Description
Key Technical Specifications
| Parameter | Value |
| Amplifier Series | MR-S Multi-Axis Servo System |
| Power Capacity Class | 200 W |
| Control Power Supply | 24 VDC / Internal bus power |
| Main Circuit Input | Multi-axis common power supply rail integration |
| Control Architecture | Sinusoidal PWM / Current control system |
| Encoder Interface | High-resolution serial/incremental encoder feedback |
| Operating Temperature | 0 to +55^\circC |
| Storage Temperature | -20 to +85^\circC |
| Enclosure Protection | IP00 (Panel-mounted chassis design) |
| Compliance Standards | CE, UL, cUL |
Product Introduction & Supply Chain Strategy
The Mitsubishi MR-S11-200-Z37 is a precision AC servo amplifier engineered for integration within Mitsubishi’s MR-S multi-axis motion control architectures. It delivers high-bandwidth current loops and rapid velocity positioning for automated manufacturing systems, robotics, and high-speed transfer machinery.
Procuring this legacy drive as a Brand New Surplus asset shields plant operations from unexpected hardware failures and obsolete supply chain bottlenecks. Sourcing genuine, factory-fresh electronics eliminates the latent electrolytic capacitor dry-out, power transistor fatigue, and solder micro-cracks inherent in used or repaired units, protecting Total Cost of Ownership (TCO) and securing long-term line reliability.
Installation & Configuration Guide
- Stage 1: Pre-Installation (Prep & Safety): Enforce complete lock-out/tag-out (LOTO) protocols on incoming 3-phase and DC bus power rails. Allow adequate capacitor discharge time. Put on an ESD grounding wrist strap. Inspect cabinet heat sinks and ensure proper cooling clearance spacing around the drive chassis.
- Stage 2: Removal: Disconnect plug-in control terminal blocks, motor power leads, encoder feedback cables, and common bus connectors from the legacy amplifier. Loosen mounting screws and extract the unit from the backpanel.
- Stage 3: Installation (Clone & Seat): Verify that any front-panel parameter settings, rotary switches, or jumper configurations on the replacement MR-S11-200-Z37 unit precisely mirror the legacy drive. Mount the amplifier securely onto the panel backplate. Reconnect power, ground shielding, encoder lines, and communication cables with proper strain relief.
- Stage 4: Power-On & Testing: Energize control power (24 VDC) first to verify communication handshakes and parameter registers. Apply main circuit high-voltage power, execute low-speed axis jog commands, and monitor drive status display LEDs for normal operation.

MR-S11-200-Z37

MR-S11-200-Z37
Firmware/Software Versions & Upgrade Notes
- Recommended Baseline: Match the system controller and servo setup software version to the baseline qualified for the MR-S series drive family.
- Compatibility Notes: Ensure motion controller parameters, electronic gear ratios, and gain tuning files match the replacement amplifier specification upon insertion to prevent command tracking errors.
- Upgrade Warning: Avoid simultaneous hardware swaps and major control software modifications during active production runs. Complete physical module installation first, verify basic axis movement, and schedule parameter optimization during planned maintenance windows.
Frequently Asked Questions (FAQ)
- Are these servo amplifiers truly new or refurbished?
This unit is a Brand New Surplus part, preserved in factory-original packaging, completely unused, and never installed or repaired.
- Why choose New Surplus over a cheaper refurbished unit?
Refurbished power electronics frequently feature aged electrolytic capacitors and heat-stressed insulated-gate bipolar transistors (IGBTs). Saving minimal capital on a used drive invites catastrophic short-circuit failures and unplanned production outages.
- What is the strategic inventory plan for this module?
Because mature multi-axis drives face restricted component availability, keeping 1 unit of buffer stock on-site serves as an essential insurance policy for critical automation cells.
- Do I need to transfer parameter settings when replacing this drive?
Yes, verify that all tuning gains, electronic gear settings, and axis limit parameters are correctly configured or downloaded to match the machine mechanical profile before enabling motion.
- What warranty terms are included?
Every New Surplus MR-S11-200-Z37 unit is backed by a comprehensive 1-to-2 year operational warranty, ensuring absolute reliability for mission-critical industrial automation systems.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626