Description
Core Product Summary (Brand / Model / Key Attributes)
The Gutor 0P2447 (including project/configured variant 0P2447-001) is a main processor and controller printed circuit board assembly engineered by Gutor Electronic (Schneider Electric) for three-phase industrial uninterruptible power supply (UPS) systems. Identified in Gutor spare parts documentation under reference designator A070 and bare printed circuit board identifier 640-1017, it functions as the central control unit for three-phase input / three-phase output (3PH/3PH) PxW and PDW series UPS architectures.
Configured with a 2 kHz pulse-width modulation (PWM) switching frequency and a 5 µs blanking time (5US BT), the board manages inverter gate drive timing, three-phase voltage and frequency regulation, rectifier supervision, and static bypass coordination. Built for internal installation within Gutor industrial UPS cabinets (such as PDW 3040 series systems), the 0P2447 coordinates power conversion stages and system protection across high-availability installations in power generation, nuclear auxiliary systems, oil and gas, and heavy industrial facilities.
Key Technical Specifications
| Technical Parameter | Verified Specification |
| Manufacturer | Gutor Electronic (Schneider Electric) |
| Model / Order Number | 0P2447 (configured variant: 0P2447-001) |
| Associated PCB / Location Codes | PCB 640-1017 / Reference Designator A070 |
| Product Type | Main Processor / UPS Controller Printed Circuit Board Assembly (PCA) |
| Phase Configuration | 3-phase input / 3-phase output (3PH/3PH) |
| PWM Switching Frequency | 2 kHz (2KHZ PWM) |
| Blanking Time (Dead Time) | 5 µs (5US BT) |
| System Compatibility | Gutor PxW / PDW series 3-phase industrial UPS systems (e.g., PDW 3040) |
| Mounting Type | Internal cabinet control rack / slot installation |
Detailed Product Overview
The Gutor 0P2447 serves as the primary control printed circuit board assembly (located at schematic reference A070) within Gutor three-phase input / three-phase output (3PH/3PH) industrial UPS systems. In three-phase industrial power conditioning equipment, the main controller governs inverter pulse-width modulation (2 kHz PWM), enforces dead-time protection (5 µs blanking time) between switching devices to prevent shoot-through faults, and coordinates rectifier, battery, and static bypass operations.
Manufactured on bare printed circuit board 640-1017, the assembly is specifically configured for 3PH/3PH PxW and PDW UPS topologies—distinguishing it from the companion 0P2446 controller board built on the same 640-1017 base PCB for three-phase input / single-phase output (3PH/1PH) systems. Because Gutor tailors main controller assemblies with project-specific firmware (HEX files) and configuration parameters matched to individual UPS cabinet ratings, verifying the exact order number (0P2447 or 0P2447-001), the PCB revision (640-1017), and the host system’s firmware version is essential during maintenance or spare-part replacement.

0P2447

0P2447
Engineering Selection Highlights
- 3-Phase / 3-Phase Architecture Specific: Configured exclusively for
3PH/3PHUPS topologies; distinct from the0P2446controller board used in3PH/1PHsystems despite sharing the640-1017bare PCB layout. - Defined Switching & Protection Timing: Engineered for
2 kHzPWM inverter control with a5 µsblanking time (5US BT), matching the power stage switching characteristics of compatible Gutor PDW/PxW cabinets. - Schematic Position A070: Occupies the primary controller slot (
A070) within the UPS control rack, interfacing directly with companion boards such as theA071DC interface fuse board. - Firmware & Project Alignment: Gutor main processor boards operate with system-specific firmware matched to the UPS serial number, voltage, and kVA rating; verify firmware chips or software load compatibility before installation.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| System Family | Gutor Industrial UPS Systems (PxW / PDW Series, e.g., PDW 3040) | Confirm exact match against the UPS cabinet serial number and OEM spare parts list. |
| Phase Topology | 3-phase input / 3-phase output (3PH/3PH) |
Do not substitute with 0P2446 (3PH/1PH version) even though both use PCB 640-1017. |
| Part Number Cross-Reference | 0P2447 / 0P2447-001 / PCB 640-1017 | Verify suffix, PCB revision (REV 01, etc.), and populated components match the installed unit. |
| Schematic / Slot Location | Reference Designator A070 | Install only in the designated main controller position specified in the cabinet wiring diagrams. |
| Firmware / Memory Devices | Project-specific UPS control firmware | Verify whether socketed firmware devices or configuration settings must be matched to the host cabinet. |
Dimensions, Mounting & Connection Notes
- Form Factor: Printed circuit board assembly with onboard processor heatsink, multi-pin ribbon headers, and edge/bus connectors for internal cabinet installation.
- Handling Precautions: Always wear a grounded electrostatic discharge (ESD) wrist strap when unpacking, inspecting, or installing the main processor board.
- Pre-Installation Documentation: Photograph and label all multi-pin ribbon cables, wire harnesses, DIP switches, and jumper positions on the existing board prior to removal so they can be replicated accurately on the replacement assembly.
- Connection Integrity: Secure the board cleanly in its designated rack or chassis mounting position and verify that all connectors and retention clips are properly seated before restoring control power.
FAQ
What is the Gutor 0P2447?
The Gutor 0P2447 is a main processor and UPS controller printed circuit board assembly manufactured by Gutor Electronic for three-phase industrial uninterruptible power supply systems.
What do the specifications “3PH/3PH, 5US BT, 2KHZ PWM” mean on the 0P2447?
They identify the board’s control configuration: three-phase input and three-phase output (3PH/3PH), a 5-microsecond blanking time (5US BT) for switching protection, and a 2 kHz pulse-width modulation (2KHZ PWM) inverter switching frequency.
What is the difference between Gutor 0P2447 and 0P2446?
Both assemblies are built on the 640-1017 bare printed circuit board and occupy schematic position , but the 0P2447 is configured for three-phase input / three-phase output (3PH/3PH) UPS systems, whereas the 0P2446 is configured for three-phase input / single-phase output (3PH/1PH) systems.
Which Gutor UPS systems use the 0P2447 controller?
It is documented for use in Gutor PxW and PDW series three-phase industrial UPS cabinets, including models such as the PDW 3040.
Verification & Troubleshooting Notes
- Safe Isolation Before Servicing: Place the UPS into Manual Bypass mode and isolate all AC and DC power sources feeding the control electronics in accordance with the OEM cabinet operating manual before removing or installing the controller board.
- Pre-Installation Configuration Check: Compare the replacement
0P2447against the original board to confirm identical PCB revision (640-1017), jumper/DIP switch positions, and required firmware version for the specific UPS serial number. - Post-Installation Verification: Re-energize control power per the OEM startup procedure, verify that the front operator display initializes cleanly without processor or PWM fault alarms, and confirm normal system status before transferring the load back from bypass.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626