Description
Core Product Summary
The GE VMIVME-5565 is a 6U VMEbus reflective memory node card that provides ultrahigh-speed, deterministic shared-memory networking over fiber optics. Data written to local memory on one node is automatically replicated to the corresponding memory locations on all other nodes in the network.
It supports up to 256 nodes with a 2.12 Gbaud serial fiber-optic link, dynamic packet sizes from 4 to 64 bytes, and sustained transfer rates from 43 MB/s to 174 MB/s. Onboard reflective memory is available in 64 MB or 128 MB SDRAM configurations. The board operates without host processor involvement in network traffic and includes network interrupt capability.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Product type | Ultrahigh-Speed Fiber-Optic Reflective Memory with Interrupts |
| Form factor | 6U VME single slot |
| Bus interface | VMEbus A24/A32, D08/D16/D32 |
| Serial link rate | 2.12 Gbaud |
| Network transfer rate | 43 MB/s (4-byte packets) to 174 MB/s (64-byte packets) |
| Maximum nodes | 256 |
| Onboard memory | 64 MB or 128 MB SDRAM Reflective Memory |
| Fiber options | Multimode (up to 300 m) or single-mode (up to 10 km) |
| Packet size | Dynamic, 4 to 64 bytes |
| Interrupts | Four general-purpose network interrupts with 32-bit data |
| Latency | Typically 450–500 ns between nodes |
| DMA | VMEbus DMA support |
| Error handling | Error detection; optional redundant transfer mode |
Detailed Product Overview
The GE VMIVME-5565 belongs to the 5565 family of reflective memory products and implements a high-speed, low-latency shared-memory network over fiber optics. When a processor writes data into the onboard reflective memory, the board automatically broadcasts that data across the fiber-optic network so that every other node receives and stores an identical copy at the same address offset. Reads are performed locally from the onboard SDRAM, delivering fast access times with no network traffic.
The network operates at 2.12 Gbaud and supports dynamic packet sizing from 4 to 64 bytes. Sustained throughput ranges from 43 MB/s for small packets to 174 MB/s for 64-byte bursts. Up to 256 nodes can participate in a single network. Multimode fiber supports distances up to 300 m; single-mode fiber extends reach to 10 km. The board requires no host processor involvement for normal data movement—transmit and receive FIFOs buffer peak traffic to maintain high throughput.
Four general-purpose network interrupts allow any node to interrupt one or more remote nodes, each carrying 32 bits of user data. These interrupts are commonly used for process synchronization or to signal the arrival of critical data. The board also supports VMEbus DMA for efficient bulk transfers between local system memory and the reflective memory space.
Error detection is performed on the fiber link, and an optional redundant transfer mode is available for applications requiring additional protection against lost packets. The VMIVME-5565 is software-compatible with other members of the 5565 family (PMC and PCI form factors), enabling mixed-bus reflective memory networks.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Form factor | 6U VME | Single-slot installation |
| Bus | VMEbus A24/A32, D08/D16/D32 | Slave interface with DMA support |
| Network topology | Ring or star (via external hubs) | Up to 256 nodes |
| Fiber type | Multimode (LC) or single-mode (LC) | Multimode ≤ 300 m; single-mode ≤ 10 km |
| Memory options | 64 MB or 128 MB SDRAM | Selected at order time |
| Software | Reflective memory drivers available for common real-time operating systems | Network operation is transparent to application software |
| Companion products | Other 5565-family boards (PMC, PCI) | Mixed-form-factor networks supported |

VMIVME-5565

VMIVME-5565
Dimensions, Mounting & Connection Notes
- Form factor: Standard 6U VME Eurocard
- Mounting: Single VME slot
- Front-panel interface: LC fiber-optic transceiver (transmit and receive)
- Indicators: Front-panel status LEDs
- Power: Supplied from VME backplane
FAQ
What is the GE VMIVME-5565?
It is a 6U VMEbus reflective memory node card that provides high-speed, deterministic shared memory over a fiber-optic network.
How many nodes can be connected?
The network supports up to 256 nodes.
What transfer rates are achieved?
Sustained network rates range from 43 MB/s (4-byte packets) to 174 MB/s (64-byte packets).
What memory sizes are available?
The board can be configured with 64 MB or 128 MB of onboard SDRAM reflective memory.
What fiber distances are supported?
Multimode fiber supports up to 300 m; single-mode fiber supports up to 10 km.
Does the host processor participate in network data movement?
No. Once data is written to local reflective memory, the board handles network replication autonomously.
Can nodes interrupt each other?
Yes. Four general-purpose network interrupts are available, each carrying 32 bits of data, and can target individual nodes or all nodes.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626