Description
Core Product Summary (Brand / Model / Key Attributes)
The Metso A413240 (also designated as PIC2 or PIC-2) is a Processor Interface Card manufactured by Metso Automation (Valmet) for use within Valmet Damatic and Metso DNA distributed control system (DCS) architectures. Functioning as an internal printed circuit board assembly, the PIC2 serves as a communication interface between the system processor and connected I/O subsystems.
Physical and hardware markings associated with the Metso A413240 assembly include the PIC2 module identifier, PCB board code 65425667A (with related board markings 65425667B and MA65490070B documented on physical units), and hardware revision suffixes such as A413240A. The unit is constructed as an unenclosed green printed circuit board module with onboard integrated circuits and multi-pin connectors for direct installation into compatible DCS hardware assemblies.
Key Technical Specifications
| Parameter | Verified Specification |
| Manufacturer / Brand | Metso Automation / Valmet |
| Model / Order Number | A413240 (variant suffix A413240A documented) |
| Module Designation | PIC2 / PIC-2 (Processor Interface Card) |
| Product Type | Printed Circuit Board (PCB) Module Assembly |
| Associated System Platform | Valmet Damatic / Metso DNA Distributed Control Systems |
| Primary Function | Communication bridge between system processor and I/O subsystems |
| Associated PCB / Marking Codes | 65425667A, 65425667B, MA65490070B, S426198 |
| Approximate Weight | 0.145 kg to 0.16 kg (0.35 lbs) |
| Country of Manufacture | Finland |
Detailed Product Overview
In a Valmet Damatic or Metso DNA distributed control environment, deterministic data exchange between central processing units and field-level input/output cabinets is required for continuous process control. The Metso A413240 PIC2 Processor Interface Card performs this bridging role at the board level, linking the system processor layer to I/O subsystems so control commands and process signals move reliably across the cabinet architecture.
Because the A413240 is supplied as an open-frame printed circuit board assembly rather than a standalone DIN-rail housing, it is engineered for direct integration inside dedicated Metso/Valmet control hardware enclosures and I/O cabinet racks. Boards are manufactured in Finland and carry multiple factory identification markings on the silkscreen and labels, including the primary order code (A413240 or A413240A), the functional module name (PIC2), and bare-board or assembly part numbers (65425667A, 65425667B, or MA65490070B).
For maintenance and spare-parts procurement teams, verifying the exact revision suffix is an important step before installation. Units in the field appear with both the base order number and the A413240A variant, alongside specific firmware or hardware version numbers printed on the board label (such as Rev. 07, Ver. 08, or Ver. 21). Matching both the base part number and the revision level helps maintain consistency with existing Damatic or Metso DNA node hardware.

A413240
Engineering Selection Highlights
- Exact System Architecture Match: The A413240 PIC2 is built specifically for Valmet Damatic and Metso DNA DCS hardware → Confirm the host cabinet belongs to the compatible Damatic/Metso DNA platform before ordering, as board-level interface cards are not interchangeable with third-party PLC racks.
- Base Number vs. Revision Suffix (
vs.A413240A): Physical boards are marked with eitherorA413240Aalong with version indicators → Inspect the label on the existing card being replaced to match the exact order suffix and hardware/firmware revision required by the host node. - Cross-Reference PCB Markings: Assemblies carry secondary printed circuit board codes such as
65425667A,65425667B, andMA65490070B→ Use these secondary numbers to verify physical board identity when the primary paper label is worn or partially obscured. - Open-Frame PCB Form Factor: Delivered as an unenclosed circuit board module weighing approximately 145–160 g → Requires electrostatic discharge (ESD) precautions during handling and installation into the designated host slot or carrier assembly.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| Control System Platform | Valmet Damatic / Metso DNA DCS | Designed for integration within Metso Automation / Valmet distributed control architectures. |
| Functional Role | Processor-to-I/O Subsystem Interface | Operates between the system processor and I/O cabinet subsystems rather than terminating field sensor wiring directly. |
| Hardware Variants | and (with version suffixes) |
Verify revision compatibility with the target processor unit and system software level prior to installation. |
| Physical Form Factor | Internal PCB Module Assembly | Installs inside dedicated host hardware enclosures via onboard multi-pin connectors. |
Dimensions, Mounting & Connection Notes
- Weight: Approximately 0.145 kg to 0.16 kg (0.35 lbs).
- Physical Construction: Open-frame green printed circuit board assembly featuring surface-mount and through-hole integrated circuits, onboard multi-pin header connectors, and dedicated mounting holes.
- Handling & Installation: Because exposed conductive traces and integrated circuits are present across the board surface, standard ESD-safe handling procedures and power-down isolation of the host cabinet should be observed during removal or installation.
FAQ
What is the Metso A413240?The Metso A413240 is a PIC2 (Processor Interface Card) printed circuit board assembly manufactured by Metso Automation (Valmet) for industrial distributed control systems.
Which control system does the Metso A413240 belong to? It is used in Valmet Damatic and Metso DNA distributed control system (DCS) architectures.
What function does the PIC2 card perform? The PIC2 acts as a communication interface between the system processor and I/O subsystems, handling data exchange between the controller layer and connected I/O hardware.
What other part numbers appear on the Metso A413240 board?In addition to and , physical boards commonly display the variant code as well as PCB and assembly identifiers including 65425667A, 65425667B, and MA65490070B.
Where is the Metso A413240 manufactured?Units are marked as manufactured in Finland.
Verification & Troubleshooting Notes
- Physical & Revision Verification: Before installing a spare A413240 card, confirm that the model number (
vs.), module marking (), and firmware/hardware version label match the unit specified in your system documentation. - Connector & Board Inspection: Visually inspect the board edges, onboard connectors, and solder joints for bent pins, physical damage, or contamination prior to seating the module into the host assembly.
- Safe Replacement Practices: De-energize the host rack or follow the site’s approved Metso DNA / Damatic maintenance procedure before removing or seating internal PCB assemblies to prevent electrical damage or unintended process upsets.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626