Description
Core Product Summary
The Kongsberg Maritime RCU502i (part no. 421768) is a remote controller unit — a real-time process control computer — used within the Kongsberg K-Chief 700 marine automation system and the K-Safe safety control and monitoring system. It belongs to the Kongsberg RCU controller family (RCU501 / RCU502 / RCU502i / RCU602) and operates on the common Kongsberg hardware platform running AIM Basis Software (releases V8.3 through V8.8 are covered by the system’s type approvals).
The RCU502i is type approved by DNV GL, Bureau Veritas and Lloyd’s Register as part of the K-Chief 700 / K-Safe system, for marine and offshore applications in environmental categories ENV1, ENV2 and ENV3, and is certified for installation in hazardous areas (Ex Zone 2) under referenced ATEX certificates. The K-Safe software basis has been certified by TÜV Rheinland for compliance with IEC 61508 up to SIL3 applications, making the RCU502i suitable for safety-related duties such as emergency shutdown, process shutdown and fire & gas detection when configured within K-Safe.
Physically, the unit is a cabinet-mounted module with IP20/IP2X enclosure rating, approved for ambient location classes Temperature B / Humidity B / Vibration A / EMC B, with a specified standard compass safe distance of 29 cm (14 cm from the steering compass). Observed hardware revisions in service include Rev. 1.1.2 and Rev. 1.3.0.
Note: interface-level technical specifications (port counts, CPU and memory details) for the RCU502i are documented in the manufacturer’s restricted hardware documentation (Hardware Module Description no. 429804, Datasheet no. 429810) and are not reproduced here; contact Kongsberg Maritime for the authoritative specification of a given revision.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Remote Controller Unit (real-time process control computer) |
| Model | RCU502i |
| Part number | 421768 |
| Observed hardware revisions | Rev. 1.1.2, Rev. 1.3.0 (nameplate data from units in circulation) |
| Manufacturer | Kongsberg Maritime AS, P.O. Box 483, NO-3601 Kongsberg, Norway |
| System platform | K-Chief 700 marine automation system / K-Safe safety control and monitoring system (common hardware platform) |
| Controller family | RCU 501 / RCU 502 / RCU 502i / RCU 602 |
| System software | AIM Basis Software V8.3, V8.5, V8.6, V8.7, V8.8; AIM Safe System Software versions 8.3.4 up to 8.6.0 certified by TÜV Rheinland to IEC 61508 up to SIL3 |
| Environmental location classes | Temperature B / Humidity B / Vibration A / EMC B (per DNV GL type approval) |
| Application categories | Marine and offshore, environmental categories ENV1, ENV2, ENV3 (per Lloyd’s Register type approval) |
| Low temperature test | ‘-15 °C / 16 hours (per Lloyd’s Register type approval) |
| Enclosure rating | IP20 (per DNV GL type approval); IP2X (per Lloyd’s Register type approval) |
| Hazardous area approval | Certified for hazardous zones/spaces (Ex Zone 2) — refer to ATEX certificates Nemko 14 ATEX 1504 X and Presafe 18 ATEX 12094 X with special conditions for safe use |
| Compass safe distance | 29 cm standard / 14 cm steering compass (per Lloyd’s Register type approval) |
| Type approvals | DNV GL TAA00000W5 Rev.2; Bureau Veritas 53826/A0 BV; Lloyd’s Register 18/20018(E1) — as components of the K-Chief 700 / K-Safe system approval |
Detailed Product Overview
The RCU502i occupies the controller tier of Kongsberg Maritime’s K-Chief 700 and K-Safe architectures. In a typical installation, operator stations provide supervision and alarm handling, while remote controller units such as the RCU502i execute the underlying control and monitoring logic, interfacing with the system’s distributed I/O — the RIO hardware line includes remote multipurpose I/O modules (RMP420, RMP422/RMP422S variants), remote digital I/O modules (RDIO401S, RDIO420S, RDIOR420), remote termination boards (RTB420), serial line communication interfaces (RSER200-4) and communication hubs/repeaters (RHUB200-5), together with dedicated termination boards for the Kongsberg RBUS and SPBus field buses.
Its position in both K-Chief 700 and K-Safe is significant. K-Chief 700 carries alarm and monitoring, power management, and control of machinery, cargo, ballast, vessel mode and HVAC; K-Safe carries alarm management, emergency shutdown (ESD), process shutdown (PSD) and fire & gas detection and protection, with configurations ranging from single systems (K-Safe 1) up to 1oo2 redundant dual-I/O arrangements (K-Safe 3). A controller that can serve in this safety context is qualified accordingly: the AIM Safe System Software basis (versions 8.3.4 up to 8.6.0) has been certified by TÜV Rheinland for IEC 61508 compliance up to SIL3 applications. Note that Lloyd’s Register conditions this with a limitation: where K-Chief or K-Safe implements emergency stop or safety-critical functions, the software must additionally satisfy LR’s Software Conformity Assessment, or an equivalent integrity measure such as independent hard-wired backup or diverse redundancy must be applied.
Environmental qualification is robust rather than extreme: location classes Temperature B / Humidity B / Vibration A / EMC B per the DNV GL approval, application in LR environmental categories ENV1–ENV3, and a low-temperature test at -15 °C over 16 hours. The IP20/IP2X enclosure rating confirms the unit is designed for installation inside cabinets or enclosed panels rather than exposed locations — consistent with the FS-series field station cabinets in which Kongsberg controllers are normally fitted.
For hazardous-area installations, the unit is covered under the Kongsberg Ex certification scheme (ATEX certificates Nemko 14 ATEX 1504 X and Presafe 18 ATEX 12094 X), approved for Ex Zone 2 applications subject to the special conditions for safe use stated in those certificates. This distinguishes the “i”-designated line within the RCU family and matters when a controller must be located in zones such as cargo pump rooms or hazardous cargo areas.
Electromagnetic installation requirements also apply at system level: the type approval requires a mains filter (similar to Schaffner type FN2080-16-06) for the RIO hardware line (RCU501, RSER200-4, RHUB200-5, RMP200-8) — an installation point to verify against the specific I/O line paired with your RCU502i.
Maintenance-wise, units in service carry revision designations (e.g. Rev. 1.1.2, Rev. 1.3.0). Kongsberg has issued Safety Bulletin KM01-2025 concerning communication loss on the RBUS in specific systems using RCU502-family controllers, with the permanent remedy being a firmware update (version 1.1.1 or higher) performed by a Kongsberg Maritime service engineer; a restart of affected units serves only as a temporary workaround. Fleet operators should verify the firmware status of their RCU units with Kongsberg service as part of planned maintenance.

RCU502i

RCU502i
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| System family | K-Chief 700 marine automation system and K-Safe safety control and monitoring system (common hardware platform) | RCU502i is an approved controller module within both systems’ type approvals |
| Controller family | RCU 501 / RCU 502 / RCU 502i / RCU 602 | Replacement parts should match the revision configured in your system |
| System software | AIM Basis Software V8.3, V8.5, V8.6, V8.7, V8.8 | Software version must match the approved system configuration |
| Safety applications | AIM Safe System Software 8.3.4–8.6.0, TÜV Rheinland certified to IEC 61508 up to SIL3 | Safety-critical functions additionally subject to LR Software Conformity Assessment or equivalent integrity measures |
| Remote I/O modules | RMP420, RMP422 / RMP422i / RMP422S / RMP422Si, RDIOR420, RDIO401S, RDIO420S, RTB420 | I/O line per the K-Chief 700 / K-Safe hardware list |
| Communication modules | RSER200-4 serial line interface, RHUB200-5 communication hub and repeater, RMC-ST remote media converter, BUS-Term termination board | BUS-Term terminates the Kongsberg RBUS and SPBus |
| Class society approvals | DNV GL, Bureau Veritas, Lloyd’s Register (as part of K-Chief 700 / K-Safe system approval) | Valid for installation on vessels classed by the respective society |
| Hazardous areas | Ex Zone 2 per ATEX certificates Nemko 14 ATEX 1504 X and Presafe 18 ATEX 12094 X | Observe the special conditions for safe use in the certificates |
| EMC installation | Mains filter (similar to Schaffner FN2080-16-06) required for the RIO line (RCU501, RSER200-4, RHUB200-5, RMP200-8) | Verify filter provision for the paired I/O line |
| Firmware status | Safety Bulletin KM01-2025: RBUS communication loss in specific systems; permanent fix = firmware ≥ 1.1.1 applied by a KM service engineer | Verify fleet firmware status with Kongsberg service |
| Place of production | Kongsberg Maritime AS, Kongsberg, Norway (production also at Norautron, Horten, Norway) | Per Lloyd’s Register type approval |
Dimensions, Mounting & Connection Notes
| Item | Detail |
|---|---|
| Enclosure rating | IP20 (DNV GL approval) / IP2X (Lloyd’s Register approval) — install inside a cabinet or enclosed panel |
| Typical installation | Field station cabinet (FS400 / FS240 / FS120 / NDU cabinets per the K-Chief 700 hardware list) |
| Ambient location classes | Temperature B / Humidity B / Vibration A / EMC B |
| Low temperature qualification | ‘-15 °C / 16 hours |
| Compass safe distance | 29 cm (standard compass) / 14 cm (steering compass) — respect these distances from magnetic compasses |
| Hazardous area installation | Ex Zone 2 permitted; follow the special conditions in ATEX certificates Nemko 14 ATEX 1504 X / Presafe 18 ATEX 12094 X |
| Bus connections | Kongsberg RBUS and SPBus (termination via BUS-Term board); field bus and I/O cabling per the system’s hardware module description |
| Revision matching | Match replacement units to the hardware revision and firmware level of the installed system configuration; firmware updates on RBUS-affected systems require a Kongsberg Maritime service engineer |
| Physical dimensions and weight | Not published in the publicly accessible type approval documents — refer to the manufacturer’s Hardware Module Description no. 429804 / Datasheet no. 429810 for exact dimensions, mounting and connection data |
FAQ
What is the Kongsberg RCU502i?
The RCU502i is a remote controller unit — a real-time process control computer — from Kongsberg Maritime, part no. 421768, used in the K-Chief 700 marine automation system and K-Safe safety system.
How does the RCU502i differ from the RCU502?
Both are members of the RCU 501/502/502i/602 controller family within the same system approvals. The RCU502i is distinguished by its hazardous-area coverage — the “i” line is approved for Ex Zone 2 installations under referenced ATEX certificates. Revision and firmware levels also differ; always match the configuration of your system.
What systems is the RCU502i used in?
K-Chief 700 (alarm and monitoring, power management, machinery/cargo/ballast/vessel mode and HVAC control) and K-Safe (alarm management, emergency shutdown, process shutdown, fire & gas detection).
Is the RCU502i suitable for safety applications?
Yes, when configured within K-Safe: the AIM Safe System Software versions 8.3.4 up to 8.6.0 are certified by TÜV Rheinland for IEC 61508 compliance up to SIL3 applications. Safety-critical implementations may additionally require the class society’s software conformity assessment.
Can the RCU502i be installed in hazardous areas?
Yes — it is covered for Ex Zone 2 hazardous zones/spaces under ATEX certificates Nemko 14 ATEX 1504 X and Presafe 18 ATEX 12094 X, subject to the special conditions for safe use stated in those certificates.
What enclosure rating does the RCU502i have?
IP20 (per the DNV GL type approval; listed as IP2X in the Lloyd’s Register approval), so it must be installed inside a cabinet or enclosed panel.
What environmental conditions is the RCU502i approved for?
Location classes Temperature B / Humidity B / Vibration A / EMC B, marine and offshore applications in environmental categories ENV1, ENV2 and ENV3, with low-temperature qualification at -15 °C for 16 hours.
What is the compass safe distance for the RCU502i?
29 cm for a standard compass and 14 cm for a steering compass, per the Lloyd’s Register type approval.
Which I/O modules work with the RCU502i?
The K-Chief 700 / K-Safe I/O line: RMP420, RMP422 / RMP422i / RMP422S / RMP422Si, RDIOR420, RDIO401S, RDIO420S, RTB420, plus RSER200-4 and RHUB200-5 communication modules.
What is Safety Bulletin KM01-2025 and does it affect my RCU502i?
Kongsberg Maritime issued Safety Bulletin KM01-2025 addressing a communication loss issue on the RBUS in specific systems using RCU502-family controllers. The permanent fix is a firmware update to version 1.1.1 or higher, performed by a Kongsberg Maritime service engineer; restarting affected units is only a temporary workaround. Verify the firmware status of your RCU controllers with Kongsberg service.
Where can I find detailed interface specifications for the RCU502i?
In the manufacturer’s controlled documentation: Hardware Module Description no. 429804 (Rev. A, January 2018) and RCU502i Remote Controller Unit Datasheet no. 429810 (Rev. A, January 2018), available from Kongsberg Maritime.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626