Description
Core Product Summary
The Molex SST-PB3-PCU-2-B is a dual-channel PROFIBUS DP network interface card for universal PCI slots. It belongs to the SST PB3 series and enables a host PC to operate as a PROFIBUS DPV0 master, DPV0 slave, or DPV1 master on industrial fieldbus networks.
The card supports data rates from 9.6 kbps to 12 Mbps, provides two independent PROFIBUS channels via 9-pin D-Sub female connectors, and runs on the ColdFIRE 5272 processor. It is compatible with 3.3 V/5 V PCI buses, offers CommDTM, DLL, and OPC DA interfaces, and is designed for Windows XP through Windows 8/8.1 and selected Windows Server versions. Operating temperature range is 0 °C to +60 °C.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Product Type | PROFIBUS network interface card |
| Series | SST PB3 / 112011 |
| Channels | 2 |
| Protocol Support | PROFIBUS DPV0 Master, DPV0 Slave, DPV1 Master |
| Data Rate | 9.6 kbps to 12 Mbps |
| Bus Interface | Universal PCI 3.3 V / 5 V |
| Network Connector | PROFIBUS 9-pin D-Sub female |
| Processor | ColdFIRE 5272 |
| Software Interfaces | CommDTM, DLL, OPC DA |
| Supply Voltage | 3.3 V / 5 V (from PCI bus) |
| Typical Current Draw | 600 mA @ 5 V; 800 mA @ 3.3 V |
| Isolation | 1000 V |
| Operating Temperature | 0 °C to +60 °C |
| Storage Temperature | –40 °C to +85 °C |
| Humidity | 5 % to 95 % non-condensing |
| Net Weight | 140 g |
| Approvals | CE certified |
| EMC | EN 61000-3-2, EN 61000-3-3, IEC 61000-6-2 |
Detailed Product Overview
The Molex SST-PB3-PCU-2-B provides industrial PCs with direct, high-performance access to PROFIBUS DP networks. Installed in a standard PCI slot, the card offloads protocol handling to its onboard ColdFIRE 5272 processor, allowing the host system to act simultaneously as a DP master, DP slave, or to exchange FDL (Layer 2) messages. Master Class 1 and Class 2 messaging are supported, enabling both cyclic process data exchange and acyclic services required for configuration and diagnostics.
Two independent channels allow a single card to connect to separate PROFIBUS segments or to provide redundancy in critical applications. Each channel uses a standard 9-pin D-Sub female connector and maintains 1000 V galvanic isolation, protecting the host PC from ground potential differences and electrical noise common in industrial environments. The card supports the full range of PROFIBUS baud rates up to 12 Mbps.
Software integration is achieved through DLL/LIB libraries for custom control applications, CommDTM for FDT-based device configuration and diagnostics, and OPC DA for supervisory systems. Supported host operating systems include Windows XP, Vista, 7, 8/8.1, and Windows Server 2003, 2008, and 2012. Firmware modules are downloadable, allowing the card’s behavior to be updated or specialized according to application requirements.
Physical installation follows standard PCI practices. The card measures 4.2 in height by 6.875 in width and draws power solely from the PCI bus. Operating temperature is limited to 0 °C to +60 °C with non-condensing humidity between 5 % and 95 %. These characteristics make the SST-PB3-PCU-2-B suitable for industrial PCs used in process control, manufacturing, and machine automation environments that require reliable PROFIBUS connectivity.

SST-PB3-PCU-2-B

SST-PB3-PCU-2-B
Dimensions, Mounting & Connection Notes
- Dimensions: Height 4.2 in (106.7 mm), Width 6.875 in (174.6 mm)
- Weight: 140 g
- Mounting: Standard PCI slot (universal 3.3 V/5 V)
- Network connectors: Two independent 9-pin D-Sub female (PROFIBUS)
- Isolation: 1000 V
- Operating environment: 0 °C to +60 °C, 5 %–95 % relative humidity non-condensing
- Storage: –40 °C to +85 °C
Installation requires a free PCI slot, proper electrostatic discharge precautions, and correct termination on the PROFIBUS network when the card is at a segment end.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Host Bus | Universal PCI 3.3 V / 5 V | Compatible with PCI 2.2 and 2.3 systems; limited support on some PCI 2.1 systems that supply 3.3 V |
| Operating Systems | Windows XP, Vista, 7, 8/8.1, Server 2003/2008/2012 | Drivers and libraries supplied for these platforms |
| Software Interfaces | CommDTM, DLL, OPC DA | Required for configuration, control, and supervisory access |
| Network | PROFIBUS DP (DPV0/DPV1) | Standard RS-485 physical layer; 9-pin D-Sub female connectors |
| Isolation | 1000 V galvanic isolation per channel | Protects host from field-side electrical disturbances |
| Power | Supplied by PCI bus (3.3 V / 5 V) | Typical draw 600 mA @ 5 V or 800 mA @ 3.3 V |
| Firmware | Downloadable firmware modules | Loaded via host software tools |
FAQ
What is the Molex SST-PB3-PCU-2-B?
It is a dual-channel PROFIBUS DP master/slave network interface card for universal PCI slots in industrial PCs.
Which protocols does it support?
PROFIBUS DPV0 Master, DPV0 Slave, and DPV1 Master, including Master Class 1 and Class 2 messaging and FDL Layer 2 services.
What data rates are supported?
All standard PROFIBUS rates from 9.6 kbps to 12 Mbps.
How many channels does the card provide?
Two independent PROFIBUS channels, each with its own 9-pin D-Sub female connector and 1000 V isolation.
Which PCI voltages does it accept?
Universal PCI supporting both 3.3 V and 5 V signaling and power.
What software interfaces are available?
CommDTM for FDT environments, DLL/LIB for custom applications, and OPC DA for supervisory systems.
What is the operating temperature range?
0 °C to +60 °C.
What is the typical power consumption?
Approximately 600 mA at 5 V or 800 mA at 3.3 V from the PCI bus.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626