Sale!

Motorola MVME162-213 VMEbus Embedded Controller

The Motorola MVME162-213 is a double-high (6U) VMEbus embedded controller from the MVME162 series. It is based on a 25 MHz MC68LC040 microprocessor and provides 4 MB of parity-protected DRAM together with onboard SCSI and Ethernet interfaces plus two IndustryPack expansion sites.

Description

Core Product Summary

The Motorola MVME162-213 is a double-high (6U) VMEbus embedded controller from the MVME162 series. It is based on a 25 MHz MC68LC040 microprocessor and provides 4 MB of parity-protected DRAM together with onboard SCSI and Ethernet interfaces plus two IndustryPack expansion sites.

The module functions as a complete single-board computer for industrial and real-time control systems. It includes battery-backed SRAM, Flash memory, serial ports, tick timers, a watchdog timer, and full VMEbus master/slave capability with system-controller support. It is designed for installation in standard 6U VME card cages and is compatible with the 162Bug firmware monitor and common 68K real-time operating systems.

 

Key Technical Specifications

Parameter Specification
Product type Double-high (6U) VMEbus embedded controller / single-board computer
Processor 25 MHz MC68LC040 (8 KB cache + MMU; no floating-point unit)
DRAM 4 MB parity-protected, shared with VMEbus and local bus
SRAM 512 KB with battery backup
Flash memory 1 MB
EPROM One JEDEC 32-pin PLCC socket
NVRAM / TOD clock 8K × 8 with battery backup
Expansion 2 IndustryPack (IP) sites
Mass storage interface SCSI (NCR 53C710 controller with local-bus DMA)
Network interface Ethernet (Intel 82596CA controller)
Serial ports EIA-232-D / EIA-530 capable
VMEbus interface A16/A24/A32 addressing, D8/D16/D32 data widths; system controller capable
Timers Multiple 32-bit tick timers + watchdog timer
Form factor Double-high VME module
Power requirements (typical, no IPs) +5 V ±5 % at 3.5 A (4.5 A max); ±12 V limited current
Operating temperature 0 °C to 55/70 °C (with forced-air cooling)
Storage temperature –40 °C to +85 °C
Relative humidity 5 % to 90 % non-condensing

 

Detailed Product Overview

The MVME162-213 belongs to the Motorola MVME162 family of VMEbus single-board computers. It integrates a 25 MHz MC68LC040 processor, memory subsystem, peripheral controllers, and a full VMEbus interface on a double-high Eurocard. The MC68LC040 provides an 8 KB cache and memory-management unit but omits the floating-point unit found on full MC68040 variants.

Four megabytes of parity-protected DRAM are shared between the local processor bus and the VMEbus, supporting efficient data movement. Battery-backed SRAM (512 KB) and a time-of-day clock preserve critical data and timekeeping across power cycles. One megabyte of Flash memory holds firmware or application code, with an additional EPROM socket available for alternative boot devices.

Onboard I/O includes a SCSI interface based on the NCR 53C710 controller (with DMA) for mass-storage attachment and an Ethernet interface based on the Intel 82596CA controller for network connectivity. Two IndustryPack sites allow addition of specialized I/O modules without consuming additional VME slots. Serial communications are handled through EIA-232-D or EIA-530 ports, typically brought out via a transition module such as the MVME712 series.

The VMEchip2 ASIC implements the VMEbus interface, providing master and slave capabilities, DMA, interrupter and interrupt-handler functions, and optional system-controller features (arbitration, SYSCLK, etc.). The module can be configured as the system controller via a front-panel or onboard jumper. Multiple programmable tick timers and a watchdog timer support real-time scheduling and system integrity monitoring.

The board is intended for embedded monitoring, control, and data-acquisition applications that require a compact, self-contained VME processor with integrated storage and networking. It is commonly used with the Motorola 162Bug debug/monitor firmware and is compatible with several 68K real-time operating systems.

MVME162-213

MVME162-213

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Chassis / backplane Standard 6U VME card cage with P1 (and normally P2) connectors Double-high module; requires full 6U height slot
System controller role Configurable via jumper (factory default usually enabled) Remove jumper if another board is to act as system controller
I/O transition MVME712-series transition modules or equivalent P2 adapter Routes serial, SCSI, Ethernet, and other signals to rear connectors
IndustryPack modules Up to two single-size or one double-size IndustryPack Power and signal limits must be observed for the installed IPs
Firmware / software 162Bug monitor; compatible with VxWorks, pSOS, OS-9 and similar 68K RTOS Boot and diagnostic functions provided by onboard firmware
Power +5 V primary from VME backplane; ±12 V for certain peripherals Typical consumption approximately 3.5 A at +5 V without IndustryPacks

 

Dimensions, Mounting & Connection Notes

  • Board outline (typical Eurocard): approximately 233 mm (height) × 160 mm (depth)
  • Overall with front panel: approximately 262 mm height
  • Form factor: Double-high (6U) VME module
  • Mounting: Standard VME card-cage slot; secured by front-panel screws
  • Primary connectors: VME P1 (and P2) backplane connectors
  • Front-panel indicators: Multiple status LEDs (including FAIL, RUN, SCON, SCSI, LAN, etc.) plus ABORT and RESET push-buttons
  • Cooling: Forced-air cooling required for reliable operation at the upper end of the temperature range

 

FAQ

What is the Motorola MVME162-213?
It is a double-high (6U) VMEbus embedded controller based on a 25 MHz MC68LC040 processor with 4 MB DRAM, SCSI, Ethernet, and two IndustryPack sites.

What processor does the MVME162-213 use?
A 25 MHz MC68LC040 microprocessor that includes an 8 KB cache and memory-management unit (no floating-point unit).

How much memory is installed?
4 MB of parity-protected DRAM, 512 KB of battery-backed SRAM, 1 MB of Flash, plus an EPROM socket and battery-backed NVRAM/time-of-day clock.

Does the MVME162-213 include SCSI and Ethernet?
Yes. It includes an NCR 53C710 SCSI controller and an Intel 82596CA Ethernet controller.

How many IndustryPack sites are available?
Two IndustryPack expansion sites are provided.

What form factor does the board use?
It is a double-high (6U) VMEbus module designed for standard VME card cages.

Can the MVME162-213 act as the VMEbus system controller?
Yes. System-controller functions are supported and are typically enabled or disabled by an onboard jumper.