Description
Core Product Summary
GUTOR OP2405A, also referenced as 0P2405A, is an interface fuse board associated with the PXW 640-0717 Rev 01 assembly. It is a board-level component intended for use in compatible Gutor industrial UPS equipment.
The available identification establishes the OP2405A board designation, the 640-0717 assembly reference, and the PXW association. Its electrical ratings, connector assignments, supported UPS models, firmware requirements, dimensions, and approval scope are not established for this exact designation in available manufacturer documentation.
Key Technical Specifications
| Item | Verified specification |
|---|---|
| Brand | GUTOR |
| Product designation | OP2405A / 0P2405A |
| Product type | Interface fuse board |
| Associated assembly reference | PXW 640-0717 Rev 01 |
| Board revision | Rev 03 |
| Product category | Industrial UPS control component |
Engineering Selection Highlights
- GUTOR OP2405A is identified as an interface fuse board. Use this designation to distinguish it from power modules, inverter-control boards, driver boards, and relay units.
- The board is associated with the PXW 640-0717 Rev 01 assembly. Match the assembly reference as well as the OP2405A designation when checking an installed board or parts list.
- The board revision is identified as Rev 03. Revision identification should be checked against the marking on the installed board before ordering a replacement.
- Exact-designation matching is important. Similar-looking Gutor interface boards may perform different fuse, signal-routing, or monitoring functions.
- The available identification does not establish electrical ratings or connector compatibility. Do not infer these parameters from similar Gutor part numbers or from general UPS-family descriptions.

OP2405A

OP2405A
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Assembly reference | PXW 640-0717 Rev 01 | Match the assembly reference as well as the OP2405A designation during parts identification. |
| Board revision | Rev 03 | Confirm the installed board revision before selecting a replacement. |
| UPS subsystem | Interface fuse board | This board is associated with the interface-fuse function, not the inverter-control or power-conversion function. |
Detailed Product Overview
GUTOR OP2405A is the product designation for an interface fuse board associated with the PXW 640-0717 Rev 01 assembly. It is a Gutor board-level component intended for compatible Gutor industrial UPS equipment.
For procurement and maintenance, the primary identification references are the GUTOR brand, OP2405A or 0P2405A designation, 640-0717 assembly reference, and Rev 03 board revision. These identifiers should be checked together against the equipment nameplate, wiring documentation, or the marking on the original board. Because Gutor UPS equipment can include multiple interface and control assemblies with similar physical formats, the exact designation should remain the primary selection reference.
The available information identifies the product’s type and assembly association but does not provide an OEM-published specification set for this exact designation. Electrical supply requirements, signal interfaces, firmware or configuration dependencies, physical dimensions, terminal assignments, operating limits, and certification scope therefore should not be assumed from related Gutor models. A replacement should be selected by matching the exact OP2405A designation, 640-0717 assembly reference, and board revision in the affected UPS documentation or on the original board.
Applications & System Role
Within a Gutor industrial UPS, GUTOR OP2405A is associated with the interface-fuse function of the PXW 640-0717 assembly. Its available identification identifies it as an interface fuse board but does not establish a specific UPS subsystem, cabinet position, or industry deployment.
The OP2405A, 640-0717, and PXW identifiers should be used together when confirming whether the board matches the installed assembly. The available information does not establish a defined signal-routing, monitoring, or power-conversion role beyond the interface-fuse-board classification.
FAQ
What is GUTOR OP2405A?
GUTOR OP2405A is an interface fuse board associated with the PXW 640-0717 Rev 01 assembly.
What is the associated assembly reference?
The associated assembly reference is PXW 640-0717 Rev 01.
What board revision is identified?
The board revision is identified as Rev 03.
What type of component is it?
It is an interface fuse board, not a power module or inverter-control board.
Can its electrical ratings be inferred from similar Gutor boards?
No. Electrical ratings, connectors, firmware needs, dimensions, and approvals are not established for this exact designation and should not be inferred from similar models.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626