Sale!

Motorola MVME162-212 | MVME162LX VME Embedded Controller

The Motorola MVME162-212 is an MVME162LX 200 Series VMEbus embedded controller designed to operate as the processor module in a VME-based control or computing system. It combines a 25 MHz MC68LC040 32-bit microprocessor, 4 MB of parity-protected DRAM, 128 KB of battery-backed SRAM, and 1 MB of flash memory on a double-high VME module.

Description

Core Product Summary

The Motorola MVME162-212 is an MVME162LX 200 Series VMEbus embedded controller designed to operate as the processor module in a VME-based control or computing system. It combines a 25 MHz MC68LC040 32-bit microprocessor, 4 MB of parity-protected DRAM, 128 KB of battery-backed SRAM, and 1 MB of flash memory on a double-high VME module.

This exact configuration includes an Ethernet interface, four EIA-232-D serial ports, two IndustryPack (IP) sites, six tick timers, watchdog-timer functions, and a factory-installed VMEbus interface. It is intended for embedded-control applications where local processing, serial device communication, Ethernet connectivity, and modular I/O expansion through IndustryPack modules are required.

 

Key Technical Specifications

Parameter Motorola MVME162-212
Manufacturer Motorola Computer Group
Product type VMEbus embedded controller / single-board computer
Product series MVME162LX 200 Series
Exact model configuration MVME162-212
Microprocessor MC68LC040, 25 MHz, 32-bit
Processor cache 8 KB
Memory management unit Included
Floating-point coprocessor Not included; the MC68LC040 variant omits the FPU
DRAM 4 MB shared, parity-protected DRAM on a mezzanine module
SRAM 128 KB, battery-backed
Flash memory 1 MB
Nonvolatile RAM / clock 8 KB NVRAM with battery-backed time-of-day clock
Serial ports Four EIA-232-D DTE ports
Serial controller Zilog Z85230
Ethernet interface Intel 82596CA LAN transceiver interface with 32-bit local-bus DMA
IndustryPack sites Two single-size IP sites, or one double-size IP site
Timers Four 32-bit programmable tick timers plus two VMEchip2 tick timers
Watchdog timer Provided in the MCchip ASIC and VMEchip2 ASIC
VMEbus interface Factory-installed VMEchip2 interface
VMEbus system controller Supported, jumperable
VMEbus data transfer D8, D16, and D32 processor transfers; DMA supports D16, D32, D16/BLT, D32/BLT, and D64/MBLT
VMEbus addressing A16/A24/A32 for local-bus-to-VMEbus access; A24/A32 for VMEbus-to-local-bus access
Power requirement, without IP modules +5 VDC ±5%, 3.5 A typical / 4.5 A maximum; +12 VDC ±5%, 100 mA maximum; -12 VDC ±5%, 100 mA maximum
Operating temperature 0 to 70°C exit air with forced-air cooling
Storage temperature -40 to +85°C
Relative humidity 5% to 90%, noncondensing
Board format Double-high VME module
Physical dimensions, board with connectors and front panel 10.3 in × 7.4 in × 0.80 in (262 mm × 188 mm × 20.32 mm)

 

Engineering Selection Highlights

  • The MVME162-212 uses an MC68LC040 processor, which includes cache and an MMU but not a floating-point coprocessor; applications requiring hardware floating-point execution should use an MC68040-based MVME162LX variant instead.
  • Its 4 MB parity-protected DRAM is provided on a mezzanine module, so memory capacity and memory protection are fixed by this exact board configuration rather than by a generic MVME162 specification.
  • The included Ethernet interface provides LAN connectivity through the Intel 82596CA controller and uses DMA transfers to local RAM.
  • Four EIA-232-D DTE serial ports are available through RJ45 front-panel connectors, eliminating the need for a separate transition module for basic serial I/O.
  • Two IndustryPack sites support either two single-size IP modules or one double-size IP module, providing a defined path for application-specific I/O expansion.
  • The factory-installed VMEbus interface supports system-controller, requester, interrupter, interrupt-handler, map-decoder, and DMA functions; it cannot be added in the field to a non-VME version.
  • The module requires forced-air cooling; the documented operating limit is expressed as 0 to 70°C exit air, not simply ambient cabinet temperature.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
VMEbus system VMEbus Specification IEEE 1014-87 The module is designed for VMEbus-based systems.
VMEbus interface Factory-installed VMEchip2 interface This model includes VMEbus functionality; the interface cannot be field-added to a no-VME variant.
System controller Jumperable VMEbus system-controller function Set the system-controller selection before installation in a VME chassis.
Serial connections Four EIA-232-D DTE ports on RJ45 front-panel connectors Use appropriate RJ45 serial cabling or adapters for DB25 DTE/DCE equipment.
Ethernet connection 15-pin front-panel Ethernet LAN connector, Intel 82596CA controller The Ethernet interface uses DMA and should not be programmed to access the VMEbus.
IndustryPack expansion Two IP sites; supports two single-size IPs or one double-size IP IP modules connect through 50-pin connectors behind the front panel.
Firmware MVME162Bug debugger/monitor firmware in flash memory The onboard firmware supports startup, diagnostics, boot configuration, and debugger functions.
Operating system Requires an operating system for a complete system The module is a controller board, not a complete stand-alone computer system.
Cooling Forced-air cooling required Airflow and adjacent-board heat dissipation affect the temperature seen by the module.

 

Dimensions, Mounting & Connection Notes

  • The MVME162-212 is a double-high VME module.
  • With connectors and front panel installed, the module measures 10.3 inches high, 7.4 inches deep, and 0.80 inch thick (262 mm × 188 mm × 20.32 mm).
  • The board mounts in a compatible VMEbus card cage through its VME P1/P2 connectors.
  • Four RJ45 connectors on the front panel provide the EIA-232-D serial-port connections.
  • A 15-pin front-panel connector provides the Ethernet LAN port.
  • IndustryPack I/O is routed through 50-pin connectors located behind the front panel.
  • Front-panel controls include RESET and ABORT pushbutton switches.
  • Front-panel indicators include FAIL, RUN, SCON, and FUSES status LEDs.
  • The module requires forced-air cooling; Motorola’s cooling guidance identifies 10 CFM and 490 LFM airflow over the controller as generally adequate under the described conditions.
MVME162-212

MVME162-212

MVME162-212

MVME162-212

Detailed Product Overview

The Motorola MVME162-212 is a member of the MVME162LX 200 Series embedded-controller family. It is a double-high VMEbus module built around a 25 MHz MC68LC040 32-bit microprocessor with 8 KB of cache and an integrated memory-management unit. Unlike the MC68040 versions in the same family, the MC68LC040 does not include an on-chip floating-point coprocessor, so numerical workloads that depend on hardware floating-point execution should be evaluated against an MC68040-based variant.

The board includes 4 MB of shared parity-protected DRAM on a mezzanine module, 128 KB of battery-backed SRAM, 1 MB of flash memory, and an 8 KB battery-backed NVRAM with a real-time clock. This memory arrangement supports local program execution and retention of configuration or time-related data across power interruptions, subject to battery condition and system design.

For communications, the MVME162-212 includes four EIA-232-D DTE serial ports implemented with Zilog Z85230 controllers and presented on RJ45 front-panel connectors. It also includes an Ethernet interface based on the Intel 82596CA controller, with DMA access to local RAM. The Ethernet port is provided through a 15-pin front-panel connector.

The module provides two IndustryPack logic-interface sites. These support either two single-size IndustryPack modules or one double-size module, allowing the controller to be matched to application-specific digital, analog, communication, or other IP-based I/O requirements. The IP interface supports 16- or 32-bit data widths, two interrupt levels, four DMA channels, and an 8 MHz IP clock for this 200 Series configuration.

The VMEbus interface is factory installed and implemented with the VMEchip2 ASIC. It provides master and slave interfaces, programmable map decoders, DMA, interrupter and interrupt-handler functions, a requester, global control-and-status registers, and a jumperable system-controller function. Processor transfers support D8, D16, and D32 widths, while DMA transfers can use block-transfer and D64/MBLT modes where configured.

The board includes six tick timers in total: four provided by the MCchip ASIC and two by the VMEchip2 ASIC. Watchdog-timer functions are also available. These resources support periodic interrupts, timeout supervision, and system-level fault-handling logic under software control.

Installation requires attention to cooling and system configuration. Motorola specifies operation with 0 to 70°C exit air under forced-air cooling, and notes that the actual thermal margin depends on inlet air temperature, airflow, IP-module selection, and heat dissipation from adjacent boards. The VMEbus system-controller setting, SRAM backup-power source selection, EPROM/flash configuration, and IP installation should be checked before placing the module into service.

 

Applications & System Role

The MVME162-212 serves as the central embedded-processing module in a VMEbus control system. It executes application software, manages local memory and peripherals, communicates with serial devices and Ethernet networks, and exchanges data with other VME modules through the VMEchip2 interface.

Its two IndustryPack sites allow the base controller to be extended with modular I/O functions, while its four serial ports support operator terminals, field devices, diagnostic equipment, or other serial-connected equipment. The Ethernet interface supports networked startup and communication functions supported by the onboard 162Bug firmware, including ARP/RARP, BOOTP, TFTP, and network boot capabilities.

This exact configuration is appropriate where a VME system needs a compact processor module with integrated Ethernet and serial communications, but does not require SCSI storage interfacing or a hardware floating-point unit.

 

FAQ

What is thola ?
It is an MVME162LX 200 Series VMEbus embedded controller with a 25 MHz MC68LC040 processor, 4 MB DRAM, Ethernet, four serial ports, and two IndustryPack sites.

Which processor does the MVME162-212 use?
It uses a 25 MHz Motorola MC68LC040 32-bit microprocessor with 8 KB of cache and an MMU.

Does the MVME162-212 include a floating-point unit?
No. The MC68LC040 processor used in this model does not include a floating-point coprocessor.

How much memory does it have?
It has 4 MB of shared parity-protected DRAM, 128 KB of battery-backed SRAM, 1 MB of flash memory, and 8 KB of battery-backed NVRAM with a real-time clock.

Which communications interfaces are included?
It includes four EIA-232-D DTE serial ports and an Ethernet interface based on the Intel 82596CA controller.

Does it support IndustryPack modules?
Yes. It provides two IndustryPack sites and supports either two single-size IP modules or one double-size IP module.

Does it include a VMEbus interface?
Yes. The MVME162-212 includes a factory-installed VMEchip2 VMEbus interface with system-controller, requester, interrupter, interrupt-handler, map-decoder, and DMA functions.

What cooling requirement applies?
The module requires forced-air cooling and is specified for 0 to 70°C exit-air temperature under the documented cooling conditions.