Description
Core Product Summary
The Kollmorgen SERVOSTAR 620, ordered as S62000 (or S62000-NA), is a high-power digital servo amplifier belonging to the SERVOSTAR 600 (S600) series. It delivers 20 A rms continuous output current and 40 A rms peak current (for approximately 5 seconds) at a rated power of 14 kVA.
Designed for direct connection to three-phase 230–480 V supplies, the drive features a 120 mm wide IP20 panel-mount housing, onboard CANopen and RS-232 interfaces, an integrated intelligent position controller capable of storing up to 255 motion tasks, and universal feedback evaluation. It is intended for demanding industrial applications requiring high dynamic response and precise torque, velocity, or position control of larger servo motors.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Product type | Digital AC servo amplifier / drive |
| Series | SERVOSTAR 600 (S600) |
| Model / Order code | SERVOSTAR 620 / S62000 (S62000-NA) |
| Rated output current | 20 A rms continuous |
| Peak output current | 40 A rms (max. approx. 5 s) |
| Rated power | 14 kVA |
| Supply voltage | 3 × 230 V –10 % … 480 V +10 %, 50/60 Hz |
| DC-bus voltage range | 290–675 V |
| Output-stage frequency | 8 kHz (16 kHz possible at DC bus ≤ 400 V) |
| Width | 120 mm |
| Weight | approx. 7.5 kg |
| Enclosure | IP20 panel-mount |
| Auxiliary supply | 24 V DC (isolated) |
| Communication | CANopen + RS-232 onboard; expansion slot for fieldbus cards |
Engineering Selection Highlights
- 20 A continuous / 40 A peak current rating supports larger servo motors in high-dynamic applications.
- Wide 230–480 V three-phase supply range covers common industrial voltages worldwide.
- Compact 120 mm width reduces panel space compared with earlier high-power drives.
- Integrated position controller with memory for up to 255 motion tasks enables complex positioning sequences without an external motion controller.
- Universal feedback evaluation supports resolvers, incremental/sine encoders, EnDat, HIPERFACE, BiSS, and other common systems.
- Onboard CANopen and RS-232 plus expansion slot for PROFIBUS, EtherCAT, SERCOS, DeviceNet, etc.
- Parallel DC-bus capability and internal brake resistor support multi-axis energy sharing and regenerative operation.
- Standard protective functions include phase-fault monitoring, short-circuit protection, and over-voltage detection.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Motor types | Synchronous servo, linear, asynchronous motors | Matched to continuous and peak current ratings |
| Supply | 3-phase 230–480 V, 50/60 Hz | Grounded TN/TT networks preferred |
| Feedback | Resolver, encoder (incremental, sine, EnDat, HIPERFACE, BiSS) | Universal evaluation onboard |
| Communication | CANopen, RS-232 standard; optional fieldbus cards | Expansion slot required for PROFIBUS, EtherCAT, etc. |
| Control modes | Torque, velocity, position; integrated motion tasks | Up to 255 stored positioning tasks |
| Auxiliary power | 24 V DC isolated | Required for control electronics |
Dimensions, Mounting & Connection Notes
The SERVOSTAR 620 / S62000 is a panel-mounted IP20 unit measuring approximately 120 mm wide × 275 mm high × 265 mm deep and weighing about 7.5 kg. It is installed inside a control cabinet. Power, motor, and feedback connections use plug-in or screw terminals. Shield connections terminate directly on the amplifier. An external 24 V DC auxiliary supply is required. DC-bus terminals allow parallel connection of multiple S600 drives for energy sharing. An internal brake resistor is standard; external resistors can be added when higher regenerative capacity is needed.

SERVOSTAR 620 S62000

SERVOSTAR 620 S62000
Detailed Product Overview
The Kollmorgen SERVOSTAR 620, identified by the order code S62000 (or S62000-NA for the version without factory-installed expansion card), is the 20 A member of the SERVOSTAR 600 digital servo amplifier family. It provides 20 A rms continuous current and 40 A rms peak current for short durations, corresponding to a rated power of 14 kVA.
The amplifier connects directly to three-phase 230–480 V supplies and generates a DC-bus voltage in the range 290–675 V. The power stage operates at 8 kHz (switchable to 16 kHz when the DC bus remains below 400 V), delivering responsive current control for high-dynamic servo applications. Thermal dissipation at rated current is approximately 200 W.
Control electronics are powered by an isolated 24 V DC auxiliary supply. Onboard interfaces include CANopen for multi-axis networking and parameter distribution, plus an RS-232 port for commissioning. An expansion slot accepts optional cards for PROFIBUS, EtherCAT, SERCOS, DeviceNet, and other fieldbuses. Two analog inputs, digital I/O, and monitor outputs support a variety of command and diagnostic signals.
An integrated intelligent position controller stores up to 255 motion tasks, supporting complex positioning sequences, electronic gearing, and registration functions. Feedback evaluation is universal, covering resolvers as well as a wide range of incremental and absolute encoder protocols. Encoder emulation outputs are also available.
The 120 mm wide housing is designed for panel mounting in industrial control cabinets. Standard protection features include phase-loss detection, short-circuit protection, over-voltage monitoring, and support for emergency-stop functions. The drive is suitable for both new installations and as a replacement in existing S600-based machines.
Applications & System Role
The SERVOSTAR 620 functions as a high-power digital servo drive for precise closed-loop control of larger AC servo motors. Typical applications include machine tools, packaging lines, printing presses, material-handling systems, converting equipment, and multi-axis automation cells that require high continuous torque and rapid acceleration.
The integrated position controller and flexible networking options allow the drive to operate as a standalone motion axis or as part of a coordinated multi-axis system under a higher-level controller.
FAQ
What is the Kollmorgen SERVOSTAR 620 / S62000?
It is a 20 A rms digital servo amplifier from the SERVOSTAR 600 series, rated at 14 kVA for high-power servo motor control.
What are the continuous and peak current ratings?
20 A rms continuous and 40 A rms peak (approximately 5 seconds).
What supply voltage range does it accept?
Three-phase 230 V –10 % to 480 V +10 %, 50/60 Hz.
Does it include a position controller?
Yes. An integrated intelligent position controller can store up to 255 motion tasks.
Which communication interfaces are standard?
CANopen and RS-232. Additional fieldbuses are available via an optional expansion card.
What is the physical size?
Approximately 120 mm wide × 275 mm high × 265 mm deep, weight about 7.5 kg (IP20 panel-mount).
Is the S62000 still in production?
The S600 series is a mature product line; availability is typically through authorized distributors or the secondary market for replacement purposes.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626