Sale!

Harmonic Drive SC-510-5-230-S0 5A AC Servo Controller

Parameter Value
Manufacturer Harmonic Drive Systems
Model / order number SC-510-5-230-S0
Associated part number 702315.03
Product type AC servo controller
Series SC-510
Nominal current 5 A
Peak current 5 A
Nominal DC bus 320 VDC
Categories: , , , , SKU: SC-510-5-230-S0 Brand:

Description

Core Product Summary

The Harmonic Drive SC-510-5-230-S0 is an AC servo controller in the Harmonic Drive Systems SC-510 series. It is configured for a 5 A nominal current and is intended to drive Harmonic Drive RS and FHA series AC servo actuators in single-axis or multi-axis motion applications.

The controller uses digital closed-loop control with 16-bit feedback processing and accepts either a two-pole resolver or a TTL-level Hall encoder. Its RS-232 and RS-422 interfaces support setup, online ASCII command control, and integration with a PC, while its operating modes can be configured for use with CNC, PLC, and stepping-motor controller environments.

 

Key Technical Specifications

Parameter Value
Manufacturer Harmonic Drive Systems
Model / order number SC-510-5-230-S0
Associated part number 702315.03
Product type AC servo controller
Series SC-510
Nominal current 5 A
Peak current 5 A
Nominal DC bus 320 VDC
Nominal output power 2.17 kVA
Input AC 230 V, 50/60 Hz
Output AC 0–230 V, 5 A
Feedback systems Two-pole resolver or TTL-level Hall encoder
Encoder monitor A, B, and C signals according to RS-422
Communication interfaces RS-232 and RS-422
Control principle Digital closed-loop control with 16-bit feedback operation
Dimensions 173 × 152.5 mm (height × depth)
Compatible actuator families Harmonic Drive RS and FHA series AC servo actuators

 

Engineering Selection Highlights

  • The SC-510-5-230-S0 is a 5 A controller, so it matches applications whose servo actuator current demand falls within that controller rating.
  • Its 230 VAC input and 0–230 VAC output make supply and actuator voltage level a primary verification point before installation.
  • The controller is intended for Harmonic Drive RS and FHA series AC servo actuators, so actuator family and feedback type should be confirmed against the installed hardware.
  • Resolver or TTL-level Hall-encoder feedback support allows selection based on the feedback device fitted to the existing actuator.
  • RS-232 and RS-422 interfaces provide a path for setup software and ASCII-based online control from a PC.
  • The SC-510 series supports single- or multi-axis control through ASCII sequences, which is relevant when integrating several axes from a host controller or PC.
  • The 16-bit feedback operation and digital control principle are relevant where low-speed velocity behavior and positioning control are important.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Servo actuator family Harmonic Drive RS and FHA series AC servo actuators Confirm the installed actuator is one of these families before selecting this controller.
Feedback device Two-pole resolver or TTL-level Hall encoder Match the controller feedback configuration to the actuator’s fitted feedback system.
Encoder monitoring A, B, and C signals to RS-422 standard Use an encoder-monitor connection consistent with RS-422 signaling.
Host communication RS-232 or RS-422 interface Supports setup and online ASCII command communication with a PC.
Control environment CNC, PLC, and stepping-motor controller applications Operating modes are adjustable through setup software for these controller types.
Axis configuration Single-axis or multi-axis control via ASCII sequences Multi-axis operation depends on ASCII command sequences sent through the serial interface.

 

Dimensions, Mounting & Connection Notes

  • Dimensions: 173 mm height × 152.5 mm depth.
  • The controller is a cabinet-mounted industrial servo controller; confirm the available enclosure space against the published height and depth before ordering.
  • Feedback connections depend on whether the actuator uses a two-pole resolver or a TTL-level Hall encoder.
  • Encoder-monitor signals use A, B, and C channels according to the RS-422 standard.
  • Serial connections use RS-232 or RS-422 interfaces for setup and ASCII-based online control.

 

Detailed Product Overview

The Harmonic Drive SC-510-5-230-S0 belongs to the SC-510 family of digital AC servo controllers. Its model designation identifies a 5 A current configuration and a 230 VAC supply variant. The controller is designed to operate Harmonic Drive RS and FHA series AC servo actuators, which places it in the motion-control layer of an automation system rather than in a general-purpose I/O or process-control role.

A central selection consideration is feedback compatibility. The controller supports a two-pole resolver or a TTL-level Hall encoder, and it provides A, B, and C encoder-monitor signals according to RS-422. This means the existing actuator’s feedback hardware must be identified before substituting or configuring the controller. A controller with the correct current and voltage rating may still require configuration changes if its feedback input does not match the actuator.

The SC-510-5-230-S0 uses digital closed-loop control and 16-bit feedback operation. In practical terms, this supports controlled velocity behavior at low speeds and provides a basis for position-control applications. The available operating modes are selected through setup software, allowing the controller to be adapted to CNC, PLC, and stepping-motor controller environments.

For integration, the controller provides RS-232 and RS-422 serial interfaces. These interfaces support setup and online ASCII command communication from a PC. The SC-510 series can also perform single-axis or multi-axis control using ASCII sequences, so system designers should account for serial-command architecture, wiring, and host-software capability when planning an installation.

The published electrical configuration includes a 320 VDC nominal DC bus, 5 A nominal and peak current, and 2.17 kVA nominal output power. These values should be compared with the connected actuator’s rated current, supply arrangement, and duty requirements. The controller’s 230 VAC input and 0–230 VAC output further define the electrical envelope for a compatible installation.

SC-510-5-230-S0

SC-510-5-230-S0

SC-510-5-230-S0

SC-510-5-230-S0

Applications & System Role

The SC-510-5-230-S0 functions as the servo power and motion-control stage between a host controller and a compatible Harmonic Drive RS or FHA series AC servo actuator. It converts controller commands into controlled actuator motion while processing feedback from a resolver or Hall encoder.

Its configurable operating modes make it suitable for motion axes integrated with CNC equipment, PLC-based machines, and stepping-motor controller systems. The RS-232 or RS-422 interface also allows a PC to issue ASCII command sequences for single-axis or multi-axis control.

 

FAQ

What is the Harmonic Drive SC-510-5-230-S0?
It is a 5 A AC servo controller in the Harmonic Drive Systems SC-510 series, intended for RS and FHA series AC servo actuators.

What current rating does the SC-510-5-230-S0 have?
It has a 5 A nominal current rating and a 5 A peak current rating.

What supply voltage does it use?
The controller uses a 230 VAC, 50/60 Hz input and provides an AC 0–230 V output.

Which actuators is it designed to drive?
It is designed for Harmonic Drive RS and FHA series AC servo actuators.

What feedback options does it support?
It supports a two-pole resolver or a TTL-level Hall encoder and provides A, B, and C encoder-monitor signals according to RS-422.

Which communication interfaces are available?
The controller provides RS-232 and RS-422 interfaces for setup and online ASCII command communication.

Can it control more than one axis?
Yes. The SC-510 series supports single-axis or multi-axis control using ASCII sequences sent through its serial interface.

What is the associated Harmonic Drive part number?
The associated part number is 702315.03.