Description
Core Product Summary
The INDRAMAT TDM3.2-20-300-W0 is a single-axis AC servo controller from the Bosch Rexroth Indramat TDM servo-drive family. It is an analog servo drive module designed to operate an AC servo motor from a 300 VDC link-circuit supply in a machine-tool or production-machine motion-control axis.
The module is rated for a 20 A type and peak current, 15 A continuous current, and 6 kW continuous power. It uses natural-convection cooling, accepts setpoints through analog inputs, and stores drive parameters on a plug-in MOD programming module. The “W0” designation identifies the version supplied without a fan unit.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer / brand | INDRAMAT, Bosch Rexroth Indramat |
| Model number | TDM3.2-20-300-W0 |
| Product type | Single-axis AC servo controller / servo drive module |
| Drive family | INDRAMAT TDM servo drive modules |
| Control interface | Analog servo drive |
| Type current | 20 A |
| Peak current | 20 A |
| Continuous current | 15 A |
| DC link-circuit voltage | 300 VDC ±15% |
| Continuous power | 6 kW |
| Power loss at continuous current | 110 W |
| Cooling | Natural convection |
| Signal-processing supply | +24 VDC, 400 mA without external load |
| Programming / parameter storage | Plug-in MOD programming module |
| Protection rating | IP10 |
| Weight | 8 kg |
| Cooling configuration | W0: no fan fitted |
Engineering Selection Highlights
- The TDM3.2-20-300-W0 is a 20 A, 300 VDC analog servo controller, so the machine DC link and connected servo motor must match this voltage and current class.
- Its 15 A continuous-current rating and 6 kW continuous-power rating define the practical steady-state operating envelope; peak current is listed as 20 A.
- The W0 suffix identifies a naturally cooled version without a fan, so cabinet airflow and heat dissipation must be designed around natural convection.
- Drive parameters are held on the plug-in MOD programming module, which allows the controller configuration to be retained or transferred without repeated adjustment at the drive.
- The drive uses analog setpoint inputs, including differential or summing input arrangements, rather than a digital fieldbus command interface.
- The TDM 3.2 controller is matched to the servo motor through the MOD programming module and the connected motor-feedback configuration; the exact motor type and feedback interface should be confirmed before substitution.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Drive family | INDRAMAT TDM servo drive modules | The module belongs to the TDM 3.2 product group. |
| DC link supply | 300 VDC ±15% | The drive operates from a DC-link supply rather than directly from an AC mains input. |
| Servo motor | INDRAMAT AC servo motor, matched through the MOD programming module | Motor type, feedback, and control parameters must match the configured drive. |
| Programming module | MOD programming module | Parameters are set and stored on the removable MOD module. |
| Command interface | Analog setpoint input | Supports differential input or two summing inputs with zero-voltage reference. |
| Control supply | +24 VDC, 400 mA for signal processing without external load | Additional connected loads increase the 24 VDC demand. |
| Cooling | Natural convection; no fan fitted in W0 configuration | Do not substitute a forced-ventilation W1 configuration without reviewing the cabinet thermal design. |

TDM3.2-20-300-W0

TDM3.2-20-300-W0
Dimensions, Mounting & Connection Notes
The TDM3.2-20-300-W0 is an 8 kg single-axis servo controller module intended for cabinet installation in an INDRAMAT TDM drive system. It is cooled by natural convection and carries an IP10 protection rating, so it is not a stand-alone enclosed drive and must be installed in a suitable electrical enclosure.
The module connects to the 300 VDC link circuit, the AC servo motor, motor feedback, analog command circuitry, and the +24 VDC signal-processing supply. Its removable MOD programming module holds the drive’s adjustment parameters.
Detailed Product Overview
The INDRAMAT TDM3.2-20-300-W0 is a legacy single-axis AC servo controller in the TDM 3.2 series. Its model designation identifies the principal electrical configuration: a 20 A current class, a 300 VDC link-circuit voltage class, and a W0 cooling arrangement without a fitted fan. The drive is an analog servo controller rather than a digital fieldbus drive, so its command architecture is based on analog setpoint signals and drive-side adjustment through the MOD programming module.
Electrically, the controller is rated for 20 A type and peak current and 15 A continuous current. Its continuous power rating is 6 kW at the specified 300 VDC ±15% link-circuit voltage. The documented power loss at continuous current is 110 W, and the module weighs 8 kg. These values are relevant when sizing the DC-link supply, cabinet cooling, conductor routing, and mechanical mounting arrangement.
The W0 version uses natural convection and does not include a fan. This differs from forced-ventilation TDM variants, so replacement or system integration should preserve the intended cooling concept. The controller’s IP10 rating also confirms that it is intended for installation within a protective cabinet rather than exposed mounting.
Control parameters are stored on the plug-in MOD programming module. This modular arrangement separates the parameter set from the drive hardware: the MOD module is used to match the controller to the motor type and application configuration. The TDM design therefore reduces the need for manual calibration at the drive, while still requiring the correct motor, feedback, and MOD configuration for the installed axis.
The drive provides analog setpoint entry through either a differential input or two summing inputs referenced to zero volts. It also provides an externally adjustable drift offset, a potential-free relay contact for the ready state, and front-panel status and diagnostic indicators. These features support integration with legacy NC and motion-control systems that provide analog command signals.
In operation, the TDM3.2-20-300-W0 regulates an INDRAMAT AC servo motor in a single-axis motion loop. Documented application functions include high short-time acceleration torque, torque reduction through the I(red) input, and torque-controlled operation for mechanically coupled master and slave motors. These capabilities make the controller suitable for axis applications where controlled acceleration, load limitation, or coordinated motor operation is required.
Applications & System Role
The TDM3.2-20-300-W0 functions as the power and control stage for one servo axis. In an INDRAMAT machine architecture, it receives an analog speed or position-loop setpoint from the higher-level numerical control or motion-control system and regulates the connected AC servo motor accordingly.
The TDM drive family is documented for high-accuracy servo applications in NC machine tools, transfer lines, automation systems, and production machinery. In a typical NC installation, the drive operates as a variable-speed drive within the position-control loop, with the NC supplying the speed setpoint.
Documented TDM functions include high short-time acceleration torque, torque reduction through the I(red) input, torque-controlled master/slave operation for mechanically coupled motors, direction reversal for the same setpoint polarity, externally adjustable drift offset, and a potential-free relay contact for the drive-ready state. Front-panel diagnostic and status indicators support fault identification and troubleshooting.
FAQ
What is the INDRAMAT TDM3.2-20-300-W0?
It is a single-axis analog AC servo controller from the INDRAMAT TDM 3.2 servo-drive family.
What voltage does the TDM3.2-20-300-W0 use?
It operates from a 300 VDC link-circuit supply with a tolerance of ±15%.
What are its current and power ratings?
The drive is rated for 20 A type and peak current, 15 A continuous current, and 6 kW continuous power.
What does the W0 suffix mean?
W0 identifies the naturally cooled version without a fan fitted.
How are drive parameters configured?
Parameters are set and stored on the plug-in INDRAMAT MOD programming module.
What type of command interface does it use?
It uses analog setpoint inputs, with support for a differential input or two summing inputs referenced to zero volts.
Which motors does it control?
It controls an INDRAMAT AC servo motor; the motor type, feedback interface, and MOD programming-module configuration must match the installed axis.
What protection rating does the drive have?
The TDM3.2-20-300-W0 has an IP10 protection rating and is intended for installation in a suitable electrical enclosure.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626