Sale!

KONGSBERG RPC420 317114 K-Thrust Remote Panel Controller

The KONGSBERG RPC420, order number 317114, is a panel controller used in the Kongsberg Maritime K-Thrust Remote Control System (RCS). It provides the interface between devices at a control position—levers, lever panels, utility panels, and indicator instruments—and the thruster controller through the Lever Communication Link (LCL).

Categories: , , , , SKU: RPC420 317114 Brand:

Description

Core Product Summary

The KONGSBERG RPC420, order number 317114, is a panel controller used in the Kongsberg Maritime K-Thrust Remote Control System (RCS). It provides the interface between devices at a control position—levers, lever panels, utility panels, and indicator instruments—and the thruster controller through the Lever Communication Link (LCL).

The RPC420 accepts a 24 VDC supply and communicates with remote control units through two galvanically isolated serial process-bus interfaces, RBUS A and RBUS B, supporting redundant communication. Its plug-in connections, address switch, and front status LED support installation, module addressing, and operating-status identification in a bridge or engine-control-room control position.

 

Key Technical Specifications

Parameter Specification
Manufacturer Kongsberg Maritime
Model RPC420
Order number 317114
Product type Remote panel controller
System family K-Thrust Remote Control System (RCS)
Supply voltage 24 VDC
Current consumption 1.1 A at 18 VDC
Power consumption 20 W
Process-bus interfaces RBUS A and RBUS B, serial
Communication redundancy Two RBUS interfaces for redundant communication to RCU(s)
Isolation Galvanically isolated RBUS interfaces
Panel power output 24 VDC supply for lever panel
Operating temperature -15 °C to 70 °C
Storage temperature -25 °C to 70 °C
Operating humidity 96% RH, non-condensing
Storage humidity 96% RH, non-condensing
Dimensions 5 mm H × 130 mm W × 180 mm D
Weight 0.60 kg
Address setting Two-digit address switch
Status indication Front status LED showing running or offline

 

Engineering Selection Highlights

  • The RPC420 is the panel controller for a K-Thrust RCS control position, so it is selected where manual levers and associated panels must communicate with the thruster controller.
  • Its two RBUS interfaces provide redundant communication paths to the remote control units, making it relevant where the control architecture uses RBUS A and RBUS B.
  • The 24 VDC input and 20 W power consumption define the power-supply requirement for the controller itself.
  • The controller supplies 24 VDC to the lever panel, which draws up to 250 mA and 6 W; this affects panel power budgeting.
  • Plug-in connections support replacement of the module without rewiring the associated panel connections.
  • The two-digit address switch allows the module address to be set during installation or replacement.
  • Its 130 mm width, 180 mm depth, and 5 mm height indicate a compact PCB/module format rather than a standalone console-mounted operator panel.
RPC420 317114

RPC420 317114

RPC420 317114

RPC420 317114

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Control system Kongsberg Maritime K-Thrust Remote Control System The RPC420 is specified as the panel controller for each manual lever in this system.
Control-position devices Levers, lever panels, utility panel, and indicator instruments The RPC420 interfaces these devices within the control position.
Thruster controller Lever Communication Link (LCL) The RPC420 provides the interface from the control position to the thruster controller.
Remote control units RCU(s) via RBUS A and RBUS B Two serial process-bus interfaces support redundant communication.
Lever panel Kongsberg lever panel, article number 316986 The RPC420 supplies 24 VDC to the lever panel.
Utility panel Kongsberg utility panel, article number 316987 The utility panel is part of the same K-Thrust control-position architecture.
Power supply 24 VDC input The controller requires a 24 VDC supply and supports a redundant-power-supply connection.
Module addressing Two-digit address switch Set the module address during installation or replacement.

 

Dimensions, Mounting & Connection Notes

Item Verified data
Height 5 mm
Width 130 mm
Depth 180 mm
Weight 0.60 kg
Connections Plug-in connections
Address setting Two-digit address switch
Status indication Front-mounted status LED
Operating temperature -15 °C to 70 °C
Operating humidity 96% RH, non-condensing
Applicable standards EN 60945 and IACS E10

The RPC420 is a compact controller module with plug-in connections rather than a flush-mounted operator console. Its low profile and 130 × 180 mm footprint are consistent with installation behind or within a control-position panel assembly.

 

Detailed Product Overview

The KONGSBERG RPC420 317114 is the panel-controller element of a K-Thrust Remote Control System control position. K-Thrust control positions may be located on the bridge or in the engine control room and are used to control thrusters, propulsion units, and rudders through manual levers and associated panels.

At a control position, the RPC420 interfaces the operator-facing hardware: the lever or levers, the lever panel, the utility panel, and indicator instruments. The lever panel provides configurable function buttons, status lamps, and an emergency-stop button, while the utility panel provides mode-selection buttons, command-transfer functions, alarm silence, lamp test, and panel dimming. The RPC420 therefore consolidates these panel signals and presents them to the thruster controller through the LCL.

For communication to the remote control units, the module provides two serial RBUS interfaces. These interfaces are galvanically isolated and are designated RBUS A and RBUS B, enabling redundant communication between the control-position panel equipment and the RCU(s). The module also includes a connection for redundant power supply, allowing the power arrangement to match the redundant communication architecture.

The RPC420 includes practical service and commissioning features. Its plug-in connections are intended to permit fast replacement, while the two-digit address switch sets the module address. A front status LED indicates whether the controller is running or offline. The module also provides interfaces for LEDs, buttons, meters, panel backlighting, lamp dimming, lamp test, and audible alarms, including three internal buzzers and an HSD output for an external buzzer.

Electrically, the controller operates from 24 VDC and is specified for 1.1 A current consumption at 18 VDC and 20 W power consumption. It supplies 24 VDC to the associated lever panel, which is specified for a maximum current draw of 250 mA and maximum power consumption of 6 W. The controller is rated for operation from -15 °C to 70 °C and for non-condensing humidity up to 96% RH.

The K-Thrust documentation applies EN 60945 and IACS E10 to the system’s levers, lever panel, and utility panel. The lever panel and utility panel are described as designed for DNV and ABS type approval. Those approval statements are associated with the panel products in the documented system scope; the RPC420 itself is identified in that documentation by order number 317114.

 

Applications & System Role

Within a K-Thrust RCS control position, the RPC420 acts as the local panel controller. It collects operator inputs and status signals from manual levers, lever panels, utility panels, and indicator instruments, then communicates those signals to the thruster controller through the LCL.

It also provides panel-related functions, including interfaces for LEDs, buttons, meters, panel backlighting, lamp dimming, and lamp test. Three internal buzzers and an HSD output for an external buzzer support audible indication at the control position.

The redundant RBUS A and RBUS B links connect the panel controller to the remote control units. This makes the RPC420 the integration point between the operator-interface hardware at a bridge or engine-control-room position and the vessel’s thruster-control processing equipment.

 

FAQ

What is the KONGSBERG RPC420 317114?
It is a Kongsberg Maritime RPC420 remote panel controller, identified by order number 317114, used in the K-Thrust Remote Control System.

What does the RPC420 do?
It interfaces levers, lever panels, utility panels, and indicator instruments at a control position with the thruster controller through the Lever Communication Link.

Which system uses the RPC420?
It belongs to the Kongsberg Maritime K-Thrust Remote Control System, which is used for control positions operating thrusters, propulsion units, and rudders.

How does the RPC420 communicate with remote control units?
It uses two serial process-bus interfaces, RBUS A and RBUS B, which are galvanically isolated and support redundant communication to the RCU(s).

What power supply does the RPC420 require?
It requires a 24 VDC supply, with specified current consumption of 1.1 A at 18 VDC and power consumption of 20 W.

Does the RPC420 supply power to the lever panel?
Yes. The associated lever panel receives 24 VDC from the RPC420 and is specified for a maximum current of 250 mA and maximum power of 6 W.

How is the module addressed?
The RPC420 has a two-digit address switch for setting its module address.

What are the module’s physical dimensions?
The RPC420 measures 5 mm high, 130 mm wide, and 180 mm deep, and weighs 0.60 kg.