Description
Core Product Summary (Brand / Model / Key Attributes)
The National Instruments SCXI-1320 is a high-voltage, front-mount terminal block designed to interface field wiring with select National Instruments isolated analog input and signal conditioning modules, such as the SCXI-1120, SCXI-1121, and SCXI-1125. Housed in a fully shielded metal enclosure, the unit features eighteen screw terminals—including sixteen signal connections (eight pairs) and two functional/safety earth-ground terminals—to ensure clean signal routing and robust noise rejection in industrial measurement applications.
Engineered to support precise thermal and electrical measurements, the SCXI-1320 integrates an onboard LM35CAZ integrated circuit temperature sensor to provide accurate cold-junction compensation (CJR) for thermocouple measurements. It accepts wire gauges up to 16 AWG and mounts securely to the front of compatible SCXI modules via dual captive thumbscrews. The terminal block is built to meet Installation Category II safety standards for electrical measurement and test environments.
Key Technical Specifications
| Specification | Value / Detail |
|---|---|
| Product Type | Front-Mount High-Voltage Terminal Block |
| Total Screw Terminals | 18 terminals (16 signal terminals / 8 pairs, 2 functional/safety ground terminals) |
| Supported Wire Gauge | Up to 16 AWG |
| Terminal Spacing | 0.5 cm (0.2 in.) center-to-center |
| Cold-Junction Sensor Type | Integrated circuit (LM35CAZ) |
| Temperature Sensor Output | 10 mV/°C (0 to 0.5 VDC range from 0 to 50 °C) |
| Sensor Accuracy | ±1.3 °C from 0 to 50 °C |
| Signal Coupling | DC coupling |
| Maximum Working Voltage | Up to 300 Vrms or ±300 VDC (channel-to-ground and channel-to-channel) |
| Enclosure & Shielding | Fully shielded metal housing with integrated cable strain-relief clamp |
| Mounting Method | Front-mount with dual captive thumbscrews |
Detailed Product Overview
The National Instruments SCXI-1320 serves as a critical physical connection bridge between external industrial sensors and modular signal conditioning hardware. In high-voltage or noise-prone measurement environments, maintaining signal integrity and operator safety requires structured termination. The SCXI-1320 addresses this by enclosing signal connections inside a rugged metal shield that suppresses electromagnetic interference (EMI) while organizing incoming field leads.
Designed specifically to complement isolated modules like the SCXI-1120, SCXI-1121, and SCXI-1125, the terminal block handles signal configurations ranging from standard analog voltage inputs to thermocouple channels. For thermocouple applications, the onboard LM35CAZ sensor continuously monitors terminal temperature, supplying precise cold-junction compensation data to the system software. Integrated mechanical strain relief secures incoming cable bundles to prevent tension or vibration from fatiguing individual wire connections at the screw terminals.

SCXI-1320

SCXI-1320
Engineering Selection Highlights
- Built-In Cold-Junction Reference: Features an integrated LM35CAZ temperature sensor delivering 10 mV/°C10 mV/°C10 mV/°C to support accurate thermocouple measurements.
- High-Voltage Isolation Support: Engineered for Installation Category II environments, maintaining working isolation up to 300 Vrms or ±300 VDC\pm 300 VDC±300 VDC between channels and ground.
- Shielded Termination Design: Fully enclosed metallic housing reduces external noise coupling and preserves measurement accuracy for low-level signals.
- Dedicated Grounding Provision: Includes specific functional and safety earth-ground terminals alongside 16 signal connection points.
- Secure Mechanical Retention: Mounts directly onto the front panel of compatible modules using captive thumbscrews, complemented by an integrated cable strain-relief bar.
Dimensions, Mounting & Connection Notes
- Physical Dimensions: 17.8 cm×7.94 cm×3.0 cm17.8 cm \times 7.94 cm \times 3.0 cm17.8 cm×7.94 cm×3.0 cm (7.0 in.×3.125 in.×1.2 in.7.0 in. \times 3.125 in. \times 1.2 in.7.0 in.×3.125 in.×1.2 in.)
- Weight: 200 g200 g200 g (7 oz7 oz7 oz)
- Mounting Procedure: Align the rear mating connector with the front pin header of the target SCXI module and secure by tightening the top and bottom thumbscrews.
- Strain Relief: Anchor the outer cable jacket securely using the integrated strain-relief bar to protect internal screw connections from mechanical pull forces.
- Operating Limits: Rated for indoor use in 0 °C to 50 °C environments with 10% to 90% non-condensing relative humidity (Installation Category II).
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Compatible Modules | NI SCXI-1120, SCXI-1120D, SCXI-1121, SCXI-1125, SCXI-1126 | Mounts directly to the front connector interface of these specific signal conditioning modules. |
| Chassis Requirement | UL-listed SCXI Chassis | Must be installed within a properly grounded, compliant SCXI enclosure. |
| Field Conductor Size | Up to 16 AWG copper wire | Strip insulation cleanly (maximum 7 mm) to prevent exposed wire strands from causing short circuits. |
FAQ
What is the NI SCXI-1320?
The NI SCXI-1320 is a shielded, front-mount high-voltage terminal block designed to provide secure signal connections and cold-junction temperature sensing for compatible National Instruments SCXI isolation modules.
Which modules are compatible with the SCXI-1320?
It is officially compatible with the NI SCXI-1120, SCXI-1120D, SCXI-1121, SCXI-1125, and SCXI-1126 signal conditioning modules.
How does the terminal block support thermocouple measurements?
It includes an integrated LM35CAZ circuit sensor that measures terminal temperature and outputs 10 mV/°C10 mV/°C10 mV/°C for software-based cold-junction compensation.
How many terminals does the SCXI-1320 feature?
It features 18 screw terminals in total, consisting of 16 signal connections (arranged in 8 pairs) and 2 functional/safety ground terminals.
What maximum voltage limits apply to this terminal block?
It supports working voltages up to 300 Vrms or ±300 VDC\pm 300 VDC±300 VDC channel-to-channel and channel-to-ground under Installation Category II guidelines.
Verification & Troubleshooting Notes
- Cold-Junction Verification: If thermocouple temperature readings drift or appear inaccurate, verify that software calibration factors match the 10 mV/°C10 mV/°C10 mV/°C output scaling of the built-in LM35CAZ sensor and ensure the chassis is kept away from extreme localized heat sources.
- Terminal Inspection: Check that all field wires are stripped properly (under 7 mm) with no exposed copper extending past the screw terminals to prevent cross-channel shorts.
- Shielding and Grounding: Ensure the safety-ground lug and housing make solid electrical contact with the module frame to preserve common-mode noise rejection and safety isolation.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626