Description
Core Product Summary
The Kongsberg RCU502 is a Remote Controller Unit (RCU) and real-time process-control computer for Kongsberg Maritime automation systems. It performs process-control processing and acts as a remote I/O bus driver in marine, offshore, and industrial control applications.
The RCU502 is based on a 32-bit PowerPC MPC8245 processor running at 400 MHz, with 64 MB of RAM and 32 MB of Flash memory. It runs the VxWorks real-time operating system and provides dual RedNet Ethernet interfaces for redundant network configurations. The unit is powered from 24 V DC nominal and consumes up to 20 W.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Kongsberg Maritime |
| Model | RCU502 |
| Product type | Remote Controller Unit / real-time process-control computer |
| Processor | 32-bit PowerPC MPC8245, 400 MHz |
| RAM | 64 MB, 133 MHz |
| Flash memory | 32 MB |
| Operating system | VxWorks real-time operating system |
| Network interfaces | Dual RedNet Ethernet, 100BASE-TX / 1000BASE-T |
| Primary function | Process control and remote I/O bus driving |
| Supply voltage | 24 V DC nominal, +18 to +32 V DC |
| Nominal current consumption | 0.8 A maximum |
| Maximum start-up current | 3.8 A |
| Power consumption | 20 W maximum |
| Heat dissipation | 20 W maximum |
| Power connection | Screw terminals, slotted; 2.5 mm² cable cross-section |
| Dimensions | 355 mm high × 158 mm wide × 87 mm deep |
| Weight | 1.35 kg |
| Hardware description | Real-time single-board computer and remote I/O bus driver |
Engineering Selection Highlights
- The RCU502 is a real-time process-control computer, so it is selected where a Kongsberg automation application requires local control processing and remote I/O bus communication.
- Its 400 MHz PowerPC MPC8245 processor, 64 MB RAM, and 32 MB Flash define the controller’s processing and data-retention resources.
- Dual RedNet Ethernet interfaces support redundant Ethernet configurations, which is relevant for control networks requiring communication-path redundancy.
- The unit runs VxWorks, a real-time operating system, making it suitable for deterministic process-control tasks within Kongsberg system architectures.
- The 24 V DC nominal supply accepts 18–32 V DC, while the 3.8 A maximum start-up current must be considered in power-supply and circuit protection sizing.
- The RCU502 is a 355 × 158 × 87 mm module weighing 1.35 kg, so cabinet space, mounting arrangement, and service access should be planned around these dimensions.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| System role | Kongsberg process-control and remote I/O architecture | The RCU502 functions as a process station controller and remote I/O bus driver. |
| Network redundancy | Dual RedNet Ethernet, 100BASE-TX / 1000BASE-T | The two Ethernet interfaces support redundant network configurations. |
| Operating system | VxWorks | The unit operates as a real-time process-control computer under VxWorks. |
| Supply power | 24 V DC nominal, +18 to +32 V DC | The power supply must support the unit’s 0.8 A nominal and 3.8 A start-up current. |
| Power connection | Screw terminals, 2.5 mm² cable cross-section | Use appropriately sized wiring for the power connection. |
| Application context | Kongsberg K-Gauge CTS transmitter-cabinet installation | The RCU502 is shown as the Remote Controller Unit in the K-Gauge CTS system documentation. |
Dimensions, Mounting & Connection Notes
| Item | Specification |
|---|---|
| Dimensions | 355 mm high × 158 mm wide × 87 mm deep |
| Weight | 1.35 kg |
| Power terminals | Screw terminals, slotted |
| Power cable cross-section | 2.5 mm² |
| Supply voltage | 24 V DC nominal, +18 to +32 V DC |
| Nominal current | 0.8 A maximum |
| Start-up current | 3.8 A maximum |
| Network connection | Dual RedNet Ethernet, 100BASE-TX / 1000BASE-T |

RCU502

RCU502
Detailed Product Overview
The Kongsberg RCU502 is a Remote Controller Unit designed as a high-performance, general-purpose real-time process-control computer. It is used in Kongsberg Maritime system applications in both onshore and offshore installations, where it provides local control processing and remote I/O bus-driving functions.
The module is built around a 32-bit PowerPC MPC8245 host processor operating at 400 MHz. Its memory subsystem includes 64 MB of RAM operating at 133 MHz and 32 MB of Flash memory. The RCU502 runs the VxWorks real-time operating system, supporting deterministic process-control execution within the Kongsberg automation environment.
Networking is provided through dual RedNet Ethernet interfaces supporting 100BASE-TX and 1000BASE-T operation. These interfaces enable redundant Ethernet configurations, allowing the RCU502 to participate in control networks where communication-path redundancy is required.
The unit is powered from a nominal 24 V DC supply and accepts an input range of +18 to +32 V DC. Nominal current consumption is 0.8 A maximum, while the maximum start-up current is 3.8 A. Power consumption and heat dissipation are each specified at 20 W maximum. Power is connected through slotted screw terminals intended for 2.5 mm² cable.
Physically, the RCU502 measures 355 mm high, 158 mm wide, and 87 mm deep, with a weight of 1.35 kg. Its compact single-board-computer format makes it suitable for installation within Kongsberg control cabinets and distributed automation architectures.
Applications & System Role
The RCU502 serves as a distributed processing node in Kongsberg automation architectures. It executes real-time process-control logic, communicates with the system network through dual RedNet Ethernet interfaces, and drives remote I/O communication for connected field equipment.
In the Kongsberg K-Gauge CTS application, the RCU502 is used as the Remote Controller Unit in the transmitter-cabinet installation. More generally, its role is to provide local real-time control processing and remote I/O integration for marine and offshore automation systems.
FAQ
What is the Kongsberg RCU502?
The Kongsberg RCU502 is a Remote Controller Unit and real-time process-control computer used in Kongsberg marine and offshore automation systems.
What processor does the RCU502 use?
It uses a 32-bit PowerPC MPC8245 processor running at 400 MHz.
How much memory does it have?
The RCU502 has 64 MB of RAM and 32 MB of Flash memory.
Which operating system does it run?
It runs the VxWorks real-time operating system.
What network interfaces does it provide?
It provides dual RedNet Ethernet interfaces supporting 100BASE-TX and 1000BASE-T operation.
What power supply does the RCU502 require?
It requires a nominal 24 V DC supply within the +18 to +32 V DC range, with a maximum start-up current of 3.8 A.
What is its power consumption?
The RCU502 has a maximum power consumption and heat dissipation of 20 W.
What are its dimensions and weight?
The unit measures 355 mm × 158 mm × 87 mm and weighs 1.35 kg.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626