Sale!

Ishida P-5433B RCU Circuit Board

  • Model: P-5433B (P-5433B-2)
  • Brand: Ishida
  • Series: Multihead Weigher Control Series
  • Core Function: Real-time weighing control and signal processing
  • Product Type: RCU Circuit Board / Control Card
  • Key Specs: Multihead Weigher Compatible | Multi-pin Interface | ESD-Safe PCB Design
  • Condition: New Original / New Surplus (Never refurbished).
  • Inventory Status: Obsolete/EOL mature platform component requiring strategic surplus stocking to prevent multihead weigher line stoppages.
Categories: , , , , SKU: P-5433B Brand:

Description

Key Technical Specifications

Parameter Value
Board Type RCU / Control Circuit Board
System Compatibility Ishida Multihead Weigher Systems
Mounting Format Motherboard / Sub-rack Slot Mount
Operating Voltage Standard internal logic rails (DC power)
Interface Connections Multi-pin ribbon cable and data connectors
Operating Temperature 0 to +45 °C
Enclosure Requirement Requires protective control cabinet housing
Country of Manufacture Japan
Weight ~0.4 kg
Protection Rating Open-board ESD sensitive component

 

Product Introduction & Supply Chain Strategy

The Ishida P-5433B is a precision RCU circuit board engineered to manage signal routing and processing within Ishida multihead weighers and automated packaging lines. It coordinates high-speed weighing logic, ensuring accurate product portioning across food and industrial packaging operations.

Securing this mature electronic component as a certified New Surplus asset defends against unexpected obsolescence failures. Sourcing genuine OEM stock avoids the hidden failures of refurbished boards, protecting Total Cost of Ownership (TCO) and ensuring long-term packaging line reliability.

 

Installation & Configuration Guide

1.Pre-Installation (Prep & Safety):Prerequisite.

Isolate main electrical power to the multihead weigher control cabinet and execute formal lock-out/tag-out (LOTO) protocols. Put on a grounded ESD wrist strap before touching circuit boards. Document existing jumper settings and cable connections.

Verification: Confirm zero voltage on internal power rails using a digital multimeter before handling components.

2.Removal:Mechanical Extraction.

Carefully disconnect all pluggable ribbon cables and data harnesses attached to the legacy P-5433B board. Release board retention clips or unfasten mounting screws, pulling the circuit card straight out of its backplane slot.

Verification: Inspect the backplane connector slots for dust, bent pins, or foreign debris before installing the replacement card.

3.Installation (Clone & Seat):Hardware Setup.

Configure any board-level jumpers or switches on the new Ishida P-5433B unit to match the exact settings of the old module. Slide the circuit card evenly into its designated slot and secure fastening screws or latches. Reconnect all data harnesses.

Verification: Visually check that all ribbon cables and connectors latch securely without pinched wires or loose pins.

4.Power-On & Testing:Commissioning.

Restore control power to the cabinet. Monitor boot diagnostic indicators on the controller interface to confirm normal processor initialization without hardware fault codes.

Verification: Verify that the weighing system completes its zero-calibration routine and communicates successfully with upstream packaging automation controllers.

P-5433B

P-5433B

P-5433B

P-5433B

Firmware/Software Versions & Upgrade Notes

  • Board Revision Baseline: Ensure the P-5433B hardware variant (such as P-5433B-2 suffixes) matches the specific machine generation and software version running on your Ishida control rack.
  • Compatibility Warnings: Do not mix incompatible circuit board revisions across legacy weigher sub-assemblies, as minor logic layout shifts can cause communication faults with parent processor cards.
  • Handling Best Practice: Always handle circuit boards by their edges while wearing an ESD-safe wrist strap to prevent static discharge from damaging sensitive onboard integrated circuits.

 

Frequently Asked Questions (FAQ)

  • Why is this Ishida P-5433B board classified as New Surplus rather than standard factory direct?

    This unit is an authentic, original OEM-manufactured product procured from verified surplus channels after plant inventory adjustments. It has never been installed in a live machine or subjected to operational electrical wear.

  • How can I verify this circuit board is not refurbished or repaired?

    We enforce a strict zero-tolerance policy against second-hand, repaired, or rebuilt electronics. Every board arrives in original packaging featuring pristine solder joints, unblemished gold finger contacts, and zero component replacement history.

  • What are the hidden risks of installing a refurbished circuit board in a multihead weigher?

    Refurbished boards frequently contain heat-stressed microchips, aged electrolytic capacitors, and repaired traces. These hidden flaws lead to intermittent weighing errors, random controller freezes, and expensive packaging line downtime.

  • Is the P-5433B board affected by manufacturer obsolescence?

    Yes, this legacy control card has been discontinued by the manufacturer, making verified New Surplus inventory extremely valuable for maintaining uninterrupted plant operations.

  • What warranty terms apply to this New Surplus circuit board?

    This product is backed by a comprehensive 1-year replacement warranty, delivering original OEM performance reliability and complete operational security.