Description
Core Product Summary
The GUTOR 0P1922A is a printed circuit controller board designated “PCB Controller Parallel Operating” in GUTOR system spare parts lists. GUTOR is an industrial UPS brand within Schneider Electric, and 0P-series boards such as this one are documented spares for the PEW and PDW three-phase UPS families.
The board belongs to the parallel-operation control group of the system, listed alongside the complete front panel and alarm items, and carries the position designator A024. In systems where two or more UPS units operate in parallel, this board provides the coordination function between the connected units; it is documented for configurations such as 2 x 150 kVA GUTOR UPS installations. The part exists in related variants, including the base 0P1922 board and the 0P1922AB assembly, so the exact suffix must be matched to the host system’s own part list before ordering.
Key Technical Specifications
| Attribute | Value |
|---|---|
| Brand / series | GUTOR (Schneider Electric), 0P-series spare part boards |
| Part number | 0P1922A |
| Base part number | 0P1922 |
| Related variant | 0P1922AB (parallel/PLL module, part code UNC1-0P-0017) |
| Product type | Printed circuit controller board |
| Documented description | PCB Controller Parallel Operating |
| System position designator | A024 |
| Spare-parts group | Display, controller parallel, alarm |
| Host system families | GUTOR PEW / PDW three-phase UPS systems |
Detailed Product Overview
Parallel UPS configurations place specific demands on the control electronics. When two or more GUTOR UPS units share a load, their inverters must be synchronized and load-shared continuously; the parallel operating controller is the board that carries this coordination logic. In GUTOR spare parts documentation, the 0P1922A is listed in the group “Display, Controller Parallel, Alarm” at position A024, next to the complete front panel, which places it among the system-level control boards rather than in the power stage.
Documented usage covers systems such as 2 x 150 kVA GUTOR UPS installations, where the board is specified as suitable for the parallel pair. This means the board is relevant for two scenarios: commissioning spares for a new parallel system, and corrective maintenance of an existing parallel installation where a control board fault has affected load sharing or synchronization between units.
The part number structure matters for procurement. The 0P1922A sits between the base 0P1922 board and the 0P1922AB variant, which is documented with the part code UNC1-0P-0017 as a parallel/PLL module. These suffixes indicate hardware revisions or configuration levels of the same functional board. Because a parallel controller must match the control scheme of the units it coordinates, the suffix fitted in a specific system should be taken from that system’s master part list, identified by its system serial number, rather than assumed from the family listing alone.

0P1922A

0P1922A
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Host system family | GUTOR PEW / PDW three-phase UPS systems | Listed as a spare part in GUTOR system spare parts documentation |
| Application | Parallel operation of two or more UPS units | Documented for configurations such as 2 x 150 kVA GUTOR UPS systems |
| System position | A024, in the “Display, Controller Parallel, Alarm” group | Confirm the position designator against the system’s own part list |
| Related part numbers | 0P1922 (base board), 0P1922AB (variant, part code UNC1-0P-0017) | Match the exact suffix to the system serial number’s master part list |
FAQ
What is the GUTOR 0P1922A?
It is a printed circuit controller board described as “PCB Controller Parallel Operating” in GUTOR system spare parts lists.
What does the 0P1922A do in a UPS system?
It provides the control function for parallel operation, coordinating UPS units that share a load in a parallel configuration.
Which GUTOR systems use the 0P1922A?
It is documented as a spare part for GUTOR PEW and PDW three-phase UPS systems, including parallel installations such as 2 x 150 kVA systems.
What is the position designator of the 0P1922A?
A024, within the spare-parts group “Display, Controller Parallel, Alarm”.
Are there related part numbers to the 0P1922A?
Yes. The base board is 0P1922, and the 0P1922AB is a documented variant associated with the parallel/PLL module part code UNC1-0P-0017.
How should the correct version be identified before ordering?
Check the suffix (0P1922, 0P1922A, or 0P1922AB) against the master part list of the specific system serial number, since the required board version is defined per system.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626