Description
Core Product Summary (Brand / Model / Key Attributes)
The ICS Triplex T8480C is a 40-channel Triple Modular Redundant (TMR) 4–20 mA Simplex Analog Output Module for the Rockwell Automation ICS Triplex Trusted safety and critical control platform. Operating within a Trusted controller or expander chassis, this high-integrity analog module provides precise, fault-tolerant current loop signals to drive final control elements such as control valve positioners, variable speed drives, I/P converters, and process actuators. Built on a Hardware Implemented Fault Tolerant (HIFT) architecture, the T8480C ensures high reliability and operational continuity across critical process loops without single points of failure.
Certified for IEC 61508 SIL 3 application loops, the T8480C manages 40 isolated analog output channels grouped into independent power sections to maximize electrical protection and field power isolation. The module continuously executes automated internal diagnostic testing, including loop voltage/current monitoring and open-circuit detection, to verify output driver health without disturbing active process signals. Featuring 1 ms Sequence of Events (SOE) timestamping, high signal accuracy, and online hot-swapping capabilities via SmartSlot or companion slot configurations, the T8480C enables continuous process monitoring and seamless live module replacement without process disruption.
Key Technical Specifications
| Parameter | Specification |
| Manufacturer & Series | ICS Triplex / Rockwell Automation Trusted System |
| Model Number | T8480C |
| Module Type | Trusted TMR Simplex 4–20 mA Analog Output Module (40 Channels) |
| System Architecture | Triple Modular Redundant (TMR) / Hardware Implemented Fault Tolerant (HIFT) |
| Safety Integrity Level | TÜV Certified for IEC 61508 SIL 3 applications |
| Number of Channels | 40 isolated analog output channels |
| Output Signal Range | 0 mA to 22 mA (Nominal 4 mA to 20 mA range) |
| Output Type | Current loop source (Simplex field configuration) |
| Resolution / Accuracy | 12-bit D/A conversion; accuracy ±0.1% of full scale |
| Backplane Power Supply | 20 VDC to 32 VDC |
| Field Loop Voltage | 18 VDC to 32 VDC (Nominal 24 VDC) |
| Maximum Load Resistance | 750 Ω at 20 mA (with 24 VDC field power supply) |
| Diagnostic Features | Open-circuit detection, readback current verification, stuck-at fault testing |
| Sequence of Events (SOE) | Integrated 1 ms resolution time-stamped logging per channel state change |
| Isolation Barrier | Galvanic and opto-isolation from field to backplane logic |
| Power Dissipation | 22 W to 28 W typical (load dependent) |
| Operating Temperature | -5 °C to 60 °C (23 °F to 140 °F) |
| Non-Operating Temperature | -25 °C to 70 °C (-13 °F to 158 °F) |
| Relative Humidity | 5% to 95%, non-condensing |
| Dimensions (H × W × D) | 266 mm × 31 mm × 303 mm (10.5 in × 1.2 in × 11.9 in) |
| Module Weight | 1.25 kg (2.75 lb) |
Detailed Product Overview
The ICS Triplex T8480C TMR Analog Output Module serves as a vital actuation control node within the Rockwell Automation Trusted safety chassis architecture. Deployed across demanding process safety applications—such as turbomachinery speed control, fuel gas regulating valves, Emergency Shutdown (ESD) modulating bypasses, and critical pressure/flow loops—the T8480C converts digital control commands from the main T8110-series processors into highly accurate, continuous 4–20 mA analog signals.
At the hardware architecture level, the T8480C utilizes triplicated processing paths where output commands pass through three internal Fault Containment Regions (FCR A, B, and C). These processing channels continuously vote on control values and perform digital-to-analog conversion before driving the output stage. Internal closed-loop current readback circuits continuously compare actual output levels against target setpoints. If an internal component anomaly or channel drift occurs, the module automatically isolates the affected slice and flags a diagnostic alarm while maintaining the correct output current to the field.
The T8480C variant incorporates enhanced noise immunity and precision output calibration designed for stable operation across industrial power grids. Comprehensive diagnostic routines execute in the background without causing dips or spikes in output current, verifying open-circuit wiring, insufficient field supply voltage, and actuator loop impedance issues. Supporting 1 ms resolution Sequence of Events (SOE) timestamping, the module logs output setpoint shifts and diagnostic events to simplify post-trip root cause analysis. When paired with SmartSlot or companion slot configurations, the T8480C supports full live online hot-swapping, allowing maintenance personnel to replace active cards without interrupting field control loops.

T8480C

T8480C
Engineering Selection Highlights
- High-Density 40-Channel Analog Output: Accommodates 40 precision 4–20 mA current loops in a single 31 mm rack slot, optimizing control cabinet panel space.
- Fault-Tolerant Triplicated Processing: Hardware voting across internal processing paths prevents single-point hardware failures from causing spurious trips or loss of control.
- Closed-Loop Output Diagnostic Readback: Continuously measures actual field current against target commands to detect loop faults, open circuits, and driver drift.
- High Output Drive Capacity: Capable of driving loads up to 750 Ω at 20 mA using standard 24 VDC field power supplies.
- 1 ms Hardware SOE Timestamping: Records precise time-stamped logs of output value transitions and fault conditions for detailed event reconstruction.
- Hot-Swap & Hot-Standby Support: Enables module replacement during live system operation via SmartSlot or companion slot setups without opening field loops or stopping logic execution.
- TÜV Certified for SIL 3: Complies with IEC 61508 SIL 3 functional safety standards for deployment in high-integrity safety loops.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| System Chassis | Trusted T8100 Controller / T8300 Expander Chassis | Installs into standard I/O slots across primary processing or expansion racks. |
| Termination Assembly | Trusted Field Termination Assembly (FTA) | Connects via multi-core cable to analog output FTAs for field loop power and wiring termination. |
| Companion Processor | Trusted T8110B TMR Main Processor | Receives output setpoint arrays and diagnostic readback data across the Inter-Module Bus (IMB). |
| Software Toolset | Trusted System Toolset | Configures channel parameters, output ranges (4–20 mA / 0–20 mA), ramp rates, and fail-safe states. |
| Hazardous Area Barriers | External Intrinsic Safety (IS) Barriers | Requires external IS barriers or isolators when driving analog actuators located in hazardous/classified areas. |
| Connector Keying | Slot Polarization Pins | Requires correct mechanical keying pin removal on the rear interface connector to match assigned slot coding. |
Dimensions, Mounting & Connection Notes
- Physical Dimensions: Height 266 mm (10.5 in), Width 31 mm (1.2 in), Depth 303 mm (11.9 in).
- Weight: 1.25 kg (2.75 lb).
- Mounting Method: Slide-in insertion into designated I/O card slots of the Trusted chassis; locked into position using top and bottom retention levers.
- Field Wiring Connection: Rear multi-pin connector interfaces with dedicated multi-core cables connecting directly to external Field Termination Assemblies (FTAs).
- Thermal Management: Operates across a -5 °C to 60 °C (23 °F to 140 °F) ambient temperature range under forced-air cabinet ventilation.
FAQ
What is the ICS Triplex T8480C?
The ICS Triplex T8480C is a 40-channel Triple Modular Redundant (TMR) 4–20 mA analog output module designed for the Rockwell Automation Trusted safety system.
What types of field devices are driven by the T8480C?
The module drives modulating field control devices that accept 4–20 mA current signals, such as control valve positioners, I/P converters, variable speed drives, and speed governors.
How does the T8480C perform channel diagnostics?
The module utilizes internal closed-loop current readback circuits that continuously measure output current against commanded setpoints to detect open circuits, loop power loss, and internal hardware faults.
What load resistance can the T8480C drive?
When supplied with a standard 24 VDC field loop power supply, the T8480C can drive field loop loads up to 750 Ω at 20 mA.
Can the T8480C be replaced while the system is powered and online?
Yes, the module supports online hot-swapping using SmartSlot or adjacent companion slot configurations, enabling card replacement without interrupting active control loops.
What functional safety level is the T8480C certified for?
The T8480C is TÜV certified for use in safety-instrumented systems meeting IEC 61508 SIL 3 requirements.
Verification & Troubleshooting Notes
- Front Panel Indicators: Monitor module state LEDs: Green indicates healthy operational status, Amber indicates a channel line fault or degraded slice state, and Red/Off points to an internal module failure or loss of power.
- Channel Diagnostic Readback: If a channel reports a fault in the software environment, check the diagnostic buffer to distinguish between an open-circuit field loop, high loop resistance, or insufficient field supply voltage.
- Field Loop Power Checks: Verify that field supply voltage delivered to the Field Termination Assembly (FTA) remains within the 18 VDC to 32 VDC range under full 20 mA channel load conditions.
- SmartSlot Link Verification: Before removing an active module for maintenance, ensure via the engineering toolset that the SmartSlot link is established with the standby card to allow seamless setpoint transfer.
- Shielding & Grounding: Ensure signal cable shields are grounded at the FTA frame earth bar to prevent high-frequency noise interference on analog current loops.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626