Description
Core Product Summary
The LTi Drives PM-E40.2DRA054P is a pitch-control inverter in the LTi Drives PM-E40 series. It is used in a wind turbine pitch system to supply and control the motor that adjusts a rotor blade’s pitch angle, allowing the turbine controller to regulate aerodynamic load and rotor behavior.
This exact unit is identified with firmware FW 130.00-10. In a pitch application, the inverter operates as part of the turbine’s blade-control architecture: it receives commands from the turbine control system, drives the pitch motor, and supports the coordinated blade-angle changes required during normal operation and protective feathering.
Key Technical Specifications
| Item | Verified Information |
|---|---|
| Manufacturer / product family | LTi Drives, PM-E40 series |
| Exact model | PM-E40.2DRA054P |
| Product type | Wind turbine pitch-control inverter |
| Primary function | Controls the motor used for wind turbine blade pitch adjustment |
| Firmware identification | FW 130.00-10 |
| Application context | Wind turbine blade pitch control |
Engineering Selection Highlights
- Exact model identification: PM-E40.2DRA054P is a specific LTi Drives PM-E40-series pitch inverter, so replacement sourcing should match the complete order designation rather than relying on the series name alone.
- Pitch-system role: The unit drives the motor that changes blade pitch, making its control behavior and configuration relevant to turbine pitch performance and protective blade feathering.
- Firmware dependency: The identified firmware, FW 130.00-10, should be recorded during replacement or configuration work because firmware can affect available functions, communication behavior, and fault response.
- System integration requirement: The inverter must be integrated with the turbine controller and the wider pitch-control architecture, including correct command, feedback, and diagnostic configuration.
- Configuration preservation: Motor data, current limits, communication settings, and fault-reaction settings should be documented before removal or replacement so the drive can be returned to its intended operating state.

PM-E40.2DRA054P

PM-E40.2DRA054P
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Control architecture | Wind turbine pitch-control system | The inverter works with the turbine controller to command and monitor blade pitch movement. |
| Driven load | Pitch motor | The inverter supplies and controls the motor that rotates the blade to change pitch angle. |
| Firmware | FW 130.00-10 | Confirm the installed firmware when integrating, configuring, or replacing the unit. |
| Associated systems | Turbine controller, safety system, and other pitch drives | Pitch operation requires coordination across the turbine control and safety architecture. |
Detailed Product Overview
The LTi Drives PM-E40.2DRA054P is an application-specific inverter for wind turbine pitch control. Rather than serving as a general-purpose motion drive, it is positioned within the turbine’s blade-pitch architecture, where it drives the motor responsible for changing a blade’s angular position relative to the wind.
Pitch angle directly affects the aerodynamic force acting on the rotor. By adjusting that angle, the turbine control system can influence power capture during normal operation and reduce rotor loading during high-wind or fault conditions. The PM-E40.2DRA054P performs the local power-conversion and motor-control function in that chain: it receives commands from the turbine control system, operates the pitch motor, and participates in the exchange of status and diagnostic information required for coordinated pitch operation.
The identified firmware version, FW 130.00-10, is a practical selection and maintenance reference. Firmware can determine the functions available in the drive, its communication behavior, and the way it responds to faults. For procurement or service planning, the complete model designation and installed firmware should be treated as part of the unit’s configuration identity.
Integration depends on the surrounding turbine design. The inverter must be configured for the associated pitch motor, communication addressing, current limits, and fault reactions. Because pitch control is coordinated with the turbine controller, safety system, and the pitch drives on the other blades, replacement or recommissioning should preserve the original parameter set and confirm that command, feedback, and diagnostic paths operate as designed.
The PM-E40.2DRA054P is therefore best evaluated as a model-specific pitch inverter: its suitability depends not only on physical fit, but also on matching the turbine’s control configuration, motor data, communication setup, and firmware-related behavior.
Applications & System Role
The PM-E40.2DRA054P sits in the pitch-control portion of a wind turbine drive system. Its role is to convert control commands into motor operation that rotates a blade about its longitudinal axis, changing the angle at which wind acts on the blade.
In normal operation, pitch adjustment helps the turbine control aerodynamic torque and power production. When high wind or a fault condition requires the blades to move toward the feathered position, the pitch drive is part of the mechanism that reduces aerodynamic loading on the rotor. Because each blade commonly has an independent pitch drive, the inverter’s configuration and diagnostics are important to the coordinated operation of the complete pitch system.
FAQ
What is the LTi Drives PM-E40.2DRA054P?
It is an LTi Drives PM-E40-series inverter used for wind turbine blade pitch control.
What does the PM-E40.2DRA054P do?
It drives the pitch motor that adjusts a wind turbine blade’s pitch angle, supporting normal power-control operation and blade feathering when required.
Which system family does it belong to?
It belongs to the LTi Drives PM-E40 series.
What firmware is associated with this exact unit?
The unit is identified with firmware FW 130.00-10.
Why is the firmware version important?
Firmware can affect available functions, communication behavior, and fault response, so it should be recorded when configuring or replacing the inverter.
Where is this inverter used?
It is used in a wind turbine pitch-control system, where it forms part of the drive chain for blade-angle adjustment.
What should be documented before replacing the unit?
Motor data, current limits, communication settings, fault reactions, and the installed firmware version should be preserved to restore the intended operating configuration.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626