Sale!

MKS T3BIB-29916 T3B High-Speed Exhaust Throttle Valve

The MKS T3BIB-29916 is a high-speed exhaust throttle valve from the T3B series (RoHS-compliant T3BIB version). It is designed for downstream pressure control applications in vacuum systems.

Categories: , , , , SKU: T3BIB-29916 Brand:

Description

Core Product Summary

The MKS T3BIB-29916 is a high-speed exhaust throttle valve from the T3B series (RoHS-compliant T3BIB version). It is designed for downstream pressure control applications in vacuum systems.

The valve integrates the control electronics, communication interface, driver circuits and motor into a single assembly. This eliminates the need for a separate pressure controller module. A self-tuning digital control algorithm drives the valve to setpoint rapidly with minimum overshoot, supporting repeatable process recipes.

Key Technical Specifications

Parameter Value / Description
Manufacturer MKS Instruments
Series T3B / T3BIB (RoHS version)
Product type High-speed exhaust throttle valve with integrated electronics
Control type Downstream pressure or position control
Control algorithm Self-tuning digital
Accuracy 0.25 % of setpoint or 5 mV (whichever is greater)
Control range 0.0001 % to 100 % full scale (with dual transducer input)
Operating temperature (electronics) 0 to 40 °C
Valve body temperature 0 to 105 °C (standard); up to 150 °C (optional)
Storage temperature –20 to 80 °C
Valve speed High-speed direct drive: < 0.2 s (≤ 4 inch sizes); standard geared: < 0.5–1.0 s
Power Valve: 24 VDC; communication interface dependent

Engineering Selection Highlights

  • Fully integrated electronics remove the requirement for a separate pressure control module, simplifying system layout and cabling.
  • Self-tuning control algorithm provides fast response to setpoint with minimum overshoot and supports consistent process recipes.
  • High-speed direct-drive versions reach position in less than 0.2 seconds on sizes of 4 inches and smaller.
  • Available in multiple flange sizes (KF25 to NW100), sealing styles (non-sealing direct drive or low-conductance F-seal), and shaft seal materials (Viton, Chemraz, Kalrez).
  • Supports analog, RS-232 or DeviceNet interfaces depending on configuration.
  • Suitable for continuous pressure control in semiconductor, thin-film and vacuum process tools.

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Pressure feedback MKS Baratron or compatible dual-channel analog input Nominally ±10 V, ±5 V or ±1 V selectable
Control interface Analog/TTL, RS-232 or DeviceNet (configuration dependent) Integrated driver and communication circuits
Power supply 24 VDC for valve; communication power per interface DeviceNet versions typically 11–25 VDC
Vacuum flange KF or NW style matching ordered bore size Available from KF25 to NW100
Process environment Valve body up to 105 °C standard (150 °C optional) Electronics limited to 0–40 °C
Seal materials Viton, Chemraz or Kalrez options Selected according to process gas compatibility

Dimensions, Mounting & Connection Notes

The T3BIB series valves are compact assemblies with the electronics housing mounted directly on the motor plate of the throttle body. Flange size and bore diameter determine overall envelope and conductance. Electrical connections use standard industrial connectors appropriate to the chosen interface (15-pin D-sub for analog versions, DeviceNet or RS-232 connectors for digital versions). Exact mechanical drawings, port orientations and connector pin-outs for the T3BIB-29916 configuration are provided in the official MKS installation documentation.

T3BIB-29916

T3BIB-29916

T3BIB-29916

T3BIB-29916

Detailed Product Overview

The MKS T3BIB-29916 belongs to the T3B family of high-speed exhaust throttle valves. The T3BIB designation indicates the RoHS-compliant version of the series. All control, communication and motor-driver electronics are contained within the valve assembly itself, so the unit can be installed as a single component on the process chamber exhaust line.

A digital control algorithm continuously compares the pressure (or position) setpoint with the measured feedback signal and drives the throttle plate to the required conductance. The algorithm is self-tuning, enabling rapid settling with minimal overshoot. High-speed direct-drive versions of the valve reach the commanded position in less than 0.2 seconds on sizes of 4 inches and smaller; geared versions are used on larger sizes or when higher torque is required.

The valve body is available with either a non-sealing direct-drive plate or a low-conductance F-seal design. Shaft seals can be specified in Viton, Chemraz or Kalrez compounds to match process chemistry. Standard heatability is 105 °C; an optional 150 °C version is available for higher-temperature applications. Electronics remain limited to an ambient range of 0–40 °C.

Interface options include analog/TTL, RS-232 and DeviceNet. Analog versions accept dual-channel pressure inputs and provide discrete alarm outputs. Digital interfaces support remote configuration, diagnostics and setpoint control. When power is removed, calibration constants and the last valve position are retained in non-volatile memory.

Because the exact flange size, seal type, heatability rating and communication interface are encoded in the full model number, the official MKS datasheet and ordering guide for the T3BIB-29916 should be consulted to confirm the precise configuration before system design.

Applications & System Role

The T3BIB-29916 functions as an integrated downstream pressure control element. It modulates conductance in the exhaust line of a vacuum chamber to maintain a commanded pressure or valve position.

Typical applications include:

  • Semiconductor process tools (CVD, etch, RTP, load-lock pressure control)
  • Thin-film deposition and display manufacturing
  • Solar and related vacuum process equipment
  • Any vacuum system requiring fast, accurate downstream pressure regulation without a separate controller chassis

The self-contained design is particularly useful where panel space is limited or where a simple, reliable pressure control loop is required.

FAQ

What is the MKS -29916?
It is a high-speed exhaust throttle valve from the T3B series with fully integrated control electronics for downstream pressure regulation.

Does the T3BIB-29916 require a separate controller?
No. Control, communication and driver circuits are built into the valve assembly.

What control method does it use?
A self-tuning digital algorithm that provides pressure or position control with fast response and minimum overshoot.

What are the typical applications?
Downstream pressure control on semiconductor process tools, thin-film systems, load locks and other vacuum equipment.

What temperature ratings are available?
Valve body standard up to 105 °C; optional version up to 150 °C. Electronics are rated 0–40 °C.

Which interfaces are supported?
Depending on configuration: Analog/TTL, RS-232 or DeviceNet.