Description
Core Product Summary (Brand / Model / Key Attributes)
The IDEC PF3S-PSA2 is a dedicated AC power supply module designed for the IDEC PF3S and FA-3S programmable logic controller (PLC) systems. Operating as the primary power source for the PLC rack, this module converts high-voltage alternating current into stabilized low-voltage direct current distributed across the system backplane to energize the main processing unit, expansion I/O modules, and system communication hardware.
Engineered with dual input voltage range capability, the IDEC PF3S-PSA2 accepts 100–120 VAC or 200–240 VAC nominal input at 50/60 Hz. It provides a regulated 12 VDC output rating of 2 Amps, delivering up to 24 Watts of total rated output power. The module features a front-panel power LED status indicator for visual operational diagnostics and fits into the designated power supply slot on the system base unit.
Key Technical Specifications
| Parameter | Specification |
| Brand | IDEC |
| Model / Part Number | PF3S-PSA2 |
| System Compatibility | IDEC PF3S / FA-3S Series PLC |
| Module Type | PLC System Power Supply Unit |
| Input Voltage Rating | 100–120 VAC / 200–240 VAC |
| Input Frequency | 50/60 Hz |
| Output Voltage | 12 VDC |
| Output Current | 2.0 A |
| Rated Output Power | 24 W |
| Diagnostic Indicator | Front-panel Power LED |
| Approximate Weight | 0.99 lbs (0.45 kg) |
Detailed Product Overview
The IDEC PF3S-PSA2 serves as the essential internal power distribution source for modular industrial automation configurations built on the IDEC PF3S and FA-3S PLC platforms. Positioned directly within the system rack, the power supply isolates line power from sensitive control electronics while delivering stable power across the internal backplane.
This module addresses flexible installation requirements by providing dual-range alternating current selection, accepting both 100–120 VAC and 200–240 VAC main supplies at 50/60 Hz. With an output capacity of 12 VDC at 2 Amps (24W total capacity), it yields sufficient current overhead to supply power to CPU units such as the PF3S-CP12 alongside a full row of digital, analog, or specialized function I/O expansion modules.
The front face of the module integrates a simple power indication LED that illuminated continuously under normal operating conditions. By maintaining tight voltage regulation and suppressing grid line noise, the module protects internal microprocessors and analog-to-digital signal conversion sub-circuits against control system instability.

PF3S-PSA2

PF3S-PSA2
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| PLC System Series | IDEC PF3S / FA-3S Series | Fits designated system rack slot. |
| Compatible CPU Units | e.g., IDEC PF3S-CP12 | Powers CPU via internal backplane bus. |
| Compatible I/O Modules | Digital & Analog PF3S I/O Units | Backplane power supply limited to 2A max output. |
| Input Power Source | 100–120 VAC / 200–240 VAC (50/60 Hz) | Verify proper voltage range connection prior to powering system. |
Dimensions, Mounting & Connection Notes
- Mounting Method: Rack-mounted module; installs directly into the left-most power slot of the PF3S / FA-3S PLC base rack.
- Physical Weight: Approximately 0.99 lbs (450 g).
- Power Connection: Screw-terminal connection block located on the front or lower access panel for incoming AC line, neutral, and protective earth grounding connections.
Engineering Selection Highlights
- System Native Compatibility: Designed specifically to seat into IDEC PF3S and FA-3S backplanes for power distribution across internal rack buses.
- Dual Line Input Flexibility: Accommodates either 100–120 VAC or 200–240 VAC main input sources for standard global industrial supply lines.
- 12VDC Regulated Output: Delivers 2.0 A (24W max) continuous direct current output to meet rack current-consumption calculations.
- Integrated Visual Diagnostic: Front-mounted LED panel light provides visual verification of incoming power supply status.
FAQ
What is the IDEC PF3S-PSA2?
The IDEC PF3S-PSA2 is a dedicated AC input power supply module designed to deliver DC power to IDEC PF3S and FA-3S PLC rack assemblies.
What input voltages are supported by the PF3S-PSA2?
This module supports nominal AC input ranges of 100–120 VAC and 200–240 VAC at a frequency of 50/60 Hz.
What are the output specifications for the IDEC PF3S-PSA2?
The module outputs a regulated 12 VDC voltage with a maximum current rating of 2 Amps (24 Watts total output).
Which PLC series uses the PF3S-PSA2 module?
It is designed specifically for the IDEC PF3S and FA-3S programmable controller series.
How does the module indicate power status?
The front panel features a power status LED indicator that stays illuminated when the unit is receiving input power and operating correctly.
Verification & Troubleshooting Notes
- No LED Indicator Light: Verify incoming primary AC line voltage matches the rated 100–120 VAC or 200–240 VAC spec at the input terminals. Ensure wiring connections and system grounding are intact.
- Rack Power Loss / System Inoperable: Perform a current load calculation on the rack. Total current draw from installed CPU and expansion I/O modules must not exceed the 2.0 A (24W) backplane limit provided by the power module.
- Mechanical Seating Check: Ensure the module is properly latched into the base rack connector to ensure stable contact across the backplane bus.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626