Sale!

HIMA X-DI3202A HIMax 32-Channel NAMUR Digital Input Module

The HIMA X-DI3202A is a 32-channel digital input module for the HIMA HIMax programmable electronic system. It evaluates signals from NAMUR proximity switches, safety proximity switches, and wired contacts, while monitoring each sensor circuit for open-circuit and short-circuit faults.

Categories: , , , , SKU: X-DI3202A Brand:

Description

Core Product Summary

The HIMA X-DI3202A is a 32-channel digital input module for the HIMA HIMax programmable electronic system. It evaluates signals from NAMUR proximity switches, safety proximity switches, and wired contacts, while monitoring each sensor circuit for open-circuit and short-circuit faults.

The module provides four short-circuit-proof sensor supplies, each feeding eight outputs at 8.2 VDC ±6%. Its switching thresholds are configurable in SILworX, and the module is TÜV-certified for safety-related applications up to SIL 3 under IEC 61508, IEC 61511, and IEC 62061, as well as Category 4 and PL e under EN ISO 13849-1. It installs in a HIMax base plate and requires a compatible connector board and system cable.

 

Key Technical Specifications

Category Specification
Product type HIMax digital input module
Number of input channels 32
Input type Unipolar digital inputs with common reference pole DI−
Signal sources NAMUR proximity switches, safety proximity switches, and wired contacts
Sensor supply 4 short-circuit-proof supplies, 8 outputs each
Sensor supply voltage 8.2 VDC, ±6%
Sensor supply current Maximum 12.5 mA per channel with sensor supply
Rated input current 0–9.25 mA
Switch-on threshold, low to high 1.80 mA
Switch-off threshold, high to low 1.40 mA
Switching thresholds Freely configurable in SILworX
Line monitoring Open-circuit and short-circuit monitoring
Measurement and testing Each input measured and functionally tested by two internal measuring facilities
Supply voltage 24 VDC, −15% / +20%; ripple factor 5% or less; SELV / PELV
Supply current Minimum 450 mA without sensor supplies; maximum 1 A with sensor supplies short-circuited
Current per channel 0 mA without sensor supply; maximum 12.5 mA with sensor supply
Galvanic isolation Inputs not isolated from each other; common AI− isolated from system bus and 24 VDC supply
Safe-state behavior On fault, module adopts safe state; assigned input variables transmit the configured initial value
Operating temperature 0 to 60°C
Storage temperature −40 to 85°C
Relative humidity Maximum 95%, non-condensing
Degree of protection IP20
Dimensions 310 × 29 × 230 mm (H × W × D)
Safety certification SIL 3, IEC 61508 / IEC 61511 / IEC 62061; Category 4, EN 954-1; PL e, EN ISO 13849-1

 

Engineering Selection Highlights

  • The X-DI3202A is intended for NAMUR-type safety proximity switches and wired contacts, so it is selected when sensor-circuit line monitoring is required.
  • Its 32 inputs share a common DI− reference pole and are not electrically isolated from one another.
  • Four short-circuit-proof supplies feed eight sensor outputs each, providing 8.2 VDC ±6% proximity-switch supply.
  • The switching thresholds can be configured in SILworX, allowing adaptation to the connected sensor’s current characteristics.
  • Open-circuit and short-circuit monitoring supports fault detection in each proximity-switch or contact circuit.
  • On a detected fault, the module adopts the safe state and transmits the configured initial value to the user program; initial values must be set to 0 for the documented fault behavior.
  • The module requires a HIMax base plate, a compatible connector board, and, where an FTA is used, a system cable; these items are not included with the module.
 X-DI3202A

X-DI3202A

 X-DI3202A

X-DI3202A

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Automation system HIMA HIMax programmable electronic system The module is intended for use in HIMax safety systems.
Base plate Any HIMax base plate slot except slots reserved for system bus modules Select an available I/O slot during cabinet layout.
Field connection Suitable HIMax connector board required The module cannot operate without a compatible connector board.
System cable Required when a field termination assembly (FTA) is used The system cable connects the connector board to the FTA.
Sensor type NAMUR proximity switches, safety proximity switches, or wired contacts Verify the sensor’s current characteristics against the configurable thresholds.
Sensor supply 8.2 VDC ±6%, maximum 12.5 mA per channel Four supplies feed eight outputs each.
Engineering software SILworX Used to configure the input switching thresholds.
Power supply 24 VDC, −15% / +20%; ripple factor 5% or less Supply must be SELV or PELV.
Safety configuration SIL 3, Category 4, and PL e applications Certification applies within the applicable HIMax safety-system configuration.

 

Dimensions, Mounting & Connection Notes

Item Verified data
Dimensions 310 mm high × 29 mm wide × 230 mm deep
Mounting method Insertion into a HIMax base plate slot
Permitted slot location Any base plate slot except slots reserved for system bus modules
Degree of protection IP20
Field connection Via a compatible HIMax connector board
FTA connection System cable required when an FTA is used
Included accessories Connector boards, system cables, and FTAs are not included
Operating temperature 0 to 60°C
Storage temperature −40 to 85°C
Relative humidity Maximum 95%, non-condensing

 

Detailed Product Overview

The HIMA X-DI3202A is a 32-channel digital input module for the HIMax programmable electronic system. It is designed to evaluate signals from NAMUR proximity switches, safety proximity switches, and wired contacts. The 32 inputs are unipolar and share a common DI− reference pole; they are not electrically isolated from one another.

Each input is measured and functionally tested using two internal measuring facilities. The module monitors the connected proximity-switch or contact circuit for open-circuit and short-circuit faults. If a fault occurs, the module adopts the safe state and transmits the configured initial value to the user program. HIMA specifies that initial values must be set to 0 so that input variables transmit 0 to the user program during a fault.

The module provides four short-circuit-proof proximity-switch supplies, each feeding eight supply outputs. The output voltage is 8.2 VDC with a tolerance of ±6%, and each input can draw up to 12.5 mA when using its assigned sensor supply. The rated input current range is 0–9.25 mA. The switch-on threshold is 1.80 mA and the switch-off threshold is 1.40 mA; both thresholds are freely configurable in SILworX.

The module requires a 24 VDC supply with a tolerance of −15% to +20%, a ripple factor of 5% or less, and SELV or PELV characteristics. It draws at least 450 mA without channel or proximity-switch supplies and up to 1 A when the proximity-switch supplies are short-circuited.

The X-DI3202A must be installed in a HIMax base plate and connected through a suitable connector board. Where a field termination assembly is used, a system cable is required to connect the connector board to the FTA. Connector boards, system cables, and FTAs are not included with the module.

The module is TÜV-certified for safety-related applications up to SIL 3 under IEC 61508, IEC 61511, and IEC 62061, up to Category 4 under EN 954-1, and up to PL e under EN ISO 13849-1. Its IP20 housing measures 310 × 29 × 230 mm. It operates from 0 to 60°C, can be stored from −40 to 85°C, and tolerates up to 95% non-condensing relative humidity.

 

Applications & System Role

The X-DI3202A is a safety digital-input module within a HIMA HIMax system. Its role is to acquire and test signals from NAMUR proximity switches, safety proximity switches, and wired contacts, then provide the resulting input states to the HIMax safety program.

The module continuously monitors each sensor circuit for open-circuit and short-circuit conditions. If a fault is detected, it enters the safe state and sends the configured initial value to the user program, supporting de-energize-to-trip safety behavior.

Typical fit scenarios are safety functions using inductive NAMUR proximity switches or wired contacts for position, guard, interlock, or process-status detection, where line supervision and SIL 3-rated input acquisition are required.

 

FAQ

What is the HIMA X-DI3202A?
The HIMA X-DI3202A is a 32-channel digital input module for the HIMax safety system. It evaluates NAMUR proximity switches, safety proximity switches, and wired contacts with line monitoring.

What sensor types are compatible with the X-DI3202A?
It supports NAMUR proximity switches, safety proximity switches, and wired contacts.

What sensor supply does the X-DI3202A provide?
It provides four short-circuit-proof supplies, each feeding eight outputs at 8.2 VDC ±6%. Each input can draw up to 12.5 mA.

Can the input thresholds be configured?
Yes. The switching thresholds are freely configurable in SILworX. The documented default switch-on threshold is 1.80 mA and the switch-off threshold is 1.40 mA.

Does the X-DI3202A monitor wiring faults?
Yes. It monitors each proximity-switch or contact circuit for open-circuit and short-circuit faults.

What happens when a fault is detected?
The module adopts the safe state and transmits the configured initial value to the user program. Initial values must be set to 0 for the documented fault behavior.

Which safety certifications apply?
The module is TÜV-certified up to SIL 3 under IEC 61508, IEC 61511, and IEC 62061, up to Category 4 under EN 954-1, and up to PL e under EN ISO 13849-1.

Which accessories are required for installation?
The module requires a HIMax base plate and a compatible connector board. If a field termination assembly is used, a system cable is also required. Connector boards, system cables, and FTAs are not included.