Sale!

GUTOR 21382-2 REV. 2 PCB Circuit Board for 640-4049A

Item Verified specification
Manufacturer Gutor Electronic
Order number 21382-2
Product type Printed circuit board (PCB)
Revision REV. 2
Associated PCB assembly 640-4049A REV. 02
Associated board marking 6FFB13
Product category Industrial UPS / control PCB spare part
Identification basis Exact order number, revision, and board marking
Categories: , , , , Brand:

Description

Core Product Summary

The GUTOR 21382-2 is a printed circuit board (PCB) identified with revision 2. It is associated with the 640-4049A REV. 02 PCB assembly and the 6FFB13 board marking, which provide additional cross-checks for matching the installed component.

For replacement or maintenance planning, the 21382-2 order number, REV. 2 designation, 640-4049A association, and 6FFB13 marking should be checked against the board removed from the equipment. The available exact-model information identifies the PCB type and its board references, but does not establish electrical ratings, connector assignments, or system compatibility; these should not be inferred from the order number alone.

 

Key Technical Specifications

Item Verified specification
Manufacturer Gutor Electronic
Order number 21382-2
Product type Printed circuit board (PCB)
Revision REV. 2
Associated PCB assembly 640-4049A REV. 02
Associated board marking 6FFB13
Product category Industrial UPS / control PCB spare part
Identification basis Exact order number, revision, and board marking

 

Engineering Selection Highlights

  • The 21382-2 order number identifies the exact Gutor PCB reference and should be matched to the board installed in the equipment.
  • Revision 2 is part of the product identification and should be verified before selecting a replacement.
  • The associated 640-4049A REV. 02 assembly reference provides an additional cross-check between the order number and the board identification.
  • The 6FFB13 marking provides a further identification check for the physical board.
  • The board should be treated as a Gutor-specific spare part rather than a generic industrial PCB.
  • Connector positions, component layout, and printed markings should be compared with the installed board before ordering.
  • Do not infer voltage, current, communication, or system compatibility from the order number alone.
21382-2

21382-2

21382-2

21382-2

21382-2

21382-2

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Board association 640-4049A REV. 02 Use the 640-4049A reference as an additional identification check for the installed PCB.
Revision identification REV. 2 Confirm the revision marking before ordering or installing a replacement.
Board marking 6FFB13 Use this marking as a further cross-check for board identification.

 

Detailed Product Overview

GUTOR 21382-2 is a Gutor Electronic printed circuit board identified with revision 2, the 640-4049A REV. 02 assembly reference, and the 6FFB13 board marking. The available exact-model identification establishes the board type, revision, assembly association, and board marking; it does not provide a sufficiently supported description of its electrical function, interface, dimensions, or system-level compatibility.

This makes exact identification important for replacement planning. The 21382-2 order number, REV. 2 designation, 640-4049A association, and 6FFB13 marking should all be compared with the board installed in the equipment. A replacement should not be selected solely because another Gutor board has a similar physical appearance or a related order-number format.

The board should be handled as a system-specific spare part. Before installation, personnel should compare the connector arrangement, component layout, and printed markings with the removed board. These checks help ensure that the replacement corresponds to the intended revision and configuration.

Because the available exact-model information is limited, no claims should be made about voltage, current, communication protocol, firmware, certifications, mounting dimensions, or compatibility with a particular UPS series. The correct approach is to retain the complete identification from the installed board and match it before ordering or replacing the component.

 

Applications & System Role

The GUTOR 21382-2 sits within the Gutor UPS and industrial control spare-part category as a PCB-level component. It is associated with the 640-4049A REV. 02 assembly and is intended for identification and replacement within the relevant Gutor equipment configuration.

Its exact control, interface, or power-related role cannot be established from the available exact-model information. For maintenance purposes, it should be treated as a system-specific circuit board: the installed board’s order number, revision, board marking, and physical configuration determine whether the 21382-2 REV. 2 reference is the correct replacement.

 

FAQ

What is the GUTOR 21382-2?
The GUTOR 21382-2 is a Gutor printed circuit board reference.

What revision is associated with this board?
The identified revision is REV. 2.

Which Gutor PCB assembly is associated with 21382-2?
It is associated with the 640-4049A REV. 02 PCB assembly.

What additional board marking is associated with it?
The board is associated with the 6FFB13 marking.

Can electrical ratings or system compatibility be inferred from this reference?
No. Those details are not supported by the available exact-model information and should not be assumed.

What should be checked before ordering a replacement?
Check the 21382-2 order number, REV. 2 designation, 640-4049A association, 6FFB13 marking, connector layout, and printed board identification against the installed component.