling with a flow rate of 25 L/min, a maximum coolant inlet temperature of 60 °C, and a maximum working pressure of 3 bar.

What distinguishes the 57941101 variant?
This variant has a conformally coated DIBe board and an integral cooling fan for the DC capacitors. It also uses Staubli RMI16 quick-release water connectors.

What auxiliary components does the module require?
The PEDL1000 is normally used with a PECe Mains Voltage Monitor Unit for voltage feedback and a PIBe for the firing-pulse interface.

What is the module’s ingress-protection rating?
The module is IP00 rated and must always be installed in an appropriate enclosure with restricted access.