Description
Core Product Summary (Brand / Model / Key Attributes)
The ICS Triplex T8448 is a 40-channel Triple Modular Redundant (TMR) 24 VDC Zone Interface Module designed for the Rockwell Automation ICS Triplex Trusted safety system. Purpose-built for Fire and Gas (F&G) protection and specialized safety-critical applications, the T8448 provides a highly configurable interface capable of managing up to 40 field device points. Operating within a Trusted controller or expander chassis, each channel can be individually software-configured to handle 4-20 mA analog inputs, discrete digital inputs, or low-power digital outputs for zone-based detection and actuation loops.
Engineered for IEC 61508 SIL 3 safety environments, the T8448 utilizes a Hardware Implemented Fault Tolerant (HIFT) architecture across three isolated Field Interface Units (FIUs). The module’s 40 channels are segmented into 5 independent power groups of 8 channels each, allowing flexible zone allocation and isolated field power handling. Featuring 1 ms Sequence of Events (SOE) timestamping, 2500 V impulse withstand isolation, automatic per-channel over-current protection, and hot-swap replacement capabilities via SmartSlot or companion slot setups, the T8448 ensures continuous process safety and real-time fault detection without triggering unneeded process trips.
Key Technical Specifications
| Parameter | Specification |
| Manufacturer & Series | ICS Triplex / Rockwell Automation Trusted System |
| Model Number | T8448 |
| Module Type | Trusted TMR 24 VDC Zone Interface Module |
| System Architecture | Triple Modular Redundant (TMR) / Hardware Implemented Fault Tolerant (HIFT) |
| Safety Integrity Level | TÜV Certified for IEC 61508 SIL 3 applications |
| Total Channels | 40 channels (individually configurable as AI, DI, or DO) |
| Channel Grouping | 5 independent power groups (8 channels per group) |
| Analog Input Signal | 4-20 mA (for 2-wire or 3-wire gas/fire detectors) |
| Digital Input / Output | Boolean discrete states (inputs/actuators, break-glass units) |
| Measurement Accuracy | Voltage/Current: ±0.5% of reading + 1 count |
| Backplane Power Supply | 20 VDC to 32 VDC (27 W typical backplane power) |
| Field Supply Voltage | 18 VDC to 32 VDC (Nominal 24 VDC) |
| Field Current Rating | 2 A maximum per channel (3 A maximum per power group) |
| Sequence of Events (SOE) | Integrated 1 ms resolution time-stamped logging per channel |
| Isolation Barrier | 2500 V impulse withstand opto/galvanic isolation |
| Field Device Resets | Up to 5 programmable field device reset signals |
| Operating Temperature | -40 °C to 70 °C (-40 °F to 158 °F) |
| Relative Humidity | 5% to 95%, non-condensing |
| Dimensions (H × W × D) | 266 mm × 31 mm × 303 mm (10.5 in × 1.2 in × 11.9 in) |
| Module Weight | 1.36 kg (3.0 lb) |
Detailed Product Overview
The ICS Triplex T8448 TMR 24 VDC Zone Interface Module provides a specialized, flexible field signal interface for the Rockwell Automation Trusted safety chassis platform. Engineered specifically to address the demanding signal requirements of Fire and Gas (F&G) detection systems, Emergency Shutdown (ESD) zones, and burner hazard management, the T8448 interfaces with a broad spectrum of field instrumentation including 4-20 mA toxic or combustible gas detectors, flame sensors, thermal detectors, manual call points (break-glass units), and localized annunciator actuators.
Architecturally, the T8448 uses a triplicated design containing three internal Field Interface Units (FIUs)—one per slice—connecting to a central Field Termination Unit (FTU). Each of the 40 channels is continuously monitored and tested using triplicated diagnostic routines that perform analog-to-digital measurement on all signals. This design enables stuck-on and stuck-off failure detection, automated open-circuit/short-circuit line fault testing, and voltage/current validation without interrupting loop operation. The 40 I/O channels are electrically separated into five independent 8-channel power groups, allowing engineers to isolate power distribution and reset functions across distinct process zones.
The T8448 enhances incident reconstruction and telemetry by capturing Sequence of Events (SOE) timestamp data down to 1 ms resolution for signal transitions and line-fault conditions. Onboard automatic over-current protection eliminates the need for external channel fuses, while 2500 V impulse withstand isolation protects backplane processing circuits from field-side electrical surges. When paired with the SmartSlot link or adjacent companion slots, the module supports live online hot-swapping, allowing maintenance personnel to replace active modules without interrupting safety logic execution.

T8448
Engineering Selection Highlights
- Flexible Multi-Signal Channels: 40 channels individually configurable for 4-20 mA analog inputs, discrete digital inputs, or digital outputs within a single card slot.
- Zone-Based Power Grouping: 5 independent power groups (8 channels per group) allow segmented field power distribution and targeted zone resets.
- Fire & Gas System Integration: Direct interface compatibility with 2-wire and 3-wire gas detectors, flame detectors, heat sensors, and manual call points.
- Programmable Device Resets: Provides up to 5 programmable field device reset signals to clear latched detector conditions after test or alarm events.
- 1 ms Hardware SOE Timestamping: Captures high-precision time-stamped records of input state changes and line-fault events for detailed post-trip analysis.
- Comprehensive Line Diagnostics: Performs continuous triplicated testing for open circuits, short circuits, stuck-on, and stuck-off conditions without trip risk.
- Online Hot-Swapping: Supports SmartSlot or companion slot configurations for seamless module replacement without opening field loops or pausing main logic execution.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| Controller Chassis | Trusted T8100 Controller / T8300 Expander Chassis | Fits into standard I/O slots across primary processing or expansion racks. |
| Field Termination Unit | Trusted Field Termination Assembly / 8842 FTU | Connects to field devices via matching multi-core cable assemblies and termination units. |
| Safety Barrier Note | Intrinsic Safety (IS) Barriers | Not approved for direct connection into hazardous locations; requires external IS barriers when wiring into classified areas. |
| Companion Processor | Trusted T8110B TMR Main Processor | Transmits channel measurements and voting diagnostics across the Inter-Module Bus (IMB). |
| Software Toolset | Trusted System Toolset / System .INI File | System .INI configuration files define channel types (AI, DI, DO), threshold levels, and short-circuit templates. |
Dimensions, Mounting & Connection Notes
- Physical Dimensions: Height 266 mm (10.5 in), Width 31 mm (1.2 in), Depth 303 mm (11.9 in).
- Weight: 1.36 kg (3.0 lb).
- Mounting Method: Direct slot insertion into dedicated I/O module card guides of the Trusted chassis; locked via front panel retention levers.
- Field Interface Wiring: Multi-pin rear connector connects through field I/O cable assemblies to external termination units (e.g., 8842 FTU) for 2-wire or 3-wire field instrument connections.
- Thermal Operating Range: Rated for extended industrial temperatures from -40 °C to 70 °C (-40 °F to 158 °F) under forced-air cabinet ventilation.
FAQ
What is the primary application for the ICS Triplex T8448?
The ICS Triplex T8448 is a 40-channel TMR zone interface module specifically designed for Fire and Gas (F&G) protection and safety-critical zone monitoring within the Trusted system.
Can the channels on the T8448 be configured for different signal types?
Yes, each of the 40 channels can be individually configured via software as a 4-20 mA analog input, a discrete digital input, or a discrete digital output.
How are the channels organized on the T8448 module?
The 40 channels are divided into 5 independent power groups of 8 channels each, enabling zone-isolated field power distribution and reset controls.
Does the T8448 require external fuses for channel protection?
No, the module incorporates automatic per-channel over-current protection within its internal circuitry, eliminating the need for external per-channel fuses.
What is the Sequence of Events (SOE) timestamp resolution?
The T8448 automatically logs time-stamped state changes and line-fault status events with a 1 ms time resolution.
Can the T8448 connect directly to field instruments in hazardous areas?
No, the T8448 is not certified for direct connection to hazardous area field devices; appropriate Intrinsic Safety (IS) barriers or galvanic isolators must be used.
Verification & Troubleshooting Notes
- Front Panel LED Diagnostics: Monitor the front-panel LEDs assigned to each channel to verify logic states and identify field wiring faults (open or short circuits).
- System .INI Configuration: If a channel fails to register correctly, verify that the System .INI configuration file matches the physical field device type (4-20 mA AI, Boolean DI, or DO) and threshold limits.
- Line Fault Checking: Continuous diagnostic routines treat all inputs as analog to test for line breaks and short-circuit conditions; check field loop wiring and termination resistors if a line fault alarm persists.
- SmartSlot Maintenance: When replacing an active module, ensure the SmartSlot or adjacent companion slot link is active to permit seamless state transfer before removing the faulted card.
- Over-Current Recovery: If a channel trips on over-current, clear the field wiring fault; the automatic protection circuit will restore normal operation once the fault condition is removed.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626