Description
Key Technical Specifications
| Parameter | Specification |
| Manufacturer | KEBA Industrial Automation GmbH |
| Control System | KeControl C2 / K2-400 Modular I/O System |
| Module Type | Digital Input (DI) Expansion Module |
| Number of Inputs | High-density digital channel array (typically 16 / 32 channels) |
| Nominal Input Voltage | 24 V DC (−15% / +20% operating window) |
| Signal Type | Type 1 / Type 3 IEC 61131-2 digital input characteristics |
| Galvanic Isolation | Optocoupler isolation between backplane bus and field signals |
| Input Delay / Filter | Hardware configurable / software programmable noise filtering |
| Operating Temperature | 0 to +55 °C |
| Diagnostics | Channel-level logic LEDs and module status display |
Product Introduction & Supply Chain Strategy
This product is a Brand New Surplus unit. It is not used, not pulled from a decommissioned plant, and not refurbished. All modules undergo rigorous quality verification to ensure OEM-level reliability.
The KEBA K2-400 DI470A is a digital input module engineered for the KeControl C2 / K2-400 automation series, widely utilized in plastics injection molding machines, robotics, packaging systems, and heavy industrial automation. It collects discrete status signals from field sensors, safety switches, proximity detectors, and operator pushbuttons, delivering noise-filtered, opto-isolated data across the KEBA backplane bus to the main system CPU.
From a Total Cost of Ownership (TCO) perspective, maintaining a New Surplus KEBA K2-400 DI470A in spare inventory is a vital risk-mitigation strategy. Because legacy KEBA modules carry extended factory lead times, an unbuffered input card failure can cause multi-day plant shutdowns. Refurbished I/O cards from third-party resellers often carry degraded optocouplers and weakened solder joints that break down under machine vibration and thermal cycling. Deploying a genuine New Surplus unit guarantees full expected operating life, eliminates lead time variability, and ensures immediate drop-in restoration without machine re-programming.

K2-400 DI470A

K2-400 DI470A
Installation & Configuration Guide
Stage 1: Pre-Installation (Prep & Safety)
- Execute full Lock-Out/Tag-Out (LOTO) protocols on the main control cabinet feed and auxiliary 24 V DC field sensor power supplies.
- Allow a minimum of 5 minutes for backplane capacitors to discharge completely. Verify zero potential on field wiring terminals using a multimeter.
- Put on an ESD-grounded wrist strap connected to the enclosure’s primary earth grounding point before opening ESD protective packaging.
- Photograph all front terminal block connections, wire numbering, and module slot positions on the existing KEBA rack setup.
Stage 2: Removal
- Unthread the front retaining screws securing the KEBA DI470A module to the rack/DIN-rail chassis.
- Unplug the removable terminal block assembly carefully, pulling straight out to prevent stress on individual wire harnesses.
- Release the module locking mechanism and pull the board straight out along its rack guide rails to prevent bending rear backplane bus connectors.
Stage 3: Installation (Clone & Seat)
- Unbox the New Surplus KEBA K2-400 DI470A within an ESD-safe workspace.
- Verify that any address selection switches or physical coding keys on the rear module match the original failed unit.
- Align the card with the designated K2-400 slot guides and push firmly inward until the backplane connector fully seats. Tighten the retaining panel screws.
Stage 4: Power-On & Testing
- Re-engage the removable terminal block assembly until the side retention latches click into place.
- Re-energize 24 V DC logic and field supply breakers. Monitor the module front-panel status LEDs.
- Confirm that the module status LED shows green (RUN) and verify that individual channel LEDs illuminate correctly as field switches and sensors trip during machine setup.
Firmware/Software Versions & Upgrade Notes
- System Environment: Fully integrated within the KEBA KeStudio engineering suite and runtime environment.
- Hardware Revision Matching: Ensure the hardware index (e.g., DI470/A revision code) aligns with the existing rack configuration parameters defined in the KeStudio system project file.
- Firmware Configuration: The DI470A operates as an I/O slave card transparent to the host CPU. Input filter times and diagnostic handling are assigned via the central controller’s system configuration file during bootup.
Frequently Asked Questions (FAQ)
Q: Why is this New Surplus KEBA K2-400 DI470A priced higher than refurbished boards online, but lower than OEM list prices?
A: Our pricing reflects the market value of supplying authentic, unused OEM hardware. Refurbished I/O boards are frequently salvaged from decommissioned molding machines or press lines, carrying internal silicon fatigue and degraded optocouplers. While refurbished parts cost less initially, an intermittent channel failure can halt an entire production line. Our New Surplus stock delivers full OEM service life at a lower cost than factory special orders.
Q: Is this KEBA K2-400 module guaranteed to be completely new?
A: Yes. This module is 100% Brand New Surplus. It has never been installed in an active machine enclosure, never energized in a production environment, and carries zero operational wear. It originates from verified surplus reserves, machine builder system overstocks, and canceled automation projects.
Q: Can I hot-swap the KEBA card while the KeControl rack is powered up?
A: No. Hot-swapping the module while the backplane logic bus is energized is strictly prohibited. Unplugging or inserting the card under power can cause high-voltage transients across the backplane pins, damaging internal processing ICs and faulting the central system CPU.
Q: Will replacing this card require uploading new program code to the KEBA CPU?
A: No. The K2-400 is a pure hardware interface card. As long as you install the replacement in the exact same rack slot and keep the same wiring configuration, the KEBA system controller will automatically recognize the module and route signals according to your existing program logic.
Q: What warranty coverage comes with this New Surplus KEBA K2-400 module?
A: We back this New Surplus KEBA K2-400 with a comprehensive 1-Year functional warranty. Every card undergoes strict quality verification—including physical connector pin checks, ESD safety handling, and static electrical checks—to guarantee drop-in readiness out of the box.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626