Description
Core Product Summary (Brand / Model / Key Attributes)
The KUKA 00-113-406 is an original cooling fan assembly designed specifically for KUKA KR C2 industrial robot controller cabinets. Functioning as an integral thermal management component, this assembly helps maintain optimal operating temperatures for internal control electronics, power supplies, and processor units by driving forced-air circulation through the enclosure.
The unit typically arrives pre-mounted with its dedicated sheet metal bracket or housing holder for direct installation inside the controller cabinet. Built to industrial specifications, it operates reliably under continuous factory floor conditions, preventing localized heat buildup that can affect sensitive control hardware.
Key Technical Specifications
| Parameter | Verified Specification |
| Manufacturer / Brand | KUKA |
| Model / Part Number | 00-113-406 |
| Product Type | Control Cabinet Cooling Fan Assembly (Inner / Outer Fan) |
| System Compatibility | KUKA KR C2 Controller Series |
| Included Hardware | Integrated mounting bracket / sheet metal holder |
| Application | Industrial robot controller thermal management and forced-air ventilation |
Detailed Product Overview
Enclosed industrial robot controllers like the KUKA KR C2 generate substantial thermal energy from high-density computer boards, drive electronics, and power supplies. To prevent overheating and subsequent thermal trips or hardware degradation, the cooling architecture relies on reliable internal and external air movement components. The KUKA 00-113-406 fan assembly is engineered to fit directly into designated airflow channels within the KR C2 cabinet structure.
The assembly is supplied as a ready-to-install unit complete with its mechanical mounting bracket, reducing downtime during maintenance or preventative replacement cycles. Ensuring proper operation of this ventilation path helps preserve the lifespan of sensitive electronic sub-assemblies inside the control rack.

00-113-406

00-113-406
Engineering Selection Highlights
- KR C2 Controller Compatibility: Designed specifically for the KUKA KR C2 control cabinet architecture → Confirm the mounting location and connection interface match your specific controller sub-rack (inner vs. outer fan position).
- Pre-Mounted Bracket Design: Delivered with an integrated sheet-metal holder → Allows direct mechanical swapping without needing to disassemble custom mounting hardware.
- Thermal Maintenance: Critical for preventing heat-related faults in high-density controller racks → Replace proactively during scheduled maintenance intervals if bearing noise or diminished airflow is detected.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| Controller Series | KUKA KR C2 Cabinet | Built exclusively for integration within standard KR C2 controller ventilation layouts. |
| Power Connection | Standard controller internal fan power harness | Ensure the power connector is securely latched and matches the voltage output of the controller fan header. |
| Mounting Orientation | Cabinet internal duct or panel brackets | Pay attention to airflow direction arrows stamped on the fan housing to ensure proper intake/exhaust orientation. |
Dimensions, Mounting & Connection Notes
- Physical Configuration: Axial fan unit packaged with a custom sheet-metal mounting bracket/holder.
- Installation Precautions: Power down and isolate the KR C2 controller completely via main disconnect before servicing cabinet fans. Ensure fingers and loose wiring are kept clear of the rotating impeller blades.
- Airflow Verification: After replacement, power up the system and verify that the fan spins freely without obstruction and that air flows cleanly through the cabinet vents.
FAQ
What is the KUKA 00-113-406?It is a replacement cooling fan assembly equipped with a mounting bracket, used for thermal management in industrial robot controller cabinets.
Which robot control systems use part number 00-113-406?This fan unit is utilized within the KUKA KR C2 controller series.
Does the assembly include the mounting hardware?Yes, it is typically supplied with an integrated sheet metal holder for straightforward installation into the cabinet.
What are the primary symptoms of a failing fan unit? Common indicators include increased acoustic noise, bearing squeal, reduced airflow, or controller thermal warning messages on the smartPAD / KUKA control panel.
Verification & Troubleshooting Notes
- Airflow Obstruction Check: If the controller triggers high-temperature alarms, inspect the fan intake filters and the 00-113-406 fan blades for dust accumulation or foreign debris blocking rotation.
- Electrical Connection Test: Verify with a multimeter that operational voltage is reaching the fan connector terminals if the unit fails to spin upon controller startup.
- Safe Replacement Protocol: Always observe standard electrical safety procedures and let high-voltage components discharge fully inside the controller enclosure before handling internal cooling parts.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626