Sale!

Masoneilan SVI2-21123121 SVI II AP Digital Valve Positioner

The Masoneilan SVI2-21123121 is a digital valve positioner from the SVI II AP (Smart Valve Interface II Advanced Performance) series. It is a microprocessor-based instrument that positions a pneumatic actuator according to a two-wire 4-20 mA control signal and supports bi-directional HART communication.

Categories: , , , , SKU: SVI2-21123121 Brand:

Description

Core Product Summary

The Masoneilan SVI2-21123121 is a digital valve positioner from the SVI II AP (Smart Valve Interface II Advanced Performance) series. It is a microprocessor-based instrument that positions a pneumatic actuator according to a two-wire 4-20 mA control signal and supports bi-directional HART communication.

The device employs non-contact position sensing and a universal design that fits both single-acting and double-acting pneumatic actuators, whether linear or rotary. It is intended for precise valve control, local or remote configuration, and diagnostic monitoring in process applications.

Key Technical Specifications

Parameter Value / Description
Manufacturer Masoneilan (Baker Hughes)
Series SVI II AP (Smart Valve Interface II Advanced Performance)
Product type Digital valve positioner
Input signal 4-20 mA with HART protocol
Power Loop-powered from 4-20 mA signal
Position sensing Non-contact
Actuator compatibility Single-acting or double-acting; linear or rotary
Supply pressure (single-acting) 20 to 100 psi (1.4 to 6.9 bar)
Operating temperature –50 °C to +85 °C
Enclosure IP66 / NEMA 4X
Housing material Copper-free aluminum
Communication HART

Engineering Selection Highlights

  • Non-contact position sensing eliminates mechanical linkage wear inside the housing and simplifies mounting.
  • Universal mechanical interface supports retrofit on both Masoneilan and non-Masoneilan pneumatic actuators (single- or double-acting, linear or rotary).
  • Loop-powered 4-20 mA operation with HART enables configuration, monitoring and diagnostics over existing wiring.
  • Operating temperature range of –50 °C to +85 °C covers a wide range of process environments.
  • IP66 / NEMA 4X copper-free aluminum housing provides environmental protection suitable for outdoor and corrosive locations.
  • Local interface options (LCD and push-buttons on applicable configurations) allow on-site calibration and setup without additional tools.

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Control signal 4-20 mA two-wire with HART Loop-powered; minimum terminal voltage and current per datasheet
Actuator type Single- or double-acting pneumatic Linear or rotary motion supported
Mounting Universal / NAMUR-compatible kits Suitable for retrofit of existing analog positioners
Air supply Regulated and filtered air (or sweet natural gas) Supply pressure limited by action type
Communication HART protocol Compatible with HART handhelds, asset-management systems and DTM software
Enclosure IP66 / NEMA 4X Outdoor and industrial environments

Dimensions, Mounting & Connection Notes

The SVI II AP series uses a sealed copper-free aluminum housing with no shaft penetration into the electronics cavity. Mounting is accomplished with standard kits for linear or rotary actuators; NAMUR mounting is available for quarter-turn valves. Pneumatic connections are typically ¼ NPT or equivalent. Exact outline dimensions, port locations and mounting-kit part numbers for the SVI2-21123121 configuration are given in the official Masoneilan installation documentation.

Detailed Product Overview

The Masoneilan SVI2-21123121 belongs to the SVI II AP family of advanced-performance digital valve positioners. A 32-bit microprocessor continuously compares the 4-20 mA position setpoint with feedback from a non-contact position sensor. The resulting error signal drives an electro-pneumatic converter that supplies or exhausts air to the actuator until the desired valve position is reached.

Non-contact sensing is performed through the housing wall, so no mechanical linkage enters the electronics compartment. This construction reduces wear, improves resistance to vibration and contamination, and simplifies mechanical mounting. The same hardware platform supports both linear and rotary actuators in single-acting or double-acting configurations, enabling a single positioner model to cover a broad range of valve types.

Power is taken directly from the 4-20 mA loop. HART communication provides remote access to configuration parameters, real-time process and diagnostic data, and calibration routines. Optional local LCD and push-buttons (when fitted) allow on-site setup and tuning without a communicator. The sealed IP66 / NEMA 4X copper-free aluminum enclosure is suitable for outdoor, marine and corrosive industrial environments within the specified temperature range of –50 °C to +85 °C.

Because the exact pneumatic capacity, option boards and hazardous-area certification markings depend on the full order code, the official Baker Hughes / Masoneilan datasheet and installation manual for SVI2-21123121 should be consulted for final design values and certification details.

SVI2-21123121

SVI2-21123121

SVI2-21123121

SVI2-21123121

Applications & System Role

The SVI2-21123121 functions as the intelligent interface between a process control system and a pneumatic valve actuator. It receives a 4-20 mA setpoint, compares it with measured stem or shaft position, and modulates the pneumatic output to achieve accurate valve positioning.

It is used on control valves in continuous and batch process applications where digital diagnostics, HART communication and reliable positioning under varying process conditions are required. The universal design allows both new installations and retrofit of existing analog positioners.

FAQ

What is the Masoneilan SVI2-21123121?
It is a digital valve positioner from the SVI II AP (Advanced Performance) series that controls pneumatic actuators using a 4-20 mA HART signal.

What actuators can the SVI2-21123121 control?
It is designed for both single-acting and double-acting pneumatic actuators in linear or rotary configurations.

How does the positioner sense valve position?
It uses non-contact position sensing technology that does not require a mechanical shaft entering the electronics housing.

What communication protocol does it use?
HART protocol over the 4-20 mA control signal for bi-directional communication.

What is the operating temperature range?
–50 °C to +85 °C.

Is the SVI2-21123121 suitable for outdoor installation?
Yes. The enclosure is rated IP66 / NEMA 4X and uses a copper-free aluminum housing.