Description
Core Product Summary
The GUTOR 0P2406A is an interface fuse board for GUTOR UPS systems, documented in GUTOR spare parts lists as “Interface Fuse FC UPS, 110 V DC, w.o. T1…T12”. GUTOR is an industrial UPS brand within Schneider Electric, and 0P-series boards such as this one are catalogued spares for the PEW and PDW three-phase UPS families.
The board combines the fuse interface function for the 110 V DC circuit with fuse status monitoring positions T1 through T12, and it carries the position designator A071 in the system parts list, in the same functional area as the fuse indicator and semiconductor-fuse monitoring hardware. Related 0P2407 interface boards cover other DC voltage levels, so the 110 V DC rating is the key selection criterion for this part.
Key Technical Specifications
| Attribute | Value |
|---|---|
| Brand / series | GUTOR (Schneider Electric), 0P-series spare part boards |
| Part number | 0P2406A (base part 0P2406) |
| Product type | Interface fuse board (PCB) |
| Documented description | Interface Fuse FC UPS, 110 V DC, w.o. T1…T12 |
| Circuit voltage | 110 V DC |
| Fuse monitoring positions | T1 to T12 (without those transformers/positions in the delivered scope, per “w.o.” designation) |
| System position designator | A071 |
| Host system families | GUTOR PEW / PDW three-phase UPS systems |
Detailed Product Overview
In a GUTOR three-phase UPS, fuse monitoring is concentrated on dedicated interface boards rather than scattered through the power stage. The 0P2406 board carries the fuse interface function for the 110 V DC circuit and is associated with the fuse positions T1 through T12, which correspond to the semiconductor-fuse positions monitored in the system’s fuse scheme. In the spare parts list of a GUTOR PDW 3040-class UPS, the board appears at position A071, directly alongside the semiconductor fuse indicators and fuse microswitch hardware that form the rest of the fuse monitoring chain.
The “w.o. T1…T12” notation in the part description indicates the board is supplied without those fuse-related positions, which matters when comparing this board with other interface fuse variants in the same series: the delivered scope of the board, not just its part number, must match the system configuration. The 0P2406 board is also documented in use in GUTOR PEW 1005-class UPS systems, where it appears in material lists together with the 0P1162AA interface board, showing that the part is specified across more than one UPS size within the family.
The letter suffix in 0P2406A follows the GUTOR convention of revision-suffixed part numbers, where the base number 0P2406 defines the function and the suffix identifies the hardware revision. Because fuse interface boards must match the monitoring wiring and fuse layout of the specific system, the suffix fitted in a given system should be confirmed against that system’s master part list, identified by its system serial number, before ordering.

0P2406A

0P2406A
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Host system family | GUTOR PEW / PDW three-phase UPS systems | Documented in system spare parts lists and material lists |
| Circuit | 110 V DC fuse interface | Confirm the DC voltage class of the host system before ordering |
| Fuse positions | Associated with fuse positions T1 to T12 | The “w.o. T1…T12” designation defines the delivered scope; verify against the system configuration |
| System position | A071 in the parts list, in the fuse monitoring area | Check the designator against the system’s own master part list |
| Related interface boards | 0P2407 series (other DC voltage levels), 0P1162AA (documented alongside in PEW 1005-class systems) | Match the exact board to the system’s DC rating and wiring |
FAQ
What is the GUTOR 0P2406A?
It is an interface fuse board for GUTOR UPS systems, documented as “Interface Fuse FC UPS, 110 V DC, w.o. T1…T12”.
Which circuit does the 0P2406A serve?
It serves the 110 V DC fuse interface circuit of the UPS.
What does the “w.o. T1…T12” designation mean?
It indicates the board is associated with fuse positions T1 to T12 but supplied without those positions in its delivered scope, so the scope must be checked against the system configuration.
Which GUTOR systems use this board?
It is documented in GUTOR PDW 3040-class and PEW 1005-class UPS system part and material lists.
What is the position designator of this board?
A071, in the fuse monitoring area of the system parts list.
How should the correct board version be identified before ordering?
Confirm the revision suffix on the board fitted in the system and match it, together with the 110 V DC rating and the T1 to T12 scope, against the master part list of the specific system serial number.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626