WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Key Technical Specifications
| Parameter | Specification |
| Manufacturer | GECMA Components GmbH (Eaton / MTL Instruments) |
| Model / Part Number | 15i-2-FMO (Challenger Series) |
| Display Type | 15.0-inch TFT LCD Module |
| Resolution | 1024 x 768 pixels (XGA) |
| Ingress Protection | IP54 (Front Panel) / Flush Panel Mount |
| Hazardous Area Approvals | ATEX / IECEx certified for Zone 1, 2, 21, and 22 environments |
| Operating Temperature | 0°C to +60°C |
| Humidity Range | 10% to 90% RH (non-condensing) |
| Housing Construction | Industrial Polycarbonate & Anodized Metal Alloy Chassis |
| Input Power | AC line power (220–240 V AC, 50/60 Hz) or Low-Voltage DC variants |
Product Introduction & Supply Chain Strategy
The GECMA Challenger 15i-2-FMO is a ruggedized 15-inch remote PC terminal module manufactured by GECMA Components (an Eaton MTL brand). Built specifically for chemical, pharmaceutical, oil & gas, and manufacturing process environments, the Challenger series allows operators to monitor and interact with control room automation directly from hazardous process floors (ATEX Zone 1/2/21/22).
Due to the modular architecture of the Challenger platform, the display unit functions seamlessly with fiber-optic or copper transmission links to transfer video, keyboard, and mouse signals across long distances without signal degradation or ignition risks. Deploying verified OEM surplus or professionally refurbished 15i-2-FMO units ensures critical production lines maintain operational compliance without requiring full control panel redesigns when legacy display hardware fails.
15i-2-FMO
15i-2-FMO
Installation & Service Guide
1.Stage 1: Pre-Installation & Hazardous Area Safety:Safety Isolation & Area Check.
Verify that the installation area is either declared non-hazardous or that a valid hot-work permit has been issued. Disconnect all main power sources feeding the terminal enclosure and verify complete electrical de-energization using a calibrated meter.
2.Stage 2: Panel Mounting & Physical Sealing:Mechanical Mounting.
Clean the mounting cut-out on the control cabinet door or enclosure wall. Insert the 15i-2-FMO terminal housing through the cutout and secure it evenly around the perimeter using panel mounting clamps to preserve the IP54 dust/water seal integrity.
3.Stage 3: Electrical & Transmission Cable Termination:Wiring & Signal Connections.
Connect the main AC/DC power leads to the designated terminal block inside the unit’s connection bay. Terminate the optical transmission or data cable connections to the internal transmission card, taking care not to exceed minimum bend radii on fiber cables.
4.Stage 4: Commissioning & Functional Testing:System Power-Up & Verification.
Re-apply main power to the unit and observe the boot sequence. Verify image alignment, brightness levels, and signal lock with the host remote PC in the safe control room. Confirm touch or peripheral inputs respond accurately across the entire display screen.
Frequently Asked Questions (FAQ)
Q: What is the main application of the GECMA Challenger 15i-2-FMO?
A: It is designed as a remote PC terminal / display interface for operating host computer systems directly from hazardous processing plant environments where explosive gases, vapors, or dusts are present.
Q: Is the Challenger 15i-2-FMO suitable for outdoor installation?
A: The front panel carries an IP54 rating, making it splash-proof and dust-protected. For exposed outdoor applications, it should be installed inside an appropriately rated Ex-proof outer enclosure to protect against direct weather exposure and thermal buildup.
Q: Can this display unit be repaired or exchanged?
A: Yes. Given its modular design, internal power modules, display backlights, and data cards can be serviced, re-certified, or supplied via service-exchange programs through specialized industrial automation repair providers.
Q: How does the “FMO” suffix impact hardware configuration?
A: The suffix designates specific options regarding the internal transmission interface, casing finish, or integrated mounting bracket options tailored to the GECMA modular system ecosystem.
