Sale!

GUTOR 0P1417 | RFI Filter PCB for Battery Circuit ±480 V DC

The GUTOR 0P1417 is a loaded (fully populated) RFI filter printed circuit board used in GUTOR industrial power systems, including the PEW and PDW UPS families and SDC rectifier configurations. GUTOR is an industrial UPS brand within Schneider Electric, and 0P-series boards such as this one are documented spare parts in GUTOR system part lists.

Categories: , , , , SKU: 0P1417 Brand:

Description

Core Product Summary

The GUTOR 0P1417 is a loaded (fully populated) RFI filter printed circuit board used in GUTOR industrial power systems, including the PEW and PDW UPS families and SDC rectifier configurations. GUTOR is an industrial UPS brand within Schneider Electric, and 0P-series boards such as this one are documented spare parts in GUTOR system part lists.

The board carries the radio-interference filtering stage for the battery circuit at ±480 V DC, where it is assigned the EMC designator position in the system’s EMC filtering arrangement alongside separate RFI boards for the three-phase output and mains/bypass paths. Its role is to suppress conducted interference on the DC battery path while carrying the battery current within the cabinet’s EMC concept. For procurement and repair work, the board is identified by the part number 0P1417 together with its board assembly number 0021005-1, and it is specified per system rather than as a standalone catalog device.

 

Key Technical Specifications

Attribute Value
Brand / series GUTOR (Schneider Electric), 0P-series spare part boards
Part number 0P1417
Board assembly number 0021005-1
Product type Loaded printed circuit board, RFI (EMC) filter
Circuit function RFI filtering of the battery circuit
Circuit voltage class Battery +/- 480 V DC
System designator EMC_Z002 (EMC filtering section)
Related boards in the EMC section 0P9896 (RFI filter, 480 V 3-phase output), 0P9895 (RFI filter, mains/bypass or output, 480 V 3-phase)

 

Detailed Product Overview

In a GUTOR PEW or PDW three-phase UPS, interference suppression is organized as a dedicated EMC section inside the power cabinet. Each filter position in that section has its own populated board: one for the three-phase output, one for the mains/bypass or output path, and one for the battery circuit. The 0P1417 occupies the battery position, designated EMC_Z002 in system part lists, and filters the +/- 480 V DC battery conductors.

This division matters during fault isolation. If an EMC-related disturbance is traced to the DC side, the 0P1417 is the board in scope, while disturbance on the AC output or bypass side points to the 0P9896 or 0P9895 boards instead. The same board also appears in GUTOR SDC rectifier system part lists, where the battery RFI filter position is again assigned to 0P1417, indicating that the part is specified across more than one GUTOR system architecture rather than being tied to a single cubicle configuration.

Because the board sits in the battery path, it operates at the system’s DC voltage level rather than at control-electronics level. Work on it therefore falls under the battery and DC safety procedures of the host system, including isolation and discharge of DC capacitors before removal. When ordering a replacement, the 0P1417 number and the 0021005-1 assembly number should both be checked against the system’s own master part list, since GUTOR boards can exist in revisions and the correct revision is defined by the individual system number.

0P1417

0P1417

0P1417

0P1417

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Host system family GUTOR industrial UPS and DC power systems (PEW, PDW; SDC rectifier systems) Documented as a spare part in system part lists for these families
Circuit position Battery circuit, +/- 480 V DC, EMC designator EMC_Z002 Confirm the designator against the system’s own part list before ordering
Companion EMC boards 0P9896 (output RFI, 480 V 3-phase), 0P9895 (mains/bypass or output RFI, 480 V 3-phase) Separate boards; 0P1417 covers only the battery path
Correct revision Board assembly 0021005-1 Match the assembly number and revision to the system number’s master part list

 

Dimensions, Mounting & Connection Notes

Published dimensional and connection data for this board could not be sufficiently verified for the exact part number, so no installation figures are stated here. Verify board outline, mounting points, and conductor terminations against the system’s own schematic and master part list before replacement.

 

FAQ

What is the GUTOR 0P1417?
It is a fully populated RFI filter printed circuit board used as a spare part in GUTOR industrial UPS and DC power systems.

Which circuit does the 0P1417 filter?
It filters the battery circuit at +/- 480 V DC and carries the EMC section designator EMC_Z002 in system part lists.

Which GUTOR systems use this board?
It is listed as a spare part for GUTOR PEW and PDW UPS systems and for SDC rectifier system part lists.

What is the board assembly number for the 0P1417?
The board is identified as assembly 0021005-1; the revision in a given system is defined by that system’s master part list.

Does one board handle all EMC filtering in the cabinet?
No. The output path uses the 0P9896 board and the mains/bypass or output path uses the 0P9895 board, both for 480 V three-phase circuits; the 0P1417 covers only the battery path.

What should be checked before ordering a replacement?
Compare both the 0P1417 part number and the 0021005-1 assembly number, including revision, against the master part list of the specific system number.