Description
Core Product Summary
The GUTOR 0P9909 is an interface/fuse board used in Gutor BOP UPS equipment. It is associated with board designation PXW 0021404/r02 and is listed as a 110 VDC interface/fuse-board spare for the UPS system.
This board combines interface circuitry with fuse protection in the UPS control and distribution arrangement. For procurement or replacement planning, the GUTOR 0P9909 designation, the PXW 0021404/r02 board marking, and the 110 VDC system context should be checked against the installed unit before ordering.
Key Technical Specifications
| Item | Verified specification |
|---|---|
| Manufacturer | Gutor Electronic |
| Order number | 0P9909 |
| Product type | Interface/fuse board |
| Associated board designation | PXW 0021404/r02 |
| System context | BOP UPS application |
| Listed electrical context | 110 VDC |
| Product category | UPS spare part / interface and fuse board |
Engineering Selection Highlights
- The order number 0P9909 identifies a Gutor interface/fuse board, so it should be matched to the exact board fitted in the UPS rather than selected by cabinet model alone.
- The associated PXW 0021404/r02 designation provides a useful cross-check for identifying the correct board revision or variant.
- The listed 110 VDC context indicates that the board is intended for a 110 V DC interface/fuse application in the relevant UPS configuration.
- The BOP UPS association means the board should be evaluated as part of the UPS interface and fuse-protection arrangement, not as a general-purpose industrial fuse board.
- Before installation, compare the physical board layout, connector positions, fuse types, and printed identification with the removed board to avoid ordering an visually similar but functionally different spare.

0P9909

0P9909
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| UPS system family | Gutor BOP UPS application | The board is identified for use in BOP UPS equipment. |
| Board designation | PXW 0021404/r02 | Use this designation as an additional identification check against the installed board. |
| Electrical context | 110 VDC | Confirm the DC interface/fuse arrangement of the target UPS before fitting. |
Detailed Product Overview
The GUTOR 0P9909 is a specialized UPS spare part rather than a standalone power-supply product. It is an interface/fuse board associated with the PXW 0021404/r02 board designation and is identified for BOP UPS applications operating in a 110 V DC context.
Its practical function is to combine two related responsibilities: providing interface connections within the UPS arrangement and incorporating fuse protection for the associated circuits. This makes the board part of the UPS’s control, signaling, and protective distribution path. A failure, damaged fuse, or connector-related issue on such a board can therefore affect the interface function it supports, which is why it is maintained as a defined spare-part item.
For replacement planning, the most important identification details are the GUTOR 0P9909 order number, the PXW 0021404/r02 board marking, and the 110 V DC application context. These details should be checked against the board removed from the UPS, including its connector arrangement, fuse positions, and any revision markings. Physical similarity alone is not sufficient evidence that a board is interchangeable.
The board is best handled as a maintenance-oriented component for a Gutor BOP UPS. Its selection should be based on exact board identification and the installed system configuration, with installation performed only by personnel familiar with the UPS’s electrical arrangement and applicable isolation procedures.
Applications & System Role
Within a Gutor BOP UPS, the 0P9909 serves as an interface and fuse-protection board. Its role is to provide the board-level interface function while incorporating fuse protection for the associated 110 V DC circuit arrangement.
As a spare part, it is relevant where an existing interface/fuse board must be replaced during UPS maintenance or repair. The board should be treated as a system-specific component: its suitability depends on the installed UPS configuration and the exact board designation rather than on the 0P9909 number alone.
FAQ
What is the GUTOR 0P9909?
The GUTOR 0P9909 is an interface/fuse board for Gutor BOP UPS equipment.
Which board designation is associated with the 0P9909?
The board is associated with the PXW 0021404/r02 designation.
What electrical context is listed for this board?
The board is listed in a 110 V DC interface/fuse context.
What type of UPS application is it identified for?
It is identified for BOP UPS applications.
Is the 0P9909 a general-purpose fuse board?
No. It is a Gutor-specific interface/fuse board intended for the identified UPS application.
What should be checked before ordering a replacement?
Check the 0P9909 order number, the PXW 0021404/r02 board designation, the 110 V DC context, and the physical board identification against the installed unit.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626