Description
Core Product Summary (Brand / Model / Key Attributes)
The Kollmorgen SERVOSTAR 670 S67001 is a fully digital high-power servo amplifier engineered for precise speed, position, and torque control in demanding industrial automation applications. Operating from a 3-phase AC mains supply of 208 VAC (-10%) to 480 VAC (+10%), this unit provides a continuous output current rating of 70 A RMS per phase and delivers approximately 50 kVA of continuous power capacity.
Designed for complex motion architectures, the amplifier features built-in sinusoidal commutation, fully digital speed and current loops, and broad feedback support, including standard resolvers and high-resolution Sin-Cos encoder feedback systems. The S67001 integrates an internal power supply, dynamic brake control, and diagnostic display hardware, providing full operational protection against electrical and thermal faults within harsh cabinet environments.
Key Technical Specifications
| Specification | Value / Detail |
| Product Type | Fully Digital Servo Amplifier |
| Drive Series | Kollmorgen SERVOSTAR 600 Series (SERVOSTAR 670) |
| Model Reference | S67001 (Standard Version) |
| Mains Input Voltage | 3×208 VAC -10% to 3×480 VAC +10%, 50/60 Hz |
| Continuous Output Current | 70 A RMS per phase |
| Rated Output Power | Approx. 50 kVA |
| Auxiliary Supply Voltage | 24 VDC (for logic and control electronics) |
| Velocity Loop Bandwidth | Up to 400 Hz |
| Current / Commutation Frequency | 16 kHz (62.5 µs update rate) |
| Position Loop Update Rate | 250 µs (4 kHz) |
| Standard Feedback Interface | Resolver, Sine/Cosine Encoder |
| Enclosure / Mounting | Panel mount cabinet enclosure |
Detailed Product Overview
The Kollmorgen SERVOSTAR 670 S67001 operates as the high-capacity power stage within the SERVOSTAR 600 product family. By executing digital velocity, position, and space vector modulation (SVM) current control loops entirely in software, the drive delivers smooth low-speed performance alongside precise high-speed torque regulation across synchronous and asynchronous servo motor types.
The unit simplifies system integration through flexible command options, including ±10 V analog commands, master/slave pulse-following, and direct serial bus communication via RS-232. Parameterization and commissioning are managed through dedicated graphical software tools, while built-in encoder-equivalent outputs (ROD/SSI format) allow real-time position feedback pass-through to master PLCs or motion controllers without requiring secondary position feedback sensors on the motor shaft.

SERVOSTAR 670 S67001

SERVOSTAR 670 S67001
Engineering Selection Highlights
- 70 A RMS Continuous Output: Delivers high continuous current capacity to drive large industrial servomotors and heavy mechanical loads.
- Wide Input Voltage Range: Accepts 3-phase mains supplies from 208 VAC up to 480 VAC without external step-down transformers.
- High Bandwidth Digital Control: Features a 400 Hz velocity loop bandwidth and 16 kHz current loop execution for fast acceleration dynamic response.
- Encoder Equivalent Output: Provides programmable ROD (A quad B) or SSI position feedback outputs to master controllers directly from the drive.
- Built-in Diagnostics: Equipped with an integrated 3-digit 7-segment LED display and diagnostic error log for real-time status monitoring without a PC connection.
Dimensions, Mounting & Connection Notes
- Mounting: Vertical panel mounting inside a grounded metallic electrical enclosure to meet EMC and cooling requirements.
- Power Wiring: Connect 3-phase mains directly to main power terminals; ensure appropriate line filters and external fuses are installed according to wiring guidelines.
- Thermal Management: Requires clear vertical spacing above and below the amplifier heatsink assembly to ensure adequate convection airflow.
- Shielding: Motor power, feedback, and command cables must use continuous braided shields bonded directly to the amplifier ground plane to minimize high-frequency noise interference.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| Compatible Motors | Synchronous AC Servo Motors / Asynchronous Motors | Requires proper feedback cable and motor parameter pairing in setup software |
| Control Hardware | Master PLC, Motion Controller, or CNC system | Accepts ±10 V analog, pulse/direction, or RS-485 master/slave pulse following |
| Logic Power | External 24 VDC Power Supply | Powers control logic, enable inputs, and optional holding brake circuits |
| Expansion Slots | SERVOSTAR 600 Fieldbus Expansion Cards | Accommodates optional fieldbus cards (e.g., PROFIBUS DP, DeviceNet, EtherCAT, SERCOS) |
FAQ
What is the Kollmorgen SERVOSTAR 670 S67001?
The Kollmorgen S67001 is a high-power fully digital AC servo drive belonging to the SERVOSTAR 670 (S600) series, rated for continuous output currents up to 70 A RMS.
What input voltage does the S67001 require?
It operates from a 3-phase AC input supply ranging from 208 VAC (-10%) to 480 VAC (+10%) at 50/60 Hz, along with an auxiliary 24 VDC supply for control logic.
What motor feedback types does the standard drive support?
The amplifier natively supports resolver feedback systems as well as high-resolution Sine/Cosine encoders.
Does the drive require external software to set up?
Basic diagnostic checks and parameter setups can be conducted via the front-panel display unit, but detailed commissioning, loop tuning, and motor setup are performed using Kollmorgen graphical setup software over RS-232.
Verification & Troubleshooting Notes
- Front Panel LED Display: Monitor the 3-digit LED readout to identify active status codes, warnings (e.g., phase loss), or fault conditions (e.g., overvoltage, overcurrent, overtemperature).
- Fault Reset Procedure: Clear transient error codes via the front reset button or through the software disable (F12) command once the fault root cause is resolved.
- Capacitor Discharge Time: Wait at least 10 minutes after disconnecting AC mains power before touching live power terminals or bus bars, verifying zero voltage with a calibrated meter.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626