Description
Core Product Summary
The GE VMIPCI-5565-110000 is a PCI-form-factor Reflective Memory interface card from the GE Fanuc/VMIC 5565 Reflective Memory family. It provides a fiber-optic shared-memory network that allows data written at one node to be reproduced at the same address on the other nodes in the network.
This exact configuration includes 128 MB of onboard SDRAM reflective memory, 4K FIFOs, and a multimode fiber-optic interface. The card uses a 2.12 Gbaud serial fiber link, supports up to 256 nodes, and provides hardware-based data distribution without requiring processor involvement in routine network transfers.
Key Technical Specifications
| Parameter | GE VMIPCI-5565-110000 |
|---|---|
| Manufacturer | GE Fanuc / VMIC |
| Product family | 5565 Reflective Memory |
| Product type | PCI Reflective Memory interface card |
| Model configuration | VMIPCI-5565-110000 |
| Reflective memory | 128 MB onboard SDRAM with parity |
| FIFO memory | 4K FIFOs |
| Fiber interface | Multimode fiber |
| Serial link rate | 2.12 Gbaud |
| Network size | Up to 256 nodes |
| Dynamic packet size | 4 to 64 bytes |
| Network transfer rate | 47.1 MB/s with 4-byte packets to 174 MB/s with 64-byte packets |
| Redundant transfer rate | 23.5 MB/s with 4-byte packets to 87 MB/s with 64-byte packets |
| PCI interface | 64-bit, 66 MHz; PCI Local Bus Specification Revision 2.2 compliant |
| PCI transfer rate | 264 MB/s on a 33 MHz/64-bit bus or 528 MB/s on a 66 MHz/64-bit bus |
| DMA | Two independent DMA channels |
| Interrupts | Network interrupt generation to another node or all nodes |
| Fiber distance, multimode | Up to 300 m |
| Operating temperature | 0 to +65°C with forced-air cooling |
| Storage temperature | -40 to +85°C |
| Relative humidity | 20% to 80%, noncondensing |
| Power requirement | +3.3 VDC ±5%, 1.5 A maximum |
| Software support | VMISFT-RFM2g network and shared-memory driver |
Engineering Selection Highlights
- The
110000ordering code identifies 128 MB of SDRAM reflective memory, 4K FIFOs, and multimode fiber transmission. - The PCI interface supports 64-bit, 66 MHz transfers, so the host computer must provide a compatible PCI slot and bus configuration to obtain the documented PCI transfer capability.
- The multimode fiber configuration supports link distances up to 300 m; single-mode fiber versions are separate configurations and should not be assumed to have the same reach.
- The card supports up to 256 nodes on one Reflective Memory network, making network size and node addressing relevant during system design.
- Data written to reflective memory at one node is transferred by network hardware to the same address on other nodes, allowing applications to share data through ordinary memory reads and writes.
- Two DMA channels reduce host-processor involvement for suitable data-transfer operations.
- The card requires forced-air cooling and is specified for 0 to +65°C exit-air operating temperature, so enclosure airflow and adjacent-board heat load affect its thermal margin.

VMIPCI-5565-110000

VMIPCI-5565-110000
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Host bus | PCI Local Bus Specification Revision 2.2 | The card is a PCI-form-factor reflective-memory node. |
| PCI transfer capability | 64-bit, 66 MHz PCI transfers | A 32-bit or 33 MHz host bus limits the available PCI-side transfer rate. |
| Reflective Memory network | 5565 Reflective Memory family | The card can operate in a network with compatible PCI, VME, and PMC members of the family. |
| Fiber medium | Multimode fiber | This exact configuration uses multimode fiber and supports distances up to 300 m. |
| Network scale | Up to 256 nodes | Each board in the network is a node. |
| Software | VMISFT-RFM2g network and shared-memory driver | The supplied driver supports network and shared-memory operation. |
| Operating systems | Windows NT, Windows 2000, VxWorks, and Linux | Software support should be matched to the host platform and application environment. |
| Cooling | Forced-air cooling required | The 0 to +65°C rating is expressed as an exit-air operating condition. |
Dimensions, Mounting & Connection Notes
- The VMIPCI-5565-110000 is a PCI add-in card intended for installation in a compatible PCI slot.
- It provides a multimode fiber-optic network connection.
- The card includes status indication through onboard LEDs for link status, activity, and error conditions.
- It requires forced-air cooling in the host enclosure.
- The documented power requirement is +3.3 VDC ±5% at a maximum of 1.5 A.
- The exact mechanical envelope and connector pinout should be taken from the VMIPCI-5565 hardware documentation for the installed hardware revision.
Detailed Product Overview
The GE VMIPCI-5565-110000 is the PCI member of the GE Fanuc/VMIC 5565 Reflective Memory family. It creates a high-speed fiber-optic shared-memory network in which each node maintains an up-to-date local copy of the network’s shared memory. Data written into reflective memory on one node is automatically transferred over the fiber link and written to the same address on the other participating nodes.
This exact model configuration provides 128 MB of onboard SDRAM reflective memory with parity, 4K FIFOs, and multimode fiber transmission. The fiber link operates at 2.12 Gbaud and uses dynamic packet sizes from 4 to 64 bytes. Depending on packet size, the documented non-redundant network transfer rate ranges from 47.1 MB/s to 174 MB/s; when redundant transfer is enabled, the documented rate ranges from 23.5 MB/s to 87 MB/s.
The card connects to the host through a PCI interface compliant with PCI Local Bus Specification Revision 2.2. It supports 64-bit, 66 MHz PCI transfers, with documented PCI-side transfer rates of 264 MB/s on a 33 MHz/64-bit bus and 528 MB/s on a 66 MHz/64-bit bus. The interface throttles back to the available fiber-link rate as its FIFOs begin to fill, so actual end-to-end throughput depends on both the host bus and the reflective-memory network condition.
Two independent DMA channels are provided for suitable data-transfer operations. The card also supports network interrupts: a node can generate an interrupt to another selected node or to all nodes on the network. These features allow event-driven coordination in addition to continuous shared-memory data exchange.
The 5565 family includes PCI, VME, and PMC form factors. Compatible members can be combined on the same Reflective Memory network, allowing systems with different buses, operating systems, or no operating system to exchange data through the same shared-memory model. The VMIPCI-5565-110000 is specifically a multimode-fiber configuration, with a documented fiber reach of up to 300 m.
Operation requires forced-air cooling. GE specifies an operating range of 0 to +65°C exit air, storage from -40 to +85°C, and 20% to 80% relative humidity, noncondensing. The card requires +3.3 VDC ±5% at up to 1.5 A. The VMISFT-RFM2g network and shared-memory driver supports operation under Windows NT, Windows 2000, VxWorks, and Linux.
Applications & System Role
The VMIPCI-5565-110000 acts as a real-time shared-memory node in a distributed computing or control architecture. It connects a PCI-based host to a fiber-optic Reflective Memory network, where each participating node maintains a local copy of the shared memory set.
When an application writes data to the card’s reflective memory, the network hardware transfers that data to the corresponding address on the other nodes. This provides a common data image across computers, workstations, PLCs, and embedded controllers without requiring the host processor to manage each network transaction.
The card is suited to distributed systems that need coordinated data exchange across multiple hosts, including real-time control, simulation, test, and data-acquisition architectures. Its suitability for a particular application depends on the required network topology, fiber distance, number of nodes, host PCI capability, and software environment.
FAQ
the GE ?
It is a GE Fanuc/VMIC PCI Reflective Memory interface card with 128 MB SDRAM, 4K FIFOs, and multimode fiber-optic networking.
How much reflective memory does it provide?
It provides 128 MB of onboard SDRAM reflective memory with parity.
What fiber type does the 110000 configuration use?
It uses multimode fiber and supports a fiber distance of up to 300 m.
How many nodes can it support?
It supports up to 256 nodes on a Reflective Memory network.
What is the fiber link speed?
The serial fiber link operates at 2.12 Gbaud.
Does it support DMA?
Yes. It includes two independent DMA channels.
Which PCI bus capability does it support?
It supports 64-bit, 66 MHz PCI transfers and complies with PCI Local Bus Specification Revision 2.2.
What operating temperature applies?
The documented operating range is 0 to +65°C exit air with forced-air cooling.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626