Description
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | KEBA AG |
| Model | OP362-LD/W-5200 |
| Platform | Kemro K2-200 / KeControl |
| Display | 15-inch TFT, 16 million colors |
| Input Method | Touchscreen + membrane keyboard |
| Keys | 56 membrane keys, some with LEDs and labeling strips |
| External Inputs | 16 inputs (not EN 61131-2 conformant), for toggle switches etc. |
| Front Plate | 4× 22.5 mm openings for operator/signaling elements |
| Control Connection | Graphics interface (Panel Link) to KeControl PLC |
| Max Cable Length | Up to 20 m panel-to-control distance |
| Visualization | kemro.view.standard (runs on control; no runtime on panel) |
| Panels per Control | Maximum one operating panel per control |
| Construction | Housing with graphics display, front plate, ready for panel installation |
| Typical Application | Engel injection molding machines, general machine HMI |
Product Introduction
The KEBA OP362-LD/W-5200 is the 15-inch operator panel from the Kemro K2-200 platform, built for machine operation and visualization on KEBA KeControl PLCs. It pairs a 15-inch TFT touchscreen with 56 membrane keys — many LED-backed — and carries 16 inputs for external switching elements plus four 22.5 mm front-plate openings for pilot devices. It’s the panel you’ll find on thousands of Engel injection molding machines in service worldwide.
The panel links to the control over the graphics interface (Panel Link) at up to 20 m, and visualization runs via kemro.view.standard on the control itself — the panel needs no runtime license and no local program storage. That’s why the panel is field-replaceable: your machine program lives in the control, not the display. If your Engel or Kemro K2-200 machine has a cracked screen or a dead keyboard, this is the direct swap. Confirm your exact machine build and Kemro version with your documentation before ordering — panel variants differ by display size and key layout across the K2 family.

OP362-LD/W-520

OP362-LD/W-520
Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| Blank screen, no backlight | Panel power supply or fuse failure | ❌ Low | Measure panel supply voltage at the connection point with a multimeter; check cabinet fuses and 24 V rail | Fix supply first — dead panel fuses are common and cheap |
| Screen works, touch dead | Touch controller fault or damaged digitizer | ✅ High | Try navigating with the membrane keys; if keys work, the touch layer is the problem | Panel touch layer replacement — panel does not need full swap if keys still function |
| Screen image distorted / streaked | Panel Link cable or connector fault | ❌ Low | Reseat the graphics cable at both ends; inspect for bent pins, damage, or interference from power cables | Reroute or replace the Panel Link cable before replacing the panel |
| Keys unresponsive | Worn membrane keyboard or liquid ingress | ✅ High | Press each key and watch for LED feedback; check for signs of fluid contamination around key areas | Membrane keyboard replacement — on Engel machines this is a known wear item |
| Panel boots, no communication with control | Control-side fault or wrong Panel Link wiring | ❌ Low | Cycle control power; verify cable continuity end-to-end (max 20 m) | Fault is usually on the control or cable side, not the panel |
| Intermittent screen blanking | Loose connectors from vibration or thermal cycling | ✅ High | Open housing (power off), press home all internal connectors, inspect for cracked solder or heat marks | Reseat connectors; if blanking persists, panel hardware fault — replace |
Honest note from the field: on these panels, touchscreen and membrane keyboard wear kill far more units than the display itself, and a good number of “dead panel” calls turn out to be Panel Link cabling or cabinet 24 V supply issues. Work the table before ordering. If you’re still stuck, contact technical support with photos of the panel, the exact Engel/Kemro machine model, and the control’s diagnostic log — we’ll confirm whether the panel or the control is at fault.
Frequently Asked Questions
Q1: Will my machine program be lost if I swap this panel?
No — and this is the good news with the K2-200 architecture. The visualization runs on the control via kemro.view.standard; the panel itself holds no runtime program. Your machine logic and screens live in the KeControl PLC. Swap the panel, connect the Panel Link cable, power up, and the screens come back. That said, do a controlled shutdown of the machine before disconnecting anything — don’t pull a live panel on a hot molding press.
Q2: Is this a direct replacement for my Engel machine panel?
Usually, yes — the OP362-LD/W-5200 is the standard 15-inch panel for Engel machines running Kemro K2-200 controls. But verify first: KEBA built several panel sizes and key layouts in the OP36x family, and Engel used different variants across machine generations and clamping force ranges. Pull your panel’s nameplate, compare the full model string, and check your machine documentation. If your plate reads OP362-LDW-5200, you’re in the right place. If it reads something else, send us the nameplate photo and we’ll confirm before you order.
Q3: What condition is this unit in?
Because this panel is out of active production, availability splits between New Surplus (unused, original packaging, sourced through surplus channels) and Refurbished (tested used units). Every unit — new or refurbished — goes through our bench: inbound inspection against OEM markings, power-up on a 24 V supply, full display test across the 15-inch TFT for dead pixels and backlight uniformity, touchscreen accuracy check across the full matrix, all 56 keys function-tested with LED feedback verification, Panel Link communication handshake against a Kemro control, and a 24-hour continuous-run burn-in with thermal monitoring. Test reports, photos, and test videos are available on request. We’ll tell you exactly which condition you’re getting before payment — no surprises.
Q4: Why is this cheaper than what the OEM quotes?
The Kemro K2-200 platform is a legacy generation, and OEM replacement pricing on discontinued HMIs runs high because supply is thin. We source through surplus and refurbishment channels and pass the difference on. The hardware is genuine KEBA — the supply route is the only thing that differs. For a machine that may run another decade, a tested panel at a fraction of list price is usually the right economics versus a full control retrofit.
Q5: What warranty do you offer?
A 1-year replacement warranty covering functional failure under normal operating conditions — proper supply voltage, normal indoor machine-cabinet environment, no physical damage. Not covered: cracked glass from impact, liquid ingress (these panels sit right where hydraulic oil and release agent mist live on a press — clean the surface with approved agents only), and backplane/supply over-voltage. If a refurbished unit fails in warranty, we replace it or repair it at our bench, your choice.
Q6: The touchscreen on my panel is cracked. Do I need the whole unit?
Sometimes, no. The touch digitizer and membrane keyboard are the two failure points on this panel, and depending on unit revision, they can be serviced separately. Send us photos of the damage and the nameplate — we’ll tell you honestly whether a component-level repair is economical or whether a full replacement unit is the smarter move. Our repair bench handles KEBA panels regularly; typical turnaround is 3–5 business days including the full test sequence.
Q7: How fast can you ship, and do you ship internationally?
Yes — worldwide, via DHL, FedEx, or UPS. In-stock units ship within 1–2 business days. Because this is a discontinued panel, stock fluctuates week to week; refurbished units usually move faster than new surplus. Every unit ships in ESD-protective bagging, bubble-wrapped, double-boxed in heavy-duty corrugated, with a QC Passed label and test date. If your press is down, call us directly — we’ll confirm physical stock on the shelf and same-day shipping cutoff before you commit to the order.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626