Sale!

Motorola MVME2434 PowerPC 750 VME Processor Module

  • Model: MVME2434
  • Brand: Motorola
  • Series: MVME2400 Series (PowerPlus II Architecture)
  • Core Function: High-performance VMEbus single-board computer for heavy industrial control.
  • Product Type: VME Processor Module
  • Key Specs: 350 MHz MPC750 | 256MB ECC SDRAM | 1MB L2 Cache
  • Condition: New Original / New Surplus (Never refurbished).
  • Inventory Status: Legacy / Obsolete EOL item requiring managed strategic buffer stocking.
Categories: , , , , SKU: MVME2434 Brand:

Description

Key Technical Specifications

Parameter Value
Microprocessor PowerPC 750 (32-bit RISC) at 350 MHz
Level 1 Cache 32 KB instruction cache / 32 KB data cache
Level 2 Cache 1MB backside L2 cache
System Memory (SDRAM) 256MB on-board ECC SDRAM
Flash Memory 8MB surface-mount Flash + 1MB via two 32-pin sockets
VMEbus Interface Tundra Universe 2.0 PCI-to-VME bridge, A32/D32/BLT64
Ethernet Interface 10/100 Mb/s Ethernet port (DEC 21143 controller)
Mezzanine Expansion Two IEEE P1386.1 compliant 32/64-bit PMC slots with P2 I/O
Serial Ports One asynchronous serial debug port (16550 compatible)
Non-Volatile Storage 8K x 8 NVRAM with time-of-day clock and battery backup
Operating Temperature 0 to +55°C (Standard industrial ambient)
Power Requirements +3.3V, +5V, +12V, −12V DC backplane supply

 

Product Introduction & Supply Chain Strategy

The Motorola MVME2434 is a robust 32-bit VMEbus single-board computer driven by a 350 MHz PowerPC 750 processor and 256MB of ECC SDRAM. Built on the PowerPlus II architecture, it provides deterministic real-time processing, high-speed PCI-to-VME bridge management via the Universe 2 controller, and flexible peripheral expansion through dual PMC slots. Facilities in energy, manufacturing, and defense deploy this module to run complex supervisory applications while preserving legacy VME rack infrastructure.

Procuring this component as a Brand New Surplus unit neutralizes the severe operational risks tied to secondary-market hardware. Because the MVME2434 is long discontinued by the OEM, unverified third-party parts often feature degraded capacitors, hidden solder fractures, or unlogged thermal stress. Deploying certified New Surplus inventory guarantees OEM-level longevity, prevents unplanned production outages, and protects plant capital efficiency by lowering Total Cost of Ownership (TCO).

MVME2434

MVME2434

MVME2434

MVME2434

Installation & Configuration Guide

Stage 1: Pre-Installation (Prep & Safety)

  1. Execute plant Lock-Out/Tag-Out (LOTO) protocols for the targeted VME rack.
  2. Put on an ESD-safe grounded wrist strap before touching any hardware components.
  3. Document all existing front-panel cable attachments and record current onboard switch and jumper configurations.

Stage 2: Removal

  1. Unlatch the top and bottom front-panel injector/ejector handles to disengage the module from the VME backplane P1/P2 connectors.
  2. Slide the card smoothly out of the chassis guide slots, ensuring no impact to adjacent circuit boards or backplane pins.

Stage 3: Installation (Clone & Seat)

  1. Replicate all jumper settings and switch positions exactly from your pre-installation documentation onto the new MVME2434 module.
  2. Align the board edges with the top and bottom card rails of the target slot.
  3. Push the module evenly into the rack until the connectors seat firmly, then close the ejector handles to lock the board in place.

Stage 4: Power-On & Testing

  1. Re-energize the rack and observe the front-panel status LEDs during the boot sequence.
  2. Access the onboard debug monitor via the front serial port to run basic hardware diagnostics and verify memory integrity.
  3. Load the operational system image, check network handshakes, and confirm successful communication across the VMEbus backplane.

 

Firmware/Software Versions & Upgrade Notes

  • Recommended Firmware: Pre-loaded PPCBUG or target application boot firmware matching your system’s software baseline.
  • Compatibility Warnings: Verify that your software image supports the 350 MHz clock speed and memory configuration. Upgrading operating system kernels without matching board support package (BSP) revisions can cause bus timeouts.
  • Upgrade Risk Advisory: Avoid performing firmware updates during active production cycles. Always flash and validate software updates on a bench-test rack prior to live deployment.

 

Frequently Asked Questions (FAQ)

Why is this unit priced higher than refurbished alternatives found online?

Our pricing reflects the exact cost of sourcing genuine New Surplus inventory from verified global channels. While refurbished options look attractive initially, they introduce high risk. Our inventory guarantees zero operational wear, original anti-static packaging, and complete operational peace of mind.

Is this unit an original factory-sealed part?

Yes. This product is a Brand New Surplus unit. It has never been deployed in an active plant, never pulled from a decommissioned system, and never repaired. It arrives in original manufacturing condition with clean, un-worn backplane pins.

What is the obsolescence status of the MVME2434?

This module is officially obsolete and out of production. Because active factory channels are closed, holding 1-2 new units on-site as buffer stock is critical to avoid lengthy downtime when legacy hardware fails.

Can I hot-swap this VME processor module?

No. VMEbus architecture and physical pin connections do not permit safe live insertion or extraction. You must power down the entire VME chassis before servicing or replacing this module.

Will my application binaries and configurations be retained?

The board ships with standard diagnostic monitor firmware. User programs, operating system images, and network configurations must be loaded post-installation. Non-volatile parameters are stored in the on-board NVRAM.

What warranty terms apply to this New Surplus module?

This unit includes a comprehensive 1-year replacement warranty, validating our commitment to uncompromised industrial reliability and supply-chain transparency.